SAR Scenario Gladstone Pickup Grain

From TrainzOnline
Revision as of 17:21, 15 November 2022 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png   18   Gladstone Local Grain  ArrowRightBtn.png
A scenario in the SAR Peterborough Base Session v2.0
A seasonal grain service collecting grain from local silos for delivery to Gladstone. Bottom

 The Historical Bit 

The  Terowie-Peterborough-Quorn Line  was roughly the dividing line in the state of South Australia between the grain producing region and the cattle and sheep grazing region. West of the line there was enough rain to produce one crop of grain each year. East of the line the country was too dry for crops and could only be used for grazing.

The grain storage silos followed this pattern with many of the locations west of Peterborough (towards Port Pirie) equipped with grain loaders while locations east (towards Broken Hill) had only livestock loading facilities.


Gladstone Grain
 Era:  1960s
 Duration:  2 hours 30 minutes
 Loco:  The Loco Roster Label.png has locos available at the  Peterborough Loco Depot 

The Loco Roster Label.png has locos available at the  Gladstone Loco Depot 

 Consist:  To be attached to the selected loco

From Peterborough:-

  • 1 Guard Van in the  Peterborough Car Shed 
  • WHE Gondola covered wagons at Yongala, Jamestown and Caltowie  Grain Silos 

From Gladstone:-

Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of your selected loco, for example SAR T 23 (or just T 23 which should be enough), then click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 23) OR
    • the driver icon (named Driver 23) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco.
  3. Take a few moments to get your bearings. Click Gladstone Data or Peterborough Data (the links will open in this window) to show the location details and track plans for Gladstone or Peterborough. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location details page has direct links to the adjacent locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to Trainz Driver Mode
  7. Close the opening message window and, if Pause is shown on the screen, press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:
  1. For services starting from Peterborough move to the  Car Shed  and couple to an available Guard Van
  2. For services starting from Gladstone move to the  Goods Siding  and couple to the empty WHE wagons and GV guard van
  3. Proceed according to the working timetable shown below
  4. Services along the Wilmington Line are to load and drop wagons at the specified silos for collection on the return trip. Take Coal/Water if required and available. Turn the loco on the  WYE  at Booleroo Centre (if terminating there) or at Wilmington
  5. Services from Peterborough are to Attach loaded WHE wagons at the locations indicated. Take Coal/Water if required at Jamestown
  6. At Gladstone unload the grain at the  Grain  Silos or  Grain  Terminal as specified in the working timetable
  7. Store the wagons and guard van at  Goods Siding  (if it is vacant) or on the  Grain  Terminal sidings
  8. Coal/Water the loco (if required) and stable at the  Loco Depot 
Logo
The Base Session has the clock set to start at 08:00.
This can be changed to any required time. For the details see SAR Scenario Session Time Change
 Gladstone Local Grain Timetable 
  Frequency
Train №
(Tu Th Sa)
140
(M Th)
240
(W Sa)
241
(M W F)
242
(seasonal - when required)
Gladstone Depot CEFJOWX dep   09:20 09:30 12:05  
Goods Siding     A A A Attach grain wagons and guard van
Yard dep   09:35 09:45 12:20  
Laura ΔUX     09:54 10:04 12:38  
Stone Hut UX     10:07 10:17 12:51  
Wirrabara UX arr   10:21 10:31 13:04 (240) detach 3 WHE wagons at silos
dep   10:30      
Yandiah UX     10:45 10:46 13:20  
Booleroo Centre ΔWX arr   11:01W1 11:02w 13:36w (240) & (242) turn loco if required
silos     D D Detach 6 (240) or 3 (241) WHE wagons at silos
Grain Terminal   arr     D Detach 9 WHE wagons (242) at grain terminal
Booleroo Centre   dep     11:12    
Peroomba U       11:24    
Melrose UX arr     11:36   Detach 3 WHE wagons at silos
dep     11:42    
Terka U       11:58    
Wilmington ΔCEUWX arr     12:09cw   Detach 3 WHE wagons at silos. Turn loco if required
Peterborough Depot CEFJOWX dep 07:50        
Car Shed   dep 08:00       Attach guard van
Yongala FUX arr 08:112       Attach loaded WHE wagons
  dep 08:30        
Belalie North UX   08:41        
Jamestown CFOWX arr 09:07cw       Attach loaded WHE wagons
dep 09:15        
Caltowie FX arr 09:27       Attach loaded WHE wagons
dep 09:32        
Train №   640 641 642  
Wilmington dep     13:18   Attach loaded WHE wagons
Terka     13:28    
Melrose arr     13:40   Attach loaded WHE wagons
dep     13:46    
Peroomba     13:58    
Booleroo Centre ΔWX arr     14:10   Water and turn loco if required
silos     A A Attach WHE wagons at silos
Grain Terminal   arr     A Attach WHE wagons at grain terminal
Booleroo Centre   dep   14:30 14:30 16:30
Yandiah   14:46 14:46 16:45  
Wirrabara arr   15:03 15:00 17:00 (601) Attach loaded WHE wagons
dep   15:12      
Stone Hut   15:26 15:13 17:13  
Laura   15:39 15:26 17:26  
Gladstone Yard arr 09:53 15:58 15:45 17:45  
silos   D     D Detach and unload wagons, store in siding
Grain Terminal     D D  
Gladstone Depot cw cw CW CW Coal/Water loco if required. Stable loco
bold time = arrive/depart time plain time = timing point
Service Symbols:
a on request stop   c coal (if required) w water (if required)
1 Cross Train №660 2 Cross Train №200      
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals J = Junction
O = Loco Turntable U = Unattended W = Loco Water Tank X = Crossing Loop
Strip Map
Route Key
Driving Notes:

Summaries of the facilities and product loads at all locations along these lines are provided in the links
Gladstone-Wilmington Line and Port Pirie-Broken Hill Line

Gladstone-Wilmington Line
  • The Wilmington Line is not signalled beyond Gladstone Yard. Train Order working is in operation on the line
  • You have been issued with orders and the authorisation for the entire Wilmington Line
  • All facing junctions on the Wilmington Line have a speed limit of 15mph
  • Drivers can depart a location earlier than scheduled provided there are no opposing crossing movements at that location
 
Port Pirie-Broken Hill Line
  • Two turntables are available at Peterborough
    • Peterborough  Main Loco Depot 
    • Peterborough  Station Sub Depot 
  • Replacement locos are available at Peterborough  Main Loco Depot 
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
ArrowLeftBtn.png Scenarios
Session Scenarios
Location Index
Location List
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png


This page was created by Trainz user pware in January 2022 and was last updated as shown below.


Personal tools