| 1 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
|
| 2 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
|
| 3 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 4 |
"'$(TAG_NAME)' must have a positive value."
|
| 5 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 6 |
"'$(TAG_NAME)' must not be zero."
|
| 7 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 8 |
"The value for '$(TAG_NAME)' must be between '$(MIN)' and '$(MAX)' but was specified as '$(VALUE)'."
|
| 9 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 10 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 11 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 12 |
"No string-table entry found with tag '$(VALUE)' for for string-token tag '$(TAG)'."
|
| 13 |
"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
|
| 14 |
"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
|
| 15 |
"Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
|
| 16 |
"Container '$(CONT_NAME)' does not have an 'att-parent' tag which is required to reference an attachment point."
|
| 17 |
"Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
|
| 18 |
"Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
|
| 19 |
"Effect '$(EFFECT_NAME)' in '$(CONT_NAME)' was not found within the mesh table."
|
| 20 |
"Mesh '$(MESH_NAME)' referenced in '$(CONT_NAME)' was not found within the mesh table."
|
| 21 |
"Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
|
| 22 |
"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
|
| 23 |
"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
|
| 24 |
"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
|
| 25 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 26 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 27 |
"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have a mesh file extension."
|
| 28 |
"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an image file extension."
|
| 29 |
"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an animation file extension."
|
| 30 |
"The tag '$(TAG_NAME)' in '$(CONT_NAME)' refers to a nonexistent file: '$(FILENAME)'."
|
| 31 |
"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
|
| 32 |
"Alias mesh requires valid parent asset."
|
| 33 |
"Alias mesh '$(FILE)' not found in dependency $(KUID)."
|
| 34 |
"Alias mesh '$(FILE)' not found in latest version ($(NEW_KUID)) of dependency $(OLD_KUID)."
|
| 35 |
"Required alias mesh asset $(KUID) is missing and cannot be validated."
|
| 36 |
"The texture '$(FILE)' failed to load."
|
| 37 |
"The texture '$(FILE)' is not a power of 2, please resize it."
|
| 38 |
"The texture '$(FILE)' is not square. Cubemap textures need to have the same width and height."
|
| 39 |
"The texture '$(FILE)' is a uniform color."
|
| 40 |
"Unable to load $(TYPE) texture '$(TEXTURE)' for texture file '$(FILE)'."
|
| 41 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
|
| 42 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
|
| 43 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Boolean value."
|
| 44 |
"Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
|
| 45 |
"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
|
| 46 |
"Internal Error: The template does not specify that a smoke container is valid in the container being parsed."
|
| 47 |
"Container '$(CONT_NAME)' is not permitted in this section."
|
| 48 |
"This asset uses an obsolete trainz-build number. Trainz-build numbers below $(LOWEST_TRAINZBUILD) are no longer supported."
|
| 49 |
"Required tag 'kind' is not present. Ensure this is a valid config file."
|
| 50 |
"Unsupported kind '$(KIND)'."
|
| 51 |
"Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
|
| 52 |
"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
|
| 53 |
"This container is no longer supported."
|
| 54 |
"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
|
| 55 |
"This container is no longer supported."
|
| 56 |
"Container '$(CONT_NAME)' is not permitted in this section."
|
| 57 |
"Container '$(CONT_NAME)' is not permitted in this section."
|
| 58 |
"The tag '$(TAG_NAME)' is not a valid container type (expected '$(TYPE)')."
|
| 59 |
"Internal error: unknown dataType - kind '$(KIND)'."
|
| 60 |
"Required tag '$(TAG_NAME)' was missing and has been set to default."
|
| 61 |
"Required tag '$(TAG_NAME)' was missing and has been set to default."
|
| 62 |
"Required container '$(CONT_NAME)' is missing."
|
| 63 |
"The cubemap texture '$(FILE)' has missing images. Please verify the texture.txt file."
|
| 64 |
"Cubemap texture '$(FILE)' contains images of different sizes."
|
| 65 |
"The *.texture.txt file is missing for texture resource '$(FILE)'."
|
| 66 |
"The texture file '$(FILE)' contains non-ANSI characters. Textures must be ANSI."
|
| 67 |
"The texture '$(FILE)' does not seem to have a primary texture set. Please verify the texture.txt file."
|
| 68 |
"The primary and alpha texture are not the same size for '$(FILE)'."
|
| 69 |
"Binary conversion failed for texture resource '$(FILE)'."
|
| 70 |
"The KUID tag is not a valid KUID value: '$(string)'."
|
| 71 |
"Unsupported SpeedTree version for mesh: $(FILE)"
|
| 72 |
"Unable to load mesh file: '$(FILE)'"
|
| 73 |
"Image file '$(FILE)' is incorrectly used as both a texture.txt source file and a raw image file."
|
| 74 |
"Image file '$(FILE)' is incorrectly used as both a texture.txt source file and a raw image file."
|
| 76 |
"Unable to load mesh file: '$(FILE)'"
|
| 77 |
"Unable to load indexed mesh '$(FILE)'"
|
| 79 |
"Unable to load animation file '$(FILE)' (mesh has not been loaded correctly)."
|
| 81 |
"The high-poly mesh '$(FILE)' should have LOD levels."
|
| 82 |
"High-detail .im files are not supported for traincar assets, as they are likely to perform poorly. It is recommended that you upgrade '$(FILE)' to a .lm file."
|
| 83 |
"The file '$(FILE)' is provided in LM format despite having no attachment points and no animation support. This may have a negative impact on performance."
|
| 84 |
"The file '$(FILE)' is provided in LM format despite containing only a single mesh. This may have a negative impact on performance."
|
| 85 |
"The file '$(FILE)' is provided in LM format, however the high-detail mesh is comprised of less than 300 polygons. This may have a negative impact on performance."
|
| 86 |
"Legacy .pm files are no longer supported, and will perform poorly. It is recommended that you switch to using a .lm file."
|
| 87 |
"Legacy .pm files are no longer supported, and will perform poorly. It is recommended that you switch to using a .lm file."
|
| 88 |
"This asset has a trainz-build number which is not recognised by this tool."
|
| 89 |
"Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
|
| 90 |
"This asset has an invalid KUID user id"
|
| 91 |
"The dependency $(KUID) has an invalid KUID User ID and cannot be used"
|
| 92 |
"Duplicate '$(TAG_NAME)' containers in '$(CONT_NAME)'. Containers must have a unique name."
|
| 93 |
"Duplicate '$(TAG_NAME)' tags in '$(CONT_NAME)'. Tags must have a unique name."
|
| 94 |
"This asset requires a shadow mesh, but the mesh table does not contain one."
|
| 95 |
"This asset does not have a mesh that is visible by default."
|
| 96 |
"Maximum of 5 running number fonts supported."
|
| 97 |
"The running number font directory '$(DIR)' could not be found."
|
| 98 |
"The running number font file '$(DIR)/$(FILE)' could not be found."
|
| 99 |
"The track-sound container '$(NAME)' has no bogey, track or track-parent tag."
|
| 100 |
"Required tag '$(TAG_NAME)' was missing and has been set to default."
|
| 101 |
"The file '$(FILE)' does not exist."
|
| 102 |
"Failed to load sound file '$(FILE)', please ensure this is a valid wav file."
|
| 103 |
"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
|
| 104 |
"Multiple template property bindings for rule property '$(PROP)' for rule '$(RULE)'."
|
| 105 |
"The template property '$(NAME)' specified in the rule-template-bindings container of rule '$(RULE)' does not exist."
|
| 106 |
"The high-detail meshes in season $(SEASON) total more than $(LIMIT) polygons. This may have a negative impact on performance: $(LOD_SUMMARY)"
|
| 107 |
"The high-detail meshes total more than $(LIMIT) polygons. This may have a negative impact on performance: $(LOD_SUMMARY)"
|
| 108 |
"The low-detail meshes in season $(SEASON) total more than 500 polygons. This may have a negative impact on performance: $(LOD_SUMMARY)"
|
| 109 |
"The low-detail meshes total more than 500 polygons. This may have a negative impact on performance: $(LOD_SUMMARY)"
|
| 110 |
"The meshes in LOD level $(LOD_LEVEL) in season $(SEASON) must total at least 20% fewer polygons than the next higher LOD in the same season: $(LOD_SUMMARY)"
|
| 111 |
"The meshes in LOD level $(LOD_LEVEL) must total at least 20% fewer polygons than the next higher LOD: $(LOD_SUMMARY)"
|
| 112 |
"Multiple track stretches between '$(FROM_VERTEX)' and '$(TO_VERTEX)' in container '$(CONT_NAME)'. Track stretches must be unique."
|
| 113 |
"An image file ('$(FILE)') has been supplied where a texture file ('*.texture.txt') is required."
|
| 114 |
"An image file ('$(FILE)') has been supplied where a texture file ('*.texture.txt') is required."
|
| 115 |
"The texture file '$(FILE)' does not exist."
|
| 116 |
"No texture file has been specified for this texture asset."
|
| 117 |
"'$(TAG_0)' must be set to a '$(KIND)' for '$(TAG_1)' to be allowed."
|
| 118 |
"Tag '$(TAG_0)' requires that '$(TAG_1)' be set to '$(KIND)'."
|
| 119 |
"The tag '$(TAG_NAME)' is not valid for kind '$(KIND)'."
|
| 120 |
"Tag '$(TAG_0)', requires the tag '$(TAG_1)' to be present."
|
| 121 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 122 |
"'$(TAG_NAME)' must have a positive value."
|
| 123 |
"The script file '$(FILE)' does not exist."
|
| 124 |
"The file '$(FILE)' does not exist."
|
| 125 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 126 |
"'$(TAG_NAME)' must not be zero."
|
| 127 |
"No value has been entered for tag '$(TAG_NAME).'"
|
| 128 |
"The value for '$(TAG_NAME)' must be between '$(MIN)' and '$(MAX)' but was specified as '$(VALUE)'."
|
| 129 |
"Incorrect number of values for the tag '$(TAG_NAME)', expected $(NUM_0) values, found $(NUM_1)."
|
| 130 |
"Too many values for the tag '$(TAG_NAME)', maximum is $(MAX) values, found $(FOUND)."]]
|
| 131 |
"Value must be a mesh from the mesh-table (not a parent container)."
|
| 132 |
"The attachment point '$(ATT)' must belong to the parent mesh of the effect (mesh=$(MESH))."
|
| 133 |
"A light container must be present to link the signals."
|
| 134 |
"'$(NUM)' must be a valid light number from the light container."
|
| 135 |
"'$(TAG_0)' requires that the tag '$(TAG_1)' be present."
|
| 136 |
"'$(TAG_0)' requires that the tag '$(TAG_1)' be present."
|
| 137 |
"Empty or invalid running number specified at character index $(INDEX)"
|
| 138 |
"Running number specified at character index $(INDEX) is too large, must be less than 9 characters."
|
| 139 |
"Invalid running number range specified at character index $(INDEX), ($(FROM)-$(TO))."
|
| 140 |
"Running number range '$(FROM)-$(TO)' specified at character index $(INDEX) overlaps already in use numbers, running numbers must be unique."
|
| 141 |
"Running number '$(NUMBER)' specified at character index $(INDEX) is already in use."
|
| 142 |
"Invalid character '$(CHAR)' specified in running number list, only numbers, ',' and '-' are supported."
|
| 143 |
"Possible running number list is too large, the set must contain less than 20000 possibilities."
|
| 144 |
"Category code 'ZX - Paintshed template' is obsolete."
|
| 145 |
"Category code 'ZX - Paintshed template' is obsolete."
|
| 146 |
"An asset must be specified for tag '$(TAG_NAME)'."
|
| 147 |
"The tag(s) $(MISPLACED_TAGS) can only be used when track-type = $(CORRECT_TRACK_TYPE). They will be ignored in this asset."
|
| 148 |
"The tag(s) $(MISPLACED_TAGS) can only be used when track-type = $(CORRECT_TRACK_TYPE). They will be ignored in this asset."
|
| 149 |
"The mesh(es) $(MISPLACED_MESHES) can only be used when track-type = $(CORRECT_TRACK_TYPE). They will be ignored in this asset."
|
| 150 |
"The mesh(es) $(MISPLACED_MESHES) can only be used when track-type = $(CORRECT_TRACK_TYPE). They will be ignored in this asset."
|
| 151 |
"The mesh(es) $(MISPLACED_MESHES) can only be used when track-type = $(CORRECT_TRACK_TYPE). They will be ignored in this asset."
|
| 152 |
"The tags $(MISSING_TAGS) are not all defined. The default values will be used and the positions of the elements may not fit your track."
|
| 153 |
"The mesh $(MESH) is present but the tag $(MISSING_TAG) is not defined."
|
| 154 |
"The mesh $(MESH) is present but the tag $(MISSING_TAG) is not defined."
|
| 155 |
"The mesh $(MESH) is present but the tags $(MISSING_TAGS) are not all defined."
|
| 156 |
"The tag $(MISSING_TAG) is not defined. The default value will be used and the positions of the elements may not fit your track."
|
| 157 |
"The mesh $(MESH) is present but the tag $(MISSING_TAG) is missing. The default value will be used and the positions of the elements may not fit your track."
|
| 158 |
"Unable to open .lm.txt file: $(FILE)"
|
| 159 |
"Unable to parse .lm.txt file: $(FILE)"
|
| 160 |
"No 'mesh' keys found in .lm.txt file: $(FILE)"
|
| 161 |
"$(LODCOUNT) LODs in .lm.txt file: $(FILE)"
|
| 162 |
"One of the LOD reductions of '$(FILE)' introduces a new attachment point: $(ATT)"
|
| 163 |
"Unable to parse .im file: $(FILE)"
|
| 164 |
"Invalid position data in .im file: $(FILE)"
|
| 165 |
"Texture '$(TEXTURE)' is missing or could not be loaded in mesh '$(FILE)', material '$(MATERIAL)'."
|
| 166 |
"$(COMBINEDCOUNT) combined chunks (of $(SOURCECOUNT) source) in .im file: $(FILE)"
|
| 167 |
"Source image texture file '$(TEXTUREFILE)' is too large for '$(ASSETFILE)' ($(WIDTH)x$(HEIGHT))"
|
| 168 |
"File '$(TEXTUREFILE)' is not a valid compiled texture file for '$(ASSETFILE)'"
|
| 169 |
"Compiled texture file '$(TEXTUREFILE)' is unsupported version for '$(ASSETFILE)'"
|
| 170 |
"Failed to open compiled texture '$(TEXTUREFILE)' for '$(ASSETFILE)'"
|
| 171 |
"Expected texture file type but found '$(TEXTUREFILE)' for '$(ASSETFILE)'"
|
| 172 |
"Script class does not match asset kind ($(KIND))."
|
| 173 |
"Material '$(MATERIAL)' in mesh '$(FILE)' is not of a recognised material type."
|
| 174 |
"MeshObjectSpec::LinkSpecs> Mesh-table element #$(MESH_INDEX) parent mesh is invalid."
|
| 175 |
"MeshObjectSpec::LinkSpecs> Mesh-table element #$(MESH_INDEX) is part of invalid hierarchy."
|
| 176 |
"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have a texture file extension."
|
| 177 |
"The kuid '$(KUID)' is not in the database, and could not be found in any known location. Ensure that this is a valid asset."
|
| 178 |
"The asset specified in '$(KUID)' is not installed locally but is available for download."
|
| 179 |
"The kuid '$(KUID)' specified in '$(TAG_NAME)' is not of the correct type."
|
| 180 |
"Integrity check failure on $(FILE). One or more route/session tiles may be missing."
|
| 181 |
"The tag '$(TAG_NAME)' requires a minimum asset version of $(MIN_VERSION)"
|
| 182 |
"Material '$(MATERIAL)' in mesh '$(FILE)' is missing a texture for a mandatory texture slot."
|
| 183 |
"FBX file is in an unsupported older format."
|
| 184 |
"KIND '$(KIND)' requires trainz-build $(TRAINZBUILD)."
|
| 185 |
"Material '$(MATERIAL)' in mesh '$(FILE)' has heightmap texture. Provide a normal map instead."
|
| 186 |
"Material '$(MATERIAL)' is shared between multiple chunks in this asset but the material parameters conflict."
|
| 187 |
"The value '$(VALUE)' in not a valid KUID."
|
| 188 |
"Custom render plugin failed to load mesh '$(FILE)'"
|
| 189 |
"Collision data exceeds $(LIMIT)KB. Please specify a different generation method or a simplified mesh."
|
| 190 |
"Tag '$(NAME)' is unable to be converted from $(TYPE1) to $(TYPE2)"
|
| 191 |
"Tag '$(NAME)' does not contain a valid integer: $(VALUE)"
|
| 192 |
"Tag '$(NAME)' does not contain a valid float list: $(VALUE)"
|
| 193 |
"Tag '$(NAME)' does not contain a valid float"
|
| 194 |
"Tag '$(NAME)' does not contain a valid kuid: $(VALUE)"
|
| 195 |
"Unable to parse chunk $(CHUNK_INDEX) in mesh file: $(FILE)"
|
| 196 |
"Failed to load bogey $(KUID)"
|
| 197 |
"Syntax error in script '$(SCRIPT)' for asset $(ASSET)"
|
| 198 |
"Session failed to load route asset: $(KUID)"
|
| 199 |
"Asset $(KUID) failed to load. Unloading resources."
|
| 200 |
"Unable to load mesh $(NAME) for $(ASSET_ID)"
|
| 201 |
"Traincar is missing required attachment point: $(ATT_NAME)"
|
| 202 |
"Parse error reading twinkles file: $(FILE)"
|
| 203 |
"Bad sequence order in $(TAG_NAME) list. Each element must be greater than the last."
|
| 204 |
"Invalid range in $(TAG_NAME) list. Elements must be greater than or equal to $(INC_MIN) and less than $(EXC_MAX)."
|
| 205 |
"Invalid element count in $(TAG_NAME) list. This list must have at least $(COUNT) elements (to match the $(TAG_START) list)."
|
| 206 |
"The season-selector references season '$(SEASON)', but this does not exist in the texture-variants container."
|
| 207 |
"Attached track asset $(CHILD) failed to load."
|
| 208 |
"Attached track asset not specified for track $(INDEX)."
|
| 209 |
"Asset is missing the required 'attached-track' container."
|
| 210 |
"Asset is missing the required 'track' tag."
|
| 211 |
"Asset is missing the required 'road' tag."
|
| 212 |
"Traincar asset must have at least two bogeys."
|
| 213 |
"Traincar asset has invalid bogey placement."
|
| 214 |
"Traincar asset has invalid length."
|
| 215 |
"Asset has an invalid number of LODs: $(LOD_COUNT)"
|
| 216 |
"Material $(MATERIAL) in mesh file $(MESH) has an inappropriate texture slot assigned: $(TEXTURE)"
|
| 217 |
"Material $(MATERIAL) in mesh file $(MESH) has no texture assigned to a required slot: $(TEXTURE)"
|
| 218 |
"Asset has duplicate attached track at track $(INDEX)."
|
