SAR Scenario Gladstone Pickup Grain

From TrainzOnline
Revision as of 21:35, 18 October 2022 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png   18   Gladstone Pickup Grain  ArrowRightBtn.png
A scenario in the SAR Peterborough Base Session v2.0
A seasonal pickup service delivering grain to Gladstone from Peterborough and Wilmington. Bottom

 The Historical Bit 

The  Terowie-Peterborough-Quorn Line  was roughly the dividing line in the state of South Australia between the grain producing region and the cattle and sheep grazing region. West of the line there was enough rain to produce one crop of grain each year. East of the line the country was too dry for crops and could only be used for grazing.

The grain storage silos followed this pattern with many of the locations west of Peterborough (towards Port Pirie) equipped with grain loaders while locations east (towards Broken Hill) had only livestock loading facilities.


Gladstone Grain
 Era:  1960s
 Duration:  2 hours 30 minutes
 Loco:  The Loco Roster Label.png has locos available at the  Peterborough Loco Depot 

The Loco Roster Label.png has locos available at the  Gladstone Loco Depot 

 Consist:  To be attached to the selected loco

From Peterborough:-

  • 1 Guard Van in the  Peterborough Car Shed 
  • WHE Gondola covered wagons at Yongala, Jamestown and Caltowie  Grain Silos 

From Gladstone:-

Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of your selected loco, for example SAR T 23 (or just T 23 which should be enough), then click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 23) OR
    • the driver icon (named Driver 23) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco.
  3. Take a few moments to get your bearings. Click Peterborough Data (this link will open in this window) to show the location details and track plans for Gladstone. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location details page has direct links to the adjacent locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to Driver Mode and either close the opening message window or press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:
  1. For services starting from Peterborough move to the  Car Shed  and couple to an available Guard Van
  2. For services starting from Gladstone move to the  Goods Siding  and couple to the empty WHE wagons and GV guard van
  3. Proceed according to the working timetable shown below
  4. Services along the Wilmington Line are to load and drop wagons at the specified silos for collection on the return trip. Take coal and water as required. Turn the loco on the  WYE  at Booleroo Centre (if terminating there) or at Wilmington
  5. Services from Peterborough are to collect loaded WHE wagons at the locations indicated. Take coal and water if required at Jamestown
  6. At Gladstone deliver the wagons and guard van to a storage siding at the  Grain Loader 
  7. Coal and water the loco (if required) and stable at the  Loco Depot 
Logo
 Gladstone Local Grain Timetable 
  Frequency

Train №
(Mon)
(Thu)
GL31
(Tue)
(Fri)
GL33
(Wed)
(Sat)
GL35
(Tue)
(Wed)
GL37
(if required)
(if required)
Gladstone Depot CEFJOWX dep 08:00 08:00   13:30  
Goods Siding   08:05 08:05   13:35 Collect wagons and guard van
Yard dep 08:15 08:15   13:15  
Wirrabara UX arr 09:00 ..   .. Deliver 3 WHE wagons to grain silos. Leave wagons on silo siding
dep 09:07 ..   ..
Booleroo Centre ΔWX arr hh:mmW hh:mmW   hh:mmW Water and turn loco if required
Grain Silos arr hh:mm hh:mm   .. Deliver 6 (GL31) or 3 (GL33) WHE wagons to silos. Leave wagons on silo siding
Grain Terminal arr   ..   hh:mm Deliver 9 WHE wagons (GL37) to grain terminal. Leave wagons on grain terminal spur
Booleroo Centre   dep   hh:mm    
Melrose UX arr   hh:mm     Deliver 3 WHE wagons to silos. Leave wagons on silo siding
Wilmington ΔCEUWX arr   hh:mmCW     Deliver 3 WHE wagons to silos. Leave wagons on silo siding. Coal and Water loco if required. Turn loco
Peterborough Depot CEFJOWX dep     08:00    
Peterborough Car Shed dep     08:mm   Collect guard van
Yangya FUX arr     hh:mm   Collect loaded WHE wagons
Jamestown CFOWX arr     hh:mmCW   Collect loaded WHE wagons. Coal and Water loco if required
  dep     hh:mm    
Caltowie FX arr     hh:mm   Collect loaded WHE wagons
Train № GL32 GL34   GL38  
Wilmington dep   hh:mm     Collect loaded WHE wagons
Melrose dep   hh:mm     Collect loaded WHE wagons
Booleroo Centre dep hh:mm hh:mmW   hh:mm Collect loaded WHE wagons. Water loco if required
Wirrabara dep hh:mm ..   .. Collect loaded WHE wagons
Gladstone Yard arr hh:mm hh:mm hh:mm hh:mm  
Grain Loader arr hh:mm hh:mm hh:mm hh:mm Deliver and unload wagons
Gladstone Depot arr         Coal and Water loco if required. Stable loco
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals J = Junction
O = Loco Turntable U = Unattended W = Loco Water Tank X = Crossing Loop
Strip Map
Route Key
Driving Notes:

Summaries of the facilities and product loads at all locations along these lines are provided in the links
Gladstone-Wilmington Line and Port Pirie-Broken Hill Line

  • The Wilmington Line is not signalled beyond Gladstone Yard. Train Order working is in operation on the line
  • You have been issued with the appropriate orders and the authorisation for the Wilmington Line
  • All facing junctions on the Wilmington Line have a speed limit of 15mph
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
ArrowLeftBtn.png Scenarios
Session Scenarios
Location Index
Location List
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png


This page was created by Trainz user pware in January 2022 and was last updated as shown below.


Personal tools