Revision as of 09:28, 6 March 2022

The information in this Wiki Page applies to TANE, TRS19 and Trainz Plus.

What Are Layers?

In Summary:
	Layers are a Surveyor tool that allows you to better manage the objects that are placed in your Trainz World.
	Layers are a Driver tool that allows you to change what the players see as they drive around your Trainz World.

Layers can contain any objects, visible and invisible, that can be placed into a layout using the Surveyor Object, Track and Train tools. The layers and their contents can be hidden from view or locked against alteration whenever required. Their main use is in the development of a Route and a Session but they can also be used as a way of providing some additional novelty during a Driver session.

Effect Layers Notes: The special ground effects layers, Clutter and TurfFX, that are available in the Topology Tools (press the  F1  key) are not discussed here. They are more like Textures than Layers but some aspects of their use and operations are similar to the layers covered here. These special ground effects layers are saved as part of a Route but are not associated with any Route Layer.

The Layers Tool

Click the Layers Tool to open up its properties.

Notes: The layers are organised into two groups:- Route Layers in the top group, and Session Layers in the lower group. Each group can contain multiple layers - the scroll bars next to the layer names shown on the left indicate that there are more layers in each group than can fit into the display window area.

Loading a Route and Loading a Session

In Summary:
	Route Layers are saved with the Route. Session Layers are saved with the Session.
	If you edit a Session Layer and later load just the Route then those edits will not appear.

More information on creating, loading and saving Routes and Sessions can be found on the Trainz Wiki Page at Route and Session Basics

The layers you see will depend on whether you have loaded a Route by itself (with no "child" Session) or a Session and its "parent" Route.

The first image on the left gives an example of the layers that can appear if a Route only is loaded into Surveyor. These are the layers that are saved with the Route. Note that a default "session-layer" is present. An empty default "session-layer" is always created in the Session Layers Group when only the Route is loaded into Surveyor. If you load just the Route and edit its "session-layer" then those edits will not appear the next time you load just the Route because an empty "session-layer" is created each time a Route is loaded without a Session. The second image on the left gives an example of the layers that can appear if a Session based on that Route is loaded into Surveyor. It shows Route Layers and Session Layers. In both cases, the Route Layers are identical because the same Route has been loaded. A Session contains its own layers, the Session Layers, that are loaded and saved with the Session but are not loaded or saved with the Route. If you load a Session and do not want to edit any of the Route layers then click the Lock Route Layers icon on the Layers Tool Click the Lock Button If you load a ROUTE but not the SESSION then only edit the Route Layers If you edit a SESSION or its layers then always save the Session When you save a new SESSION always give it a name, do NOT leave it as "Default"

Creating a New Route

Notes: When a brand new route is created it will come with two layers, a single route-layer and a single session-layer. Both layers will be empty (the baseboard with its grid is saved with the route but is not in any layer). A layer can be renamed at anytime by double clicking on its name with the left mouse button and typing a new name

The "Active Layer"

In Summary:
	The Active Layer is the selected (highlighted) layer.
	When you load the Route only into Surveyor, the first Route layer will be the Active Layer
	When you load a Session into Surveyor, the first Session layer will be the Active Layer

In the image above, the route-layer is the Active Layer. You can change the Active Layer at any time by clicking on the name of another layer.

Notes: The Active Layer is the "working layer" which is:- where new objects will be added to the layout the layer that is automatically selected for merging and deleting

Trainz does not identify which is the Active Layer in Surveyor and this often leads to problems such as objects being added to the wrong layer. See Adding Objects To Layers below for more information.

Adding a New Layer

Click the Add Button

An Add layer dialogue window will appear.

Steps: Enter a name for the new layer Select the layer group, Route or Session, where it will be placed Click the icon You can easily rename the layer or move it to the other layer group if you change your mind.

Deleting a Layer

Select the layer to be deleted and click the Delete Button. If you don't select a layer to delete then Trainz will select the current Active Layer.

Deleting a layer will delete ALL the objects placed in that layer except objects that are "Bound" to that layer. See The Bound Layer section below. In TRS19 (all versions) and Trainz Plus there will be a delay when deleting a layer. The delay will be indicated by a progress bar but can take several minutes on very large routes.  Resist any urge to click the Cancel button . This delay will occur every time a layer is deleted. Due to a "bug" deleting a layer that contains a ruler will not delete the ruler. It will be hidden from view but it may reappear if another layer with the same name as the deleted layer is created or it will, eventually, reappear in the route-layer.

If the layer being deleted is empty, then the following dialogue window will appear:-

Choices: Click Yes to delete the layer Click No to cancel the delete operation

If the layer being deleted is NOT empty, then the following dialogue window will appear:-

	Choices: Click Merge to merge this layer and its contents into another layer. See Merging Layers below for more information Click Delete to delete the layer and its contents Click Cancel to cancel the delete operation WARNING: Merge and Delete cannot be undone

Merging Layers

Select the layer to be merged into another layer and click the Merge Button. If you don't select a layer to merge then Trainz will select the current Active Layer.

In Summary:
	Merging a layer into another layer will move ALL the objects from the first layer into the second layer. The first layer, which is now empty, will then be deleted.
	Once layers have been merged they cannot be separated.

The layer merge dialogue window will appear as shown below:-

Steps: Select the destination layer for the merge Click the icon The Merge into: list shows all the available layers with no distinction between Route Layers and Session Layers In TRS19 (all versions) and Trainz Plus there will be a delay when merging a layer. The delay will be indicated by a progress bar but can take several minutes on very large routes.  Resist any urge to click the Cancel button . This delay will occur every time a layer is merged.

Locking Layers

It is good practice to LOCK ALL LAYERS that you are not currently editing. This will avoid the all too common problem of accidentally adding objects to the wrong layer.

If you LOCK or UNLOCK a Route Layer while editing a Session then you will have made a change to the Route and will be asked to save both the Route and the Session when you exit Surveyor.

Locking Individual Layers

To LOCK an individual layer, click on the Open Padlock icon next to its name. The layer being locked does not have to be the current Active Layer.

The objects in a LOCKED layer cannot be moved (around the layout) or deleted but they can be moved to other layers.

The first image on the left shows two Route Layers, both UNLOCKED with their Padlock icons Open. One layer, "Trees", is highlighted showing that it is the currently active layer. The second image on the left shows the same two layers after the "Trees" layer has been LOCKED. A locked layer can be UNLOCKED by clicking its Closed Padlock icon.

If you attempt to add a scenery object to a locked layer you will receive the following message:-

Click the icon to UNLOCK the layer

Locking ALL Route Layers

Click the Lock Button

This will LOCK ALL the layers in the Route Layers Group. The Session Layers Group will not be affected.

The Route Layers Group can be UNLOCKED by clicking the Lock Button again.

Moving a Layer

Main Points:
	Layers can be moved up or down within the same layer group (e.g. Route or Session) between the two groups
	A layer containing track objects (e.g. signals, switches, etc) CANNOT be placed above the layer containing the track

In TRS19 (all versions) and Trainz Plus there will be a delay when moving a layer. The delay will be indicated by a progress bar but can take several minutes on very large routes.  Resist any urge to click the Cancel button . This delay will occur every time a layer is moved.

In the example shown below a layer created in the Route Layers Group is being moved into the Session Layers Group.

Steps: Select the layer to be moved and hold down the left mouse button Drag the layer up or down to its new position The move can be between layer groups as shown left or within groups to move the layer to a higher or lower position in the group. The only situation where layer order within a layer group makes any difference is when adding track objects (e.g. signals, track signs, etc) to a track. When adding track objects to a track, the object being added must be in the same layer or in a layer below the layer containing the track. For more information, see the section The "route-layer" below. If you attempt to move a layer containing track objects, such as signals, to a position above the layer containing the track, you will get an error message.

Hiding Layers

To hide or show a layer click the Eye Icon next to its name.

	In the image shown left the two trees are in different Route Layers All the layers have their Eye Icons set to Show
	In the image shown left the Trees layer has its Eye Icon set to Hide If you attempt to add an object to a hidden layer you will receive a warning message. Layers that are hidden when saved in Surveyor will also be hidden when loaded in Driver.

Route Layers vs Session Layers

This topic has filled endless threads in the Trainz Forums with arguments raging on both sides.

In Summary:

In general, there are no "cast iron" rules that dictate what should be placed in the Route Layers Group and what should be placed in the Session Layers Group (for an exception see Trainz Plus and TRS19 Platinum Notes below). Each Route and Session will be different and different creators have different ways of working. The main question to be asked is how many different Sessions will be created using a particular Route?

Notes: For a Route with only a single Session - everything can safely go into the Route Layers Group Many creators only ever build a single Session for each of their Routes and do not use Session Layers at all (but they still have to save the session separately from the route). For a Route with multiple (2 or more) Sessions - certain things will probably need to go into the Session Layers Group for each Session. Many creators build multiple Sessions for each Route and rely on the Session Layers to create the differences between their Sessions. Many scenery assets actually have their properties stored in the Session, even when the assets themselves are in a Route layer. Editing the properties of these assets is considered to be a change to the Session. Unless you have a particular reason for saving the edited data (such as a change to commodities) you can usually ignore the offer to save the Session. These assets include:- junction switches - the left/right switch direction is stored in the Session industries - the commodities and quantities loaded/unloaded are stored in the Session (but the default direction is stored in the Route) industry enabled wagons - the commodities and quantities carried are stored in the Session consist locations (TRS19 Platinum Edition and Trainz Plus only) - this is stored in the Session (unless you need to save their new locations, you can safely ignore the offer to save the Session) named route objects (TRS19 Platinum Edition and Trainz Plus only) - while the name is stored in the Route, adding or changing the name is treated as a change to the Session

Trainz Plus and TRS19 Platinum Notes: The recommended practice in these versions of Trainz is to place all consists in a session layer and NOT in a route layer. Because these versions use a Unified Driver Surveyor, placing a train in a route layer after switching from Driver to Surveyor can cause problems. For example: If active Driver consists (i.e. those under manual or AI control) are in a route layer and you switch from Driver to Surveyor to edit the route and save the route edit, then those consists will be saved in their new positions, not their starting positions for the session. Recent experiments using the Unified Driver Surveyor have indicated that when portals produce trains they will be placed into the same layer as the portal - so if a train that is in a Session layer enters a portal that is in a Route layer and is later returned to the layout, it will be returned in the same Route layer as the portal. This has possibly always been the case with portals but has not been noticed until the arrival of the Unified Driver Surveyor For more details see the Trainz Wiki page How to Use the UDS Interface

The Route Layers Group

The Route Layer Group should be used for everything that will always appear in Driver Mode regardless of which Session is playing.

There is nothing stopping you from placing everything in the "route-layer" of the Route Layers Group and never having to worry about dealing with layers ever again - some creators prefer to work this way. However, layers do provide you with a way of organising your scenery objects to make them more manageable, particularly in more complicated layouts. Some examples:-

• A Special Objects layer or layers that can be used to hold certain scenery objects. For example all the trees or a particular building. This can be very useful when you need to hide those objects to locate or place other objects. Trackside cameras in particular can be very difficult to find when placed in a forest.
• A Platform Objects layer can be used to hold all platform items such as seats, luggage, luggage trolleys, people, lamp posts, etc. Because these items are placed on top of a platform object they can be very difficult to move or delete without first moving the platform. The layer containing the platform can be locked allowing these objects to be easily moved or deleted.
• Hiding and Showing Objects in Driver Mode. There is a Session Rule and a Driver Command that can hide and show layers during the running of a Session. For example: a rail worker can be placed in a separate layer and positioned next to a track lever while shunting operations are underway but can be removed from the scene by hiding that layer when shunting has been completed.
• A Test Layer for experimenting. Not sure if a particular object is right for your layout? Place it in a temporary layer which you can hide and show to see any differences it makes. This is particularly useful if you are deciding between different types of grasses, for example, placed throughout the layout. If the objects prove to be unsuitable then they can all be deleted by deleting the layer. If they are suitable then the layer can be merged with another or left as a new layer.
• A Ruler Layer if you are using rulers. Although rulers obey layer behavior (lock and hide) just like all other objects and splines, they have no properties window to show their layer or allow you to change that layer. Consider placing all rulers in a dedicated layer to make their management easier.  NOTE:  Due to a bug in TANE/TRS19, deleting a dedicated Ruler Layer will not delete the rulers but will temporarily hide them from view. Rulers will still have to be deleted individually.

It is a good idea to place ALL the consists in the same layer particularly if they are going to be coupled together during the running of a Session. A very useful development tool is the Bound Layer. See The Bound Layer section below.

The "route-layer"

To avoid any confusion over which layer is the original "route-layer", this is one layer that should not be renamed or moved from the top position.

While all layers are equal, the "route-layer" is special.

Track objects, such as signals, junctions and track signs, cannot be placed in any layer that is above the layer containing the track that they are attached to. If the route-layer is used for all the track and track objects and this layer is left as the top layer then this will never be a problem.

It is recommended that the following objects should be placed in the route-layer:- Track and interactive industries with track Track infrastructure (turntables, bridges, tunnels, etc) Signals and track signs (speed limits, warnings, distance, etc) Junctions and switches ..and that the "route-layer" be placed at the top of the Route Layers Group.

The Session Layers Group

The Session Layers Group should be used for everything that will only be seen in the currently loaded Session.

If you are creating more than one Session based around a particular Route, then you will probably make use of the Session Layers.

Notes: Session Layers can contain:- Scenery objects that will only appear in one or some of the Sessions. For example: If you have placed human figures and equipment for a track work crew alongside the track and want them to be seen in a daylight Session but not in a night Session, then place them in one of the Session Layers of the daylight Session only. Likewise, station staff holding lamps would be placed in one of the Session Layers of the night Session only. Consists used in a Session.

It is a good idea to place ALL the consists in the same Session Layer and using a Session Layer for ALL consists is the recommended method for Trainz Plus. Particularly if they are going to be coupled together during the running of a Session. When you first save a Session, give it a distinctive and informative name. Avoid the temptation to use Default as the name of your Session as you can easily end up with several Sessions under the same Route all called Default.

Adding Objects To Layers

When an object (such as a scenery item, consist, track or track object) is added to the layout it is automatically placed in the currently Active Layer. Unfortunately, Trainz does not indicate which layer is the Active Layer unless you open the Layers Tool to look. This can lead to objects being placed into the wrong layers and while these objects can later be moved to another layer (see the section Moving Objects To Other Layers below) it would be better to correctly set the Active Layer first.

It is good practice to LOCK ALL LAYERS that you are not currently editing. This will avoid the all too common problem of accidentally adding objects to the wrong layer.

You cannot add objects to a layer that is LOCKED.

If you attempt to add a scenery object to a locked layer you will receive the following message:-

Click the icon to UNLOCK the layer.

When adding track objects (signals, speed signs, etc) to a track, the objects being added must be in the same layer as the track or in a layer below the track layer. For more information, see the section The "route-layer" above.

Notes: There are many features of Trainz Routes and Sessions that are NOT stored in layers. In some cases while the objects themselves may be placed in layers, their settings or properties are not. These include:- landforms textures TurfFX and Clutter ground effects trackside camera settings weather conditions time of day session rules and driver commands signal and junctions settings rolling stock loads industry settings portal settings passenger station settings navigation points interlocking tower settings ^ Landforms, textures, TurfFX, Clutter and trackside cameras are saved as part of the Route while all the others are saved as part of a Session. ^ A bug has been reported in the Interlocking Towers (and the Enhanced Interlocking Towers) where the path and settings are initially saved in the Route but any later edits and changes are then saved in the Session. The workaround for this is to always load the Session when working with ITs and EITs. This problem has still not been fixed in TRS19 SP2.

Deleting Objects From Layers

It is good practice to LOCK ALL LAYERS that you are not currently editing. This will avoid the all too common problem of accidentally deleting objects from the wrong layer. An exception to this "good practice" is when managing rulers. Unless you have used a dedicated ruler layer for all rulers it can be difficult to discover which layer contains a particular ruler. If rulers are not added to a dedicated layer then you will need to unlock and unhide all the layers first before you can use the Delete Ruler tool.

You cannot delete objects from a layer that is LOCKED.

Unfortunately Trainz does not give you a warning message when you attempt to delete an object from a locked layer, the object just refuses to be deleted.

If you cannot delete an object then check:- that the objects layer and bound layer (if set) are unlocked that you are using the correct delete tool (e.g. such as attempting to delete a tree with the spline, signal or rolling stock delete tool) - it happens!

Moving Objects To Other Layers

Steps: To move individual objects from one layer to another:- Open the Properties window (? button in the Object Tools) of the object to be moved Click the Layer or one of the scroll buttons Select the new layer Click the icon You can move an object into and out of a locked layer Multiple scenery objects can be moved to another layer by using the Bulk Asset Update/Replacement tool from the Surveyor Main Menu Rulers cannot be moved to a different layer because they do not have a properties window. If it is necessary to move a ruler to another layer, it must be manually created in the desired layer (using the Add Ruler tool), then the pre-existing ruler must be deleted (using the Delete Ruler tool).

The Bound Layer

This is a little used and probably little understood layer feature. It allows you to attach an object to two different layers so it can have the properties (locked/unlocked and show/hide) of both layers. The bound layer was introduced as a development tool, its sole use is as a tool in the building of routes and sessions.

	An object will be LOCKED and cannot be deleted or moved if its layer OR its bound layer is locked.
	An object will be HIDDEN if its layer OR its bound layer is hidden.
	Rulers cannot be bound to another layer.

Some applications:-

• Temporarily locking an object by binding it to a locked layer while allowing other objects in the same unlocked layer to be moved or deleted. A simple but very effective development technique is to create a Route layer called "Locked" and then lock it. If you need to temporarily stop an object from being deleted or moved then it can be bound to the "Locked" layer.
• Temporarily hiding an object by binding it to a hidden layer (this will require the hidden layer to be made visible so the object can be unbound).

Steps: In the Properties Window of an object:- Click the Bound Layer box or one of its scroll buttons Select the layer to be used as the Bound Layer for the object (an object cannot be bound to its own layer) The effects of the binding can be reversed by setting the Bound Layer back to <none>.

When a layer is deleted any objects bound to that layer will have their Bound Layer reset to <none>

If you are going to be working with multiple objects that will be bound to a locked or hidden layer then a simple strategy is to:- Create a new empty layer called "Locked" or "Hidden" and lock or hide that layer, according to your needs Bind the individual objects to that layer as required When editing, testing or whatever you are doing has been completed simply delete the new layer. All objects that have been bound to that layer will have their Bound Layer property reset to none so the hidden objects will reappear and the locked objects will be unlocked.

If you need to remove an object from a route but cannot alter the route (e.g. it is payware or under another users kuid) then create a new hidden session layer and change the bound layer of the object to the hidden layer. This will be treated as a change to the session only and Trainz will not ask you to save the route as well as the session.

Layers in Driver Mode

During the running of a Session in Driver Mode visible layers can be hidden and invisible layers revealled according to the events that occur during the Session.

The two Driver Mode scenes shown on the left illustrate this feature. In the first image on the left, all layers are visible In the second image on the left, two of the layers have been hidden The trigger for this change was the arrival of a train at the platform.

This effect could be achieved in two different ways:-

1. A Driver Command - specific to a particular driver, or
2. A Session Rule - specific to a particular driver, consist, or any driver/consist
   

Using a Driver Command

The driver command Layer Control hides and shows named layers.

Using Session Rules

Rules Used:

• Trackside Check Rule - to trigger the event
• Show/Hide Layer Rule - to hide layers
• Message Popup Rule - to open a browser window with a message

Session Editor Screenshot:

Description:

In this example:-

• The Trackside Check Rule is triggered when a specific train comes to a stop at a trackmark. This then executes the following rules in order:-
  • The Show/Hide Layer Rule is used to hide the layer named "People". Four passengers (three standing and one seated) are hidden.
  • The Show/Hide Layer Rule is used to hide the layer named "CNJCartsFull". The boxes and mail bags on the three platform trolleys are hidden.
  • The Message Popup Rule is used to place a message on the screen informing the player that the passengers and mail have been loaded.

Trainz Wiki

More Tutorials and Guides to Using Trainz How to Guides Driver Commands List Session Rules List (Alphabetical) with Parameters Session Rules List (Categories) With Parameters

This page was created by Trainz user pware in June 2018 and was last updated as shown below.