Latest revision as of 08:02, 17 March 2024

The information in this Wiki Page applies to TANE, TRS19, Trainz Plus and TRS22. A video tutorial specific to setting the environmental controls can be found at TRS19 Environment and Lighting Tutorial

The Environmental Tools give you access to settings that control the season of the year, basic weather conditions, lighting, geographic location, etc

The Environment Tools are used to set:-

	the skybox - to configure the cloud cover
	the weather - from rain to snow to clear. Weather can also be set from the Main Menu - Settings options and by using Session rules
	the wind speed - which will only affect the swaying motion of Speedtrees
	the snowline - the minimum snow altitude for assets that have a snow effect layer. Used with the world origin altitude setting
	the date - for assets that have different seasonal options. Used with the world origin to set the season of the year
	the lighting - the light levels and colours through a 24 hour period
	the water colour and water surface effects (smooth, rough, etc) for Legacy Water only
	the road traffic - enabled/disabled
	the world origin - geographic coordinates (used with the date to set the season of the year) and altitude (used with the snowline to set snow effects)

To set the Session Start Time use the

Startup Options Rule or the

Time and Rate Rule in the

Session Editor

Notes:

There is no Save or OK button on the Environment Tools Window. As soon as you enter or select a setting it will be set. When finished editing simply Left Click the window Off button BUT make sure you SAVE before exiting Trainz

Seasons (for those assets that show seasons - e.g. snow, leaf colours, etc) are controlled by the

Date,

Snow Altitude (for snow effects) and

Location (World Origin) settings

The dates at which the seasons change in Trainz are:-

	March 1st - Southern Hemisphere Fall (Autumn), Northern Hemisphere Spring
	July 1st - Southern Hemisphere Winter, Northern Hemisphere Summer
	October 1st - Southern Hemisphere Spring, Northern Hemisphere Fall (Autumn)
	December 1st - Southern Hemisphere Summer, Northern Hemisphere Winter

[edit] Loading and Saving Environmental Settings

	A newly created Route will have its environmental settings set to their default values
	A newly created Session will have its environmental settings set to those of the Route
	Where the Route and Session have different saved environmental settings, those in the Session will be used

In Routes

	When you create a new route, or load an existing one with NO saved Environmental settings, then all those settings will be set to their default values
	If you change any of the nvironmental settings of a route then you must also edit the route (e.g. move a route asset) and save it for those settings to become part of the route

In Sessions

	When you create a new session, or load an existing one with NO saved Environmental settings, then the session will use the settings that are part of the route which will be the default settings if none have been set for the route
	When you load an existing session with saved Environmental settings, then those settings will take priority over the same settings that have been saved in the route
	If you change any of the Environmental settings of a session then you must also edit the session (e.g. move a session asset or change a session property) and save it for those settings to become part of the session

Because a Session can have its own environmental settings you are able to create Sessions set in different conditions - some examples:-

	separate summer and winter sessions or for any season - see the Set Date and Set World Origin sections below
	a session set in an early morning winter fog - see the Fog Control section below
	spring rain shower and cool overcast autumn (fall) sessions - see the Set the Weather and Set the Sky sections below

[edit] The Environment Tool

Open the Environment Tools Editor from the Surveyor Main Menu in TANE as shown below left or from the Surveyor Edit Menu in TRS19 and later versions as shown below right.

In all versions select the option Edit Environment...

This will open the Environment Properties Window as shown below.

	Notes:
	The Clock Dial shown in this tool does NOT set the game time. It sets the times at which lighting conditions change
	To set the Session Start Time use the Startup Options Rule or the Time and Rate Rule in the Session Editor

TRS19 and later Trainz versions have an additional control that adjusts the lighting level, as shown below

[edit] Lighting

The Lighting Tools control the ambient, sun and water colours. This tool tab is opened by default whenever the Environment Editor is opened

[edit] Light and Time

The dial shown is a 24 hour clock that sets the lighting conditions at selected times of the day and night

[edit] The Diurnal Cycle

Steps: To see the full 24hr cycle:-
	Left Click on the Diurnal Cycle button to set the clock running through the full 24 hour cycle in just 30 seconds
	Left Click on it again to stop the cycle

The scene shown in Surveyor will display the lighting conditions that correspond to the time on the clock as the hand sweeps around.

[edit] Selecting a Time

Steps: To set a specific time:-
	Left Click and Drag the clock pointer arm to the required position on the clock dial

	Notes:
	The clock dial does NOT set the starting time for a session
	To set the Session Start Time use the Startup Options Rule or the Time and Rate Rule in the Session Editor
	In Trainz Plus and TRS22 the Session Time can be set "on the fly" in Driver from the Session Options Window. But the time setting is approximate, it is not exact

[edit] Setting the Lighting Conditions

[edit] Colour Control Points

The ring around the dial contains a number of green dots.

	Each dot is a Control Point that sets the specific Red, Green and Blue colour values, and other lighting features, at the time shown on the clock
	Each of the RGB colour value can be altered by dragging its needle point to a new position around the dial

Steps: To see the settings for a particular time control point:-
	Left Click on one of the green points around the ring. The clock dial will immediately point to the selected dot and time

The control point will be highlighted and the RGB Wheels will display the Red Green and Blue values that have been set at that point

Steps: To alter the colour settings for a particular time control point:-

select an RGB colour wheel and either:-

	Left Click on the required value spot on its colour dial, OR
	Left Click and Drag the pointer to the new value on its colour dial

To set all 3 colour wheels to the same value hold the down Shift key while performing option

or

above

[edit] Types of Lighting

	Notes:
Each control point stores the RGB values for three different types of lighting in the scene.
	The Ambient Colour which is the directional lighting and mostly affects the hue of buildings and other scenery objects
	The Sun Colour which affects the colour of the sunlight and mostly affects the hue of the terrain
	The Water Colour (for Trainz versions before TRS19 SP4) which affects the colours reflected by water surfaces

The 3 boxes below the colour wheels and next to the Sky box show the colour effects created for each type of lighting at the selected time.

[edit] Ambient Colour

Steps: To set the Ambient Color:-

Left Click on the control point for the time that you want to edit

Left Click on the top box of the three. This is the Ambient Colour.
The 3 dials will show the RGB values for the Ambient Colour at the selected time and the Ambient color preview box will show the colour produced by the RGB settings

You can then change the RGB settings for the Ambient Colour by either:-

	Left Click and Drag the pointers to new positions on the coloured rims of each dial, OR
	Left Click on a new position on the coloured rims of each dial

[edit] Sun Colour

Steps: To set the Sun Colour:-

Left Click on the control point for the time that you want to edit

Left Click on the middle box of the three. This is the Sun Colour.
The 3 dials will show the RGB values for the Sun Colour at the selected time and the Sun color preview box will show the colour produced by the RGB settings

You can then change the RGB settings for the Sun Colour by either:-

	Left Click and Drag the pointers to new positions on the coloured rims of each dial, OR
	Left Click on a new position on the coloured rims of each dial

[edit] Water Colour

This Water Colour control only affects the colour of the water created using the Add Water tools (for Classic or Legacy Water) in the Topology menu (the F1 key in Surveyor Classic). It has no effect on the colour of water created as Water Layers used in TRS19 SP4 and later versions.

Water Colour values set for one control point become the values for ALL the control points

Steps: To set the Water Colour for "legacy water" only:-

Left Click on any control point

Left Click on the bottom box of the three. This is the Water Colour.
The 3 dials will show the RGB values for the Water Colour at the selected time and the Water color preview box will show the colour produced by the RGB settings

You can then change the RGB settings for the Water Colour by either:-

	Left Click and Drag the pointers to new positions on the coloured rims of each dial, OR
	Left Click on a new position on the coloured rims of each dial

[edit] Water Effect Layer

In TRS19 SP4 and later a new method of adding water to a route was introduced - as an Effect Layer. The original method, now called Legacy Water, can still be used in a route but it is NOT recommended that both water methods (Legacy and Effect Layer) are used in the same route.

TRS19 SP4
The water colour for the Water Effect Layer is set by altering the colour for the Top Skybox.

Steps: To set the Water Colour in TRS19 SP4:-
	select a time control point for a specific time of day
	Left Click in the top region of the Skybox - a while line or bar will appear across the region
	Set the RGB color wheels for the Top Skybox region for the selected time
	Repeat for each time control point as required (the Water Effect Layer can have its colour changed at different times of the day/night)

See The Skybox below for more details.

Trainz Plus and TRS22

The major changes to water introduced in these versions are:-
	multiple water layers can be added to a route
	each water layer has its own colour controls built into its properties (i.e. the colours are not part of the Skybox)
	Legacy Water is NOT compatible with the Water Effect Layers in Trainz Plus and TRS22

[edit] Mixing Colours

Notes:

Getting the "right colours" can be more of an art than a science. To set the exact colour you want means mixing the correct quantities of Red, Green and Blue. Each of these colours has 256 different values from 0 to 255 that, when combined, produce over 16 million different possible colours - but many monitors and most eyeballs will not be able to tell the differences between many of those 16 million colours.

Setting all three colours to the same values will produce monotones from Black to White with 254 different shades of gray between those two tones.

You can quickly set all three dials to the exact same value by a Shift Left Click on a dial position on any one of the three dials.

Note that in the examples below, the "tyre" around each dial shows the exact quantity of colour that is being added.

R = 0; G = 0; B = 0	R = 128; G = 128; B = 128	R = 255; G = 255; B = 255

Black	50% Gray	White
All other colours are made by mixing different quantities of the three colours.

Example 1: Setting Grey Scale Values for the Ambient and Sun Colours

This is an example only

Setting both the Ambient and Sun colours to different shades of grey, as shown in the example below, can solve many brightness issues.

Time	06:00	07:00	10:00	12:00	18:00
Ambient Sun

RGB values (all 3 RGB dials set equally)
Ambient	128	192	224	255	128
Sun	160	192	224	224	192

Brightness (TRS19/Trainz Plus/TRS22)	40%	50%	50%	50%	40%

Example 2: Setting a Water Colour

For Legacy Water only:-
Creating a colour suitable for water (RGB values are approximate)

	Starting with pure Blue R = 0; G = 0; B = 255
	Add pure Green to make the colour Cyan R = 0; G = 255; B = 255
	Scale back (darken) the Green R = 0; G = 155; B = 255
	Scale back a bit more R = 0; G = 128; B = 255
	Add some Red R = 75; G = 128; B = 255

[edit] Shadows

The tone of shadows cast by objects is controlled by the combined effects of the Ambient Color and the Sun Color settings

These settings are examples only
Initial settings for the Ambient and Sun colours are shown in the image below with the resulting shadow effects. Lighting conditions are set for mid to late afternoon

Shadows and lighting are "normal" for the time shown

Ambient colours set to 0. Sun colours unchanged

The overall lighting is noticeably darker. Shadows are black

Ambient colours set to Maximum. Sun colours unchanged

The overall lighting is noticeably lighter. Shadows are lighter

Ambient colours unchanged. Sun colours set to 0

Scene is evenly lit but much darker. No shadows. A heavily overcast late afternoon?

Ambient settings unchanged. Sun settings set to Maximum

Scene lighting is noticeably brighter. Shadows are darker but not black. A summer afternoon?

Moving the Ambient and Sun colour controls to values between 0 and Maximum will alter the results. Experimentation is a good idea.

[edit] Lighting Level Control

TRS19 and later Trainz versions have an additional control that is placed next to the Ambient, Sun and Water colour boxes. This sets the overall brightness or lighting level for each control point.

Steps: To set the brightness level:-

select a time control point for a specific time of day

move the brightness slider to:-

	the BOTTOM to give maximum brightness level
	the TOP to give minimum brightness level
	a point in between these two positions for an intermediate lighting level

Repeat for each time control point as required.

[edit] Resetting the Lighting Conditions

All the lighting colour settings can be reset back to the Trainz default colours.

Steps: To reset ALL the lighting conditions to their default values:-

Left Click on the Color Reset button, then either:-

	Left Click on the icon to accept the reset, OR
	Left Click on the icon to reject the reset

[edit] Adding a New Control Point

New control points can be added to the clock dial

Steps: To add a new time control point:-
	Left Click on the Add button
	Left Click on the ring at the place where the new control point is to be located

	Notes:
	the Add button will remain active (selected) until it is deactivated so each Left Click can add another control point.
	The button can be deactivated by a Left Click on it again or by selecting another button.

Notes:

During the running of a Session the lighting will "morph" or "transform" at a steady rate from the set of colour values at one control point to the set of colour values at the next control point. Left Click on the Diurnal Cycle button for a demonstration.

	If the control points are far apart then the transition will be gradual
	If the control points are close together then the transition will be faster
	If there are several control points grouped closely together then the transitions can be more dramatic

The places where you would need faster dramatic transitions would be at dawn (around 06:00) and dusk (around 18:00)

[edit] Deleting a Control Point

Existing control points can be deleted

Steps: To delete an existing time control point:-
	Left Click on the Delete button
	Left Click on the control point to be deleted

	Notes:
	the Delete button will remain active (selected) until it is deactivated so each Left Click can delete another control point.
	The button can be deactivated by a Left Click on it again or by selecting another button.

[edit] Moving a Control point

Existing control points can be moved

Steps: To move a control point:-

Left Click on the Move button

Left Click on the control point to be moved and either:-

	Left Click and Drag the point to its new position around the ring, OR
	Left Click on the ring at the spot where the point is to be placed

	Notes:
	the Move button will remain active (selected) until it is deactivated so each Left Click and Drag can move another control point.
	The button can be deactivated by a Left Click on it again or by selecting another button.

[edit] The Skybox

The Skybox sets the sky colours in three different regions of the sky at the selected time of day, as shown in the extreme example below

Each control point also stores the Skybox settings for that particular time

Steps: To set the Skybox colours:-
	Select a control point for a specific time of day
	Left Click in a region of the Skybox (top, middle, bottom) - a while line or bar will appear across the selected region
	Set the RGB color wheels for the selected region
Repeat for the other two regions and for other times of the day/night as needed

In the areas between the three regions the colours will be blended to create a smooth transition.

The Top Skybox region will set the colour for the Water Effect Layer in TRS19 SP4.
In Trainz Plus and TRS22 each Water Effect Layer (there can be more than one) has its water colour built into the layer properties - for more information see

Edit Effect Layers.

Do you need an Overcast Sky for your scene?

Steps: To create an overcast sky:-
	for each daylight control point set each Skybox region (top, middle, bottom) to shades of gray (see Mixing Colours above).
	in the Environment Tab (see below), set the Sky Type to No Cloud 01

Note: This will not remove or hide the sun.

[edit] Fog Control

This controls the level of "fog" in the scene

Settings:

	Select a control point for a specific time of day
	Move the slider to the required position
Repeat for other times of the day/night as needed

Note:

Each control point also stores the Fog setting for that particular time

Increasing the fog level can also increase the brightness level (real fog does scatter light causing the background to appear brighter). In TANE you may need to reduce the RGB levels to compensate. In TRS19/Trainz Plus/TRS22 you can reduce the Brightness level to compensate.

[edit] Location

The Location Tools control the geographic and date (season) data for the Route and Session. Left Click on the Location tab icon to open the Location Tool Controls

[edit] Set the Date

The top section is a standard calendar selection tool that allows you to set the month and the day of the month. The only effect this has in Trainz is to set, with the geographic coordinates, the season of the year.


	Settings: Set the Month by scrolling left or right through the 12 month calendar Set the Day (if required) by a Left Click on the date in the selected month

You can also set a date by typing it directly in the text entry box above the calender

	The entered date can be saved in the Route, the Session or both depending on whether you are editing the Route or the Session or both
	You must make a change to an object in a Route Layer or a Session Layer for the date change to be recorded as part of the Route or the Session (or both)

Sick of it always being winter in your Session during winter? Want it to always be summer instead?

Set the date to a Summer month. This will be saved when you edit and save the Session - BUT make sure that you have set the World Origin to the correct hemiphere.

Notes:

It is possible to set a date to a particular Year but this will have no effect on the operation of the Route or Session. Essentially only the Month is important.

Setting the year to 1900, for example, will not recreate an early 20th Century railroad. Time periods have to be recreated by carefully selecting scenery and rolling stock assets that belong to that particular time period.

To Set The Route Date:

	Load a Route into Surveyor
	Change the date
	Edit the Route (e.g. edit a Route Layer object or the terrain)
	Save the Route

To Set The Session Date:

	Load a Session into Surveyor
	Change the date
	Edit the Session (e.g. edit a Session Layer object, a commodity item or Session Rule)
	Save the Session

To Set Both The Route and Session Dates:

	Load a Session into Surveyor
	Change the date
	Edit both the Route and the Session
	Save both the Route and the Session

Notes:

There is an order of priority with dates in Routes and Sessions

	If the Route and the Session are saved with different dates, then the Session date will decide the visible season.
	If a Session does not have a saved date, then the Route date will decide the visible season.
	If no date has been saved in the Route and the Session, then today's date will decide the visible season.
This order of priority also applies to all Environmental Settings except the World Origin which only applies to a Route.

In Trainz Plus and TRS22 the Month and therefore, the Season of the Year can be set "on the fly" in Driver from the

Session Options Window. The North/South Hemisphere must also be correctly set in the World Origin or Region

[edit] Set World Origin

The middle section is the World Origin Tool and sets the geographic location, including the altitude, of the route using a World Origin marker that is only visible in Surveyor.

	Setting the World Origin does NOT set regional features such as which side of the road the cars drive on. Use the Route Editor - Region setting for that
	The World Origin is always part of a Route, not part of a Session

Steps: To set the World Origin:-
	Move the Surveyor view to the location where you want the origin marker to be placed
	Left Click on the Add world origin button
	Left Click the selected location in the layout to place the marker
Another Left Click will simply move the marker, it will not add a new one

The World Origin marker

Once it has been placed, the marker can be moved by a Left Click and Drag or a Left Click. After adding the marker it should be edited to add geographic data.

Left Click on the Go to world origin icon to move the Surveyor screen so that it is centred on the World Origin marker.

Left Click on the Edit world origin icon to set or edit the World Origin data. See Editing the World Origin below.

[edit] Editing the World Origin

The Reset button sets ALL values to their defaults

Left Click on the

icon to accept the entered data

Left Click on the

icon to reject the entered data

Enter the geographic data for the world origin

	Latitude and Longitude in degrees and minutes (with seconds added as the decimal fraction of the minutes - 10'30" would be entered as 10.50)
	Hemispheres - N/S (North/South) and E/W (East/West). The North/South setting along with the Date will set the season of the year
	Altitude in metres. This, with the Snowline setting, will affect the appearance of assets that have a built in snow effect

	Notes:
	The Latitude determines the sun angle and, with the Date, the season of the year
	Setting a high latitude value North or South will NOT change the times of sunrise or sunset. They are fixed at 06:00 and 18:00

[edit] Deleting the World Origin

There is no delete button for the World Origin marker, but you can still delete it

In Surveyor 1.0 (Classic)

Steps: To delete the world origin:-

	open the Objects Tool flyout (press the F3 key)
	select the Delete tool
	Left Click on the World Origin marker

In Surveyor 2.0

Steps: To delete the world origin:-

	select the Free Move Tool (press the S key) or the Fine Adjustment Tool (press the D key)
	Left Click on the World Origin marker
	press the Delete key

	Notes:
	All routes MUST have a World Origin
	If you delete the World Origin marker then it will be hidden and will take the default coordinates of latitude 52.45 N, longitude 13.3 E, altitude 0 metres - which places it in Berlin

[edit] Traffic Control

This tool simply turns the road traffic ON and OFF

Notes:

This road traffic tool:-

	only works on roads that have been designed to use road traffic (not all roads support traffic)
	does not set the road traffic characteristics - the number and types of vehicles, which side of the road is used. These features are set in the Route Editor - Region by assigning a Region to the route. Details on how to create and assign a Region asset can be found in the Create a Region Asset Wiki page


	Settings: Left Click on the car icon to enable and disable traffic

[edit] Weather and Water

	The Weather and Water Tools control the weather (sky, weather type, wind, snow) and water surface data for the Route and Session. Left Click on the Weather and Water tab icon to open the Weather and Water Tool Controls
	To set the Water Colour, refer to the Setting the Lighting Conditions section above

[edit] Set the Sky

This sets the basic sky and cloud characteristics


	Settings: Left Click on the Sky Title (Cloud Cover) to select from a drop down list of sky types, OR Scroll through the list by using the Scroll icons

The box below the sky title will give a preview of the selected sky.

[edit] Set the Weather

This sets some very basic weather conditions. The set conditions will be constant throughout the running of a Session.


	Settings: Move the slider to set the weather between Rain and Snow

	Notes:
	There are Session Rules that also control the weather, including changeable weather conditions. Check the Trainz Wiki Session Rules list at Session Rules - Weather
	In Trainz Plus and TRS22 the Weather can be set "on the fly" in Driver from the Session Options Window

Trainz Plus/TRS22 Platinum Driver Weather Controls

In Trainz Plus and TRS22 when in Driver mode open the Window Menu and Session Options and you will have access to Weather Controls to change the weather "on-the-fly".

Weather

this drop down list will show all the different weather conditions from Clear to Heavy Snow. Left Click on the required setting

Weather Changeability

this drop down list will set the rate and range of the weather changeability. Left Click on None, Periodic or Extreme

[edit] Wind Strength

This setting only effects SpeedTrees


	Settings: Move the slider to set the wind strength between zero (left) and maximum (right)

[edit] Set the Water Surface

This sets the water surface effects for Legacy Water only. It does not apply to Water Effect Layers


	Settings: Left Click on the Water Surface to select from a drop down list of surface effects, OR Scroll through the list by using the Scroll icons

[edit] Set the Snow Altitude

This sets the altitude at which objects built with snow effects will display snow in winter. It has no effect on objects created without this feature


	Settings: Enter the minimum altitude, in metres, at which snow can appear.

	Notes:
	The snow effects will only appear in winter if the altitude of the terrain is at or above the Snow Altitude‡
	Only those assets that were created with snow effects will be affected by this setting
‡ a few assets may display snow even if they are placed below the set Snow Altitude. This is usually the result of an error by the asset creator.

[edit] Trainz Wiki

More Tutorials and Guides to Using Trainz

This page was created by Trainz user pware in July 2018 and was last updated as shown below.

@@ Line 1: / Line 1: @@
+<table width=1000>
+<tr valign="top">
+<td>The information in this Wiki Page applies to '''TANE''', '''TRS19''', '''Trainz Plus''' and '''TRS22'''. A video tutorial specific to setting the environmental controls can be found at '''[https://n3vgames.typeform.com/to/y4J2Rl TRS19 Environment and Lighting Tutorial]'''</td>
+</tr>
+</table>
+<br>
 <table width=1000>						<!-- BEGIN Nav Buttons Table NO SKIPS -->
 <tr valign="top">
@@ Line 10: / Line 16: @@
 </tr>
 </table>								<!-- END Nav Buttons Table -->
-<table width=1000>
-<tr valign="top">
-<td>The information in this Wiki Page applies to '''TANE''', '''TRS19''', '''Trainz Plus''' and '''TRS22'''. A video tutorial specific to setting the environmental controls in '''TRS19''', '''Trainz Plus''' and '''TRS22''' can be found at '''[https://n3vgames.typeform.com/to/y4J2Rl TRS19 Environment and Lighting Tutorial]'''</td>
-</tr>
-</table>
-<br>
 <table>
 <tr valign="top">
@@ Line 25: / Line 26: @@
 <tr valign="top">
 <td width=10>[[image:BlueDot10x10.png|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">In Summary:</span></td>
+<td>The '''Environmental Tools''' give you access to settings that control the season of the year, basic weather conditions, lighting, geographic location, etc</td>
 </tr>
+</table>
+<br>
+<table width=700 bgcolor=#000000 cellpadding=2>
 <tr valign="top">
-<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>
-<td>The Environment Tools are used to set:-
+<table width=696 bgcolor=#ffffff cellpadding=2>
-*the '''skybox''' - to configure the cloud cover
+<tr valign="top">
-*the '''weather''' - from rain to snow to clear. Weather can also be set from the '''Main Menu - Settings''' options and by using Session rules
+<td>The '''Environment Tools''' are used to set:-
-*the '''wind speed''' - which will affect the swaying motion of Speedtrees
+<table>
-*the '''snowline''' - the minimum snow altitude for assets that have a snow effect layer. Used with '''world origin''' altitude setting
+<tr valign="top">
-*the '''date''' - for assets that have different seasonal options. Used with '''world origin''' to set the season of the year
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
-*the '''lighting''' -  the light levels and colours through a 24 hour period
+<td>the '''skybox''' - to configure the cloud cover</td>
-*the '''water colour''' and '''water surface''' effects (smooth, rough, etc)
-*the '''road traffic''' - enabled/disabled
-*the '''world origin''' - geographic coordinates (used with '''date''' to set the season of the year) and altitude (used with '''snowline''' to set snow effects)
-</td>
 </tr>
 <tr valign="top">
-<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>The '''Time of Day''' is set using Session rules such as [[image:WikiLink.PNG|link=]] '''[[Session_Rule_List_with_Parameters#Startup_Options_Rule|Startup Option Rule]]''' and [[image:WikiLink.PNG|link=]] '''[[Session_Rule_List_with_Parameters#Time_and_Rate_Rule|Time and Rate Rule]]'''</td>
+<td>the '''weather''' - from rain to snow to clear. Weather can also be set from the '''Main Menu - Settings''' options and by using Session rules</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''wind speed''' - which will only affect the swaying motion of '''Speedtrees'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''snowline''' - the minimum snow altitude for assets that have a snow effect layer. Used with the '''world origin''' altitude setting</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''date''' - for assets that have different seasonal options. Used with the '''world origin''' to set the season of the year</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''lighting''' -  the light levels and colours through a 24 hour period</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''water colour''' and '''water surface''' effects (smooth, rough, etc) for '''Legacy Water''' only</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''road traffic''' - enabled/disabled</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''world origin''' - geographic coordinates (used with the '''date''' to set the season of the year) and altitude (used with the '''snowline''' to set snow effects)</td>
+</tr>
+</table>
+To set the '''Session Start Time''' use the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Startup_Options_Rule|Startup Options Rule]]''' or the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Time_and_Rate_Rule|Time and Rate Rule]]''' in the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_Session_Editor|Session&#160;Editor]]'''</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 68: / Line 102: @@
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
 <td>The dates at which the seasons change in '''Trainz''' are:-
-* '''March 1st''' - Southern Hemisphere '''Fall''' (Autumn), Northern Hemisphere '''Spring'''
+<table>
-* '''July 1st''' - Southern Hemisphere '''Winter''', Northern Hemisphere '''Summer'''
+<tr valign="top">
-* '''October 1st''' - Southern Hemisphere '''Spring''', Northern Hemisphere '''Fall''' (Autumn)
+<td width=10>[[image:RedDot10x10.png|link=]]</td>
-* '''December 1st''' - Southern Hemisphere '''Summer''', Northern Hemisphere '''Winter'''
+<td>'''March 1st''' - Southern Hemisphere '''Fall''' (Autumn), Northern Hemisphere '''Spring'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:RedDot10x10.png|link=]]</td>
+<td>'''July 1st''' - Southern Hemisphere '''Winter''', Northern Hemisphere '''Summer'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:RedDot10x10.png|link=]]</td>
+<td>'''October 1st''' - Southern Hemisphere '''Spring''', Northern Hemisphere '''Fall''' (Autumn)</td>
+</tr>
+<tr valign="top">
+<td>[[image:RedDot10x10.png|link=]]</td>
+<td>'''December 1st''' - Southern Hemisphere '''Summer''', Northern Hemisphere '''Winter'''</td>
+</tr>
+</table>
 </td>
 </tr>
@@ Line 82: / Line 130: @@
 </table>
 <br>
 <table width=1000>						<!-- BEGIN Nav Buttons Table NO SKIPS -->
 <tr valign="top">
@@ Line 112: / Line 159: @@
 </table>
 <br>
-<table width=1000>
+<table width=1000 cellpadding=2>
 <tr valign="top">
-<td colspan=2><span style="font-size: 17px; font-weight:700;">In Routes</span></td>
+<td><span style="font-size: 17px; font-weight:700;">In Routes</span></td>
 </tr>
+<tr valign="top">
+<td>
+<table width=996 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=992 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>
+<table>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>When you create a new '''Route''', or load an existing '''Route''' with NO saved '''Environmental''' settings, then the settings used will be the '''default''' values.</td>
+<td>When you create a new route, or load an existing one with '''NO''' saved Environmental settings, then all those settings will be set to their '''default''' values</td>
 </tr>
-<tr valign="top">
+<tr valign="top" bgcolor=#ffffb0>
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>If you change any of the '''Environmental''' settings of a '''Route''' then you must also edit the '''Route''' (e.g. change or edit a '''Route''' asset or feature) and save it for those settings to become part of the '''Route'''.</td>
+<td>If you change any of the nvironmental settings of a route then you must also edit the route (e.g. move a route asset) and save it for those settings to become part of the route</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 <tr valign="top">
-<td colspan=2><span style="font-size: 17px; font-weight:700;">In Sessions</span></td>
+<td><span style="font-size: 17px; font-weight:700;">In Sessions</span></td>
 </tr>
 <tr valign="top">
-<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>
-<td>When you create a new '''Session''', or load an existing '''Session''' with NO saved '''Environmental''' settings, then the '''Session''' will use the settings that are part of the '''Route'''. These could also be the '''default''' settings.</td>
+<table width=996 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=992 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>When you create a new session, or load an existing one with '''NO''' saved Environmental settings, then the session will use the settings that are part of the route which will be the '''default''' settings if none have been set for the route</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>When you load an existing '''Session''' with saved '''Environmental''' settings, then the settings from the '''Session''' will take priority over any settings that have been saved in the '''Route'''.</td>
+<td>When you load an existing session with saved Environmental settings, then those settings will take priority over the same settings that have been saved in the route</td>
 </tr>
-<tr valign="top">
+<tr valign="top" bgcolor=#ffffb0>
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>If you change any of the '''Environmental''' settings of a '''Session''' then you must also edit the '''Session''' (e.g. change or edit a '''Session''' asset or property) and save it for those settings to become part of the '''Session'''.</td>
+<td>If you change any of the Environmental settings of a session then you must also edit the session (e.g. move a session asset or change a session property) and save it for those settings to become part of the session</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 147: / Line 230: @@
 <tr valign="top">
 <td>[[image:PencilTips.PNG|link=]]</td>
-<td>Because a '''Session''' can have its own environmental settings you are able to create Sessions set in different conditions - for example:-
+<td>Because a '''Session''' can have its own environmental settings you are able to create Sessions set in different conditions - some examples:-
-*separate summer and winter sessions or for any season - see the [[image:PageLink.PNG|link=]] '''[[#Set_Date|Set Date]]''' and [[image:PageLink.PNG|link=]] '''[[#Set_World_Origin|Set World Origin]]''' sections below
+<table>
-*an early morning winter fog Session - see the [[image:PageLink.PNG|link=]] '''[[#Fog_Control|Fog Control]]''' section below
+<tr valign="top">
-*a spring rain shower Session - see the [[image:PageLink.PNG|link=]] '''[[#Set_the_Weather|Set the Weather]]''' section below
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-*a cool overcast autumn (fall) Session - see the [[image:PageLink.PNG|link=]] '''[[#Set_the_Sky|Set the Sky]]''' section below
+<td>separate summer and winter sessions or for any season - see the [[image:PageLink.PNG|link=]] '''[[#Set_Date|Set Date]]''' and [[image:PageLink.PNG|link=]] '''[[#Set_World_Origin|Set World Origin]]''' sections below</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>a session set in an early morning winter fog - see the [[image:PageLink.PNG|link=]] '''[[#Fog_Control|Fog Control]]''' section below</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>spring rain shower and cool overcast autumn (fall) sessions - see the [[image:PageLink.PNG|link=]] '''[[#Set_the_Weather|Set the Weather]]''' and [[image:PageLink.PNG|link=]] '''[[#Set_the_Sky|Set the Sky]]''' sections below</td>
+</tr>
+</table>
 </td>
 </tr>
@@ Line 159: / Line 252: @@
 </table>
 <br>
 <table width=1000>						<!-- BEGIN Nav Buttons Table NO SKIPS -->
 <tr valign="top">
@@ Line 184: / Line 276: @@
 <td>[[image:EnvironmentLaunch.PNG|link=]]&nbsp;&nbsp;&nbsp;</td>
 <td>[[image:EnvironmentEditLaunch.png|link=]]&nbsp;&nbsp;&nbsp;</td>
-<td>In all versions select '''Edit Environment'''</td>
+<td>In all versions select the option <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Environment...&#160;</span></td>
 </tr>
 </table>
@@ Line 190: / Line 282: @@
 This will open the '''Environment Properties Window''' as shown below.
-<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<table width=1000>
+<tr valign="bottom">
+<td width=485>[[image:EnvironmentControls.PNG|link=]]
+</td>
+<td>
+<table width=515 bgcolor=#000000 cellpadding=2>
 <tr valign="top">
-<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>
-<td>'''The Clock Dial shown in this tool does NOT set the game time.''' It sets the times at which lighting conditions change</td>
+<table width=511 bgcolor=#ffffb0 cellpadding=2>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td>[[image:NotePad.PNG|link=]]</td>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
+----
+</td>
 </tr>
 <tr valign="top">
-<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>To set the Game Time add the '''[[Session_Rule_List_with_Parameters#Startup_Options_Rule|Startup Options Rule]]''' or the '''[[Session_Rule_List_with_Parameters#Time_and_Rate_Rule|Time and Rate Rule]]''' in the '''[[How_to_Use_Session_Editor|Session Editor]]'''</td>
+<td>The '''Clock Dial''' shown in this tool does '''NOT''' set the game time. It sets the times at which lighting conditions change</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>To set the '''Session Start Time''' use the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Startup_Options_Rule|Startup Options Rule]]''' or the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Time_and_Rate_Rule|Time and Rate Rule]]''' in the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_Session_Editor|Session&#160;Editor]]'''</td>
 </tr>
 </table>
-<table width=1000>
-<tr valign="bottom">
-<td width=485>[[image:EnvironmentControls.PNG|link=]]
 </td>
-<td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
 '''TRS19''' and later '''Trainz''' versions have an additional control that adjusts the lighting level, as shown below<br>
 [[image:EnvironmentControlsTS19.PNG|link=]]
@@ Line 233: / Line 344: @@
 </table>
-==Light and Time==
+=='''Light and Time'''==
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
 <tr valign="top">
@@ Line 255: / Line 366: @@
 <table bgcolor=#ffffff cellpadding=2>
 <tr valign="top">
-<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To To see the full 24hr cycle:-</td>
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To see the full 24hr cycle:-</td>
 </tr>
 <tr valign="top">
@@ Line 273: / Line 384: @@
 </tr>
 </table>
-==='''The Time of Day'''===
+<table>
-<table width=660 bgcolor="lightcyan" cellpadding=2>
 <tr valign="top">
-<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>
-<td>You can select a specific time by dragging the clock pointer arm to the corresponding position on the clock dial.</td>
+<table width=660 cellpadding=2>
+<tr valign="top">
+<td>[[image:EnvironmentSetDial.PNG|link=]]</td>
+<td>
+==='''Selecting a Time'''===
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To set a specific time:-</td>
 </tr>
 <tr valign="top">
-<td>[[image:BlueDot10x10.png|link=]]</td>
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td>In '''Trainz Plus''' the '''Time of Day''' can be changed in '''Driver''' using the '''Session Options Palette'''</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click and Drag</span> the clock pointer arm to the required position on the clock dial</td>
 </tr>
 </table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffb0 cellpadding=2>
+<tr valign="top">
+<td>
 <table>
-<tr>
+<tr valign="top">
-<td>[[image:EnvironmentSetDial.PNG|link=]]</td>
+<td>[[image:NotePad.PNG|link=]]</td>
-<td>The scene shown in Surveyor will display the lighting conditions that correspond to the time shown on the clock</td>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
+----
+</td>
 </tr>
-</table></td>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>The clock dial does '''NOT''' set the starting time for a session</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>To set the '''Session Start Time''' use the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Startup_Options_Rule|Startup Options Rule]]''' or the [[image:WikiLink.PNG|link=]]&#160;'''[[Session_Rule_List_with_Parameters#Time_and_Rate_Rule|Time and Rate Rule]]''' in the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_Session_Editor|Session&#160;Editor]]'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>In '''Trainz Plus''' and '''TRS22''' the '''Session Time''' can be set "on the fly" in '''Driver''' from the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_S20_Palettes#The_Session_Options_Window|Session&#160;Options&#160;Window]]'''. But the time setting is approximate, it is not exact</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 297: / Line 453: @@
 <tr valign="top">
 <td width=629><span id="skipLighting"></span>
 =='''Setting the Lighting Conditions'''==
 </td>
@@ Line 302: / Line 459: @@
 <td width=50>[[image:SkipUp.png|link=#stepLighting|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 396: / Line 553: @@
 <td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
-<table>
+</td>
+</tr>
 <tr valign="top">
 <td colspan=2>Each '''control point''' stores the '''RGB''' values for three different types of lighting in the scene.</td>
@@ Line 410: / Line 568: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>The '''Water Colour''' which affects the colours reflected by water surfaces</td>
+<td>The '''Water Colour''' (for Trainz versions '''<u>before</u> TRS19 SP4''') which affects the colours reflected by water surfaces</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 546: / Line 701: @@
 <table bgcolor=#ffffff cellpadding=2>
 <tr valign="top">
-<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To set the '''Water Colour''' for legacy water only:-</td>
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To set the '''Water Colour''' for "legacy water" only:-</td>
 </tr>
 <tr valign="top">
@@ Line 579: / Line 734: @@
 </tr>
 </table>
+<br>
 ==='''Water Effect Layer'''===
@@ Line 641: / Line 796: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>'''Legacy Water''' is '''NOT''' compatible with the optional '''HD Terrain''' feature in '''Trainz Plus'''</td>
+<td>'''Legacy Water''' is '''NOT''' compatible with the '''Water Effect Layers''' in '''Trainz Plus''' and '''TRS22'''</td>
 </tr>
 </table>
@@ Line 798: / Line 953: @@
 </tr>
 <tr valign="top">
-<td>Creating a colour suitable for water (RGB values are approximate)</td>
+<td>For '''Legacy Water''' only:-<br>
+Creating a colour suitable for water (RGB values are approximate)</td>
 </tr>
 </table>
@@ Line 833: / Line 989: @@
 </table>
 <br>
+==='''Shadows'''===
+<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>The tone of shadows cast by objects is controlled by the combined effects of the '''Ambient Color''' and the '''Sun Color''' settings</td>
+</tr>
+</table>
+<br>
+<table width=1000 cellpadding=2>
+<tr valign="top">
+<td colspan=2 align="center">
+<span style="font-weight: 700; font-size: 15px;">These settings are examples only</span><br>
+Initial settings for the '''Ambient''' and '''Sun''' colours are shown in the image below with the resulting shadow effects. Lighting conditions are set for mid to late afternoon<br>
+[[image:Shadows_Initial.png|link=|500px]]
+<table width=996 bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td align="center">Shadows and lighting are "normal" for the time shown</td>
+</tr>
+</table>
+</td>
+</tr>
+<tr valign="top">
+<td width=496>
+<table width=496 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=492 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>'''Ambient''' colours set to '''0'''. '''Sun''' colours unchanged<br>
+[[image:Shadows_Ambient_Minimal.png|link=|500px]]
+<table bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td>The overall lighting is noticeably darker. Shadows are black</td>
+</tr>
+</table>
+</td>
+</tr>
+<tr valign="top">
+<td>
+----
+</td>
+</tr>
+<tr valign="top">
+<td>'''Ambient''' colours set to '''Maximum'''. '''Sun''' colours unchanged<br>
+[[image:Shadows_Ambient_Maximal.png|link=|500px]]
+<table bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td>The overall lighting is noticeably lighter. Shadows are lighter</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+<td width=496>
+<table width=496 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=492 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>'''Ambient''' colours unchanged. '''Sun''' colours set to '''0'''<br>
+[[image:Shadows_Sun_Minimal.png|link=|500px]]
+<table bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td>Scene is evenly lit but much darker. No shadows. A heavily overcast late afternoon?</td>
+</tr>
+</table>
+</td>
+</tr>
+<tr valign="top">
+<td>
+----
+</td>
+</tr>
+<tr valign="top">
+<td>'''Ambient''' settings unchanged. '''Sun''' settings set to '''Maximum'''<br>
+[[image:Shadows_Sun_Maximal.png|link=|500px]]
+<table bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td>Scene lighting is noticeably brighter. Shadows are darker but not black. A summer afternoon?</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+Moving the '''Ambient''' and '''Sun''' colour controls to values between '''0''' and '''Maximum''' will alter the results. Experimentation is a good idea.
+<br>
 ==='''Lighting Level Control'''===
@@ Line 895: / Line 1,148: @@
 <td width=50>[[image:SkipUp.png|link=#skipLighting|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 950: / Line 1,203: @@
 <td width=50>[[image:SkipUp.png|link=#skipResetLighting|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 994: / Line 1,247: @@
 <tr valign="top">
 <td>[[image:NotePad.PNG|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
-<table>
+</td>
+</tr>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
@@ Line 1,004: / Line 1,258: @@
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
 <td>The button can be deactivated by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on it again or by selecting another button.</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 1,055: / Line 1,306: @@
 <td width=50>[[image:SkipUp.png|link=#skipAddControl|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 1,097: / Line 1,348: @@
 <table bgcolor=#ffffb0 cellpadding=2>
 <tr valign="top">
-<td>[[image:NotePad.PNG|link=]]</td>
+<td width=25>[[image:NotePad.PNG|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
-<table>
+</td>
+</tr>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
@@ Line 1,108: / Line 1,360: @@
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
 <td>The button can be deactivated by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on it again or by selecting another button.</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 1,128: / Line 1,377: @@
 <td width=50>[[image:SkipUp.png|link=#skipDeleteControl|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 1,183: / Line 1,432: @@
 <tr valign="top">
 <td>[[image:NotePad.PNG|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
-<table>
+</td>
+</tr>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
@@ Line 1,193: / Line 1,443: @@
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
 <td>The button can be deactivated by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on it again or by selecting another button.</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 1,213: / Line 1,460: @@
 <td width=50>[[image:SkipUp.png|link=#skipMoveControl|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 1,278: / Line 1,525: @@
 <tr valign="top">
 <td width=25>[[image:NotePad.PNG|link=]]</td>
-<td>The '''Top Skybox''' region will set the colour for the '''Water Effect Layer''' in '''TRS19 SP4'''. In later '''Trainz''' versions ('''Trainz Plus''' and '''TRS22''') each '''Water Effect Layer''' (they can have several) has its colour built into the layer properties.</td>
+<td>The '''Top Skybox''' region will set the colour for the '''Water Effect Layer''' in '''TRS19 SP4'''.<br>
+In '''Trainz Plus''' and '''TRS22''' each '''Water Effect Layer''' (there can be more than one) has its water colour built into the layer properties - for more information see [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_S20_Tools#Edit_Effect_Layers...|Edit&#160;Effect&#160;Layers]]'''.</td>
 </tr>
 </table>
@@ Line 1,319: / Line 1,567: @@
 <tr valign="top">
 <td width=629><span id="skipFog"></span>
 =='''Fog Control'''==
 </td>
@@ Line 1,324: / Line 1,573: @@
 <td width=50>[[image:SkipUp.png|link=#skipSkybox|Skip Up]]</td>
 <td width=46>&#160;</td>
-<td width=75>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLighting|alt=Heading|To Heading]]</td>
 <td width=75>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 1,405: / Line 1,654: @@
 ='''Location'''=
 </td>
-<td width=50>&#160;</td>
+<td width=50>[[image:SkipDown.png|link=#skipSetOrigin|Skip Down]]</td>
 <td width=50>[[image:SkipUp.png|link=#skipFog|Skip Up]]</td>
 <td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
@@ Line 1,426: / Line 1,675: @@
 <td>
-==Set Date==
+=='''Set the Date'''==
 <table>
@@ Line 1,445: / Line 1,694: @@
 <td>[[image:Gears.PNG|link=]]</td>
 <td><span style="font-size: 17px; font-weight: 700;">Settings:'''</span><br>
-[[image:BlueDot10x10.png|link=]] '''Set the Month''' by scrolling '''left''' or '''right''' through the 12 month calendar<br>
+[[image:BlackDot10x10.png|link=]] '''Set the Month''' by scrolling '''left''' or '''right''' through the 12 month calendar<br>
-[[image:BlueDot10x10.png|link=]] '''Set the Day''' (if required) by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the date in the selected month
+[[image:BlackDot10x10.png|link=]] '''Set the Day''' (if required) by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the date in the selected month
 </td>
 </tr>
@@ Line 1,481: / Line 1,730: @@
 <td>[[image:BlueDot10x10.png|link=]]</td>
 <td>You '''must''' make a change to an object in a '''Route Layer''' or a '''Session Layer''' for the date change to be recorded as part of the Route or the Session (or both)
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor=#000000>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffe0>
+<tr valign="top">
+<td>[[image:PencilTips.PNG|link=]]</td>
+<td>
+'''Sick of it always being winter in your Session during winter? Want it to always be summer instead?'''<br>
+Set the date to a '''Summer''' month. This will be saved when you edit and save the '''Session''' - '''BUT''' make sure that you have set the '''World Origin''' to the correct hemiphere.</td>
+</tr>
+</table>
 </td>
 </tr>
@@ Line 1,499: / Line 1,763: @@
 Setting the year to '''1900''', for example, will not recreate an early 20th Century railroad. Time periods have to be recreated by carefully selecting scenery and rolling stock assets that belong to that particular time period.</td>
-</tr>
-</table>
-</td>
-</tr>
-</table>
-<br>
-<table width=1000 bgcolor=#000000>
-<tr valign="top">
-<td>
-<table width=996 bgcolor=#ffffe0>
-<tr valign="top">
-<td>[[image:PencilTips.PNG|link=]]</td>
-<td>
-<table>
-<tr valign="top">
-<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>'''Sick of it always being winter in your Session during winter? Want it to always be summer instead?'''<br>
-Set the date to a '''Summer''' month. This will be saved when you edit and save the '''Session''' '''BUT''' make sure that you have set the '''World Origin''' to the correct hemiphere.</td>
-</tr>
-<tr valign="top">
-<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>In '''Trainz Plus''' the date and therefore the '''Season''' can also be changed in '''Driver''' using the '''Session Options Palette'''</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 1,541: / Line 1,780: @@
 <td>
 <span style="color: white; background-color: black; font-weight: 700; font-size: 15px">&nbsp;To Set The Route Date:&nbsp;</span>
-<table>
+<table bgcolor=#ffffff>
 <tr valign="top">
 <td width=25>[[image:DotPoint1.JPG|link=]]</td>
@@ Line 1,560: / Line 1,799: @@
 </table>
 <span style="color: white; background-color: black; font-weight: 700; font-size: 15px">&nbsp;To Set The Session Date:&nbsp;</span>
-<table>
+<table bgcolor=#ffffff>
 <tr valign="top">
 <td width=25>[[image:DotPoint1.JPG|link=]]</td>
@@ Line 1,579: / Line 1,818: @@
 </table>
 <span style="color: white; background-color: black; font-weight: 700; font-size: 15px">&nbsp;To Set Both The Route and Session Dates:&nbsp;</span>
-<table>
+<table bgcolor=#ffffff>
 <tr valign="top">
 <td width=25>[[image:DotPoint1.JPG|link=]]</td>
@@ Line 1,616: / Line 1,855: @@
 <table>
 <tr valign="top">
-<td>[[image:DotPoint1.JPG|link=]]</td>
+<td width=20>[[image:DotPoint1RedC.png|link=]]</td>
 <td>If the '''Route''' and the '''Session''' are saved with different dates, then the '''Session''' date will decide the visible season.</td>
 </tr>
 <tr valign="top">
-<td>[[image:DotPoint2.JPG|link=]]</td>
+<td>[[image:DotPoint2RedC.png|link=]]</td>
 <td>If a '''Session''' does not have a saved date, then the '''Route''' date will decide the visible season.</td>
 </tr>
 <tr valign="top">
-<td>[[image:DotPoint3.JPG|link=]]</td>
+<td>[[image:DotPoint3RedC.png|link=]]</td>
 <td>If no date has been saved in the '''Route''' and the '''Session''', then today's date will decide the visible season.</td>
 </tr>
@@ Line 1,633: / Line 1,872: @@
 </table>
 </td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffe0 cellpadding=2>
+<tr valign="top">
+<td>[[image:PencilTips.PNG|link=]]</td>
+<td>In '''Trainz Plus''' and '''TRS22''' the '''Month''' and therefore, the '''Season of the Year''' can be set "on the fly" in '''Driver''' from the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_S20_Palettes#The_Session_Options_Window|Session&#160;Options&#160;Window]]'''. The '''North/South Hemisphere''' must also be correctly set in the '''World Origin''' or '''Region'''</td>
 </tr>
 </table>
@@ Line 1,642: / Line 1,894: @@
 </table>
 <br>
+<table width=1000>						<!-- BEGIN Nav Buttons Table SKIPS NO SECTIONS -->
-==Set World Origin==
+<tr valign="top">
+<td width=629><span id="skipSetOrigin"></span>
+=='''Set World Origin'''==
+</td>
+<td width=50>[[image:SkipDown.png|link=#skipEditOrigin|Skip Down]]</td>
+<td width=50>[[image:SkipUp.png|link=#stepLocation|Skip Up]]</td>
+<td width=46>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLocation|alt=Heading|To Heading]]</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 The middle section is the '''World Origin Tool''' and sets the geographic location, including the altitude, of the route using a '''World Origin''' marker that is only visible in Surveyor.
@@ Line 1,715: / Line 1,978: @@
 </table>
 <br>
+<table width=1000>						<!-- BEGIN Nav Buttons Table SKIPS NO SECTIONS -->
-==Editing the World Origin==
+<tr valign="top">
+<td width=629><span id="skipEditOrigin"></span>
+=='''Editing the World Origin'''==
+</td>
+<td width=50>[[image:SkipDown.png|link=#skipDeleteOrigin|Skip Down]]</td>
+<td width=50>[[image:SkipUp.png|link=#skipSetOrigin|Skip Up]]</td>
+<td width=46>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLocation|alt=Heading|To Heading]]</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 <table width=1000>
@@ Line 1,764: / Line 2,038: @@
 <table>
 <tr valign="top">
-<td width=25>[[image:NotePad.PNG|link=]]</td>
+<td>[[image:NotePad.PNG|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
 </td>
 </tr>
-</table>
-<table>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
@@ Line 1,790: / Line 2,062: @@
 </table>
 <br>
-==Deleting the World Origin==
+<table width=1000>						<!-- BEGIN Nav Buttons Table SKIPS NO SECTIONS -->
+<tr valign="top">
+<td width=629><span id="skipDeleteOrigin"></span>
+=='''Deleting the World Origin'''==
+</td>
+<td width=50>[[image:SkipDown.png|link=#skipTrafficControl|Skip Down]]</td>
+<td width=50>[[image:SkipUp.png|link=#skipEditOrigin|Skip Up]]</td>
+<td width=46>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLocation|alt=Heading|To Heading]]</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 1,858: / Line 2,142: @@
 <td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
 ----
-All routes '''MUST''' have a '''World Origin'''.<br>
+</td>
+</tr>
-If you delete the marker then the '''World Origin''' will be hidden and will take the default coordinates of '''latitude 52.45 N''', '''longitude 13.3 E''', '''altitude 0 metres''' - which places it in '''Berlin'''(??).
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>All routes '''MUST''' have a '''World Origin'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>If you delete the '''World Origin''' marker then it will be hidden and will take the default coordinates of '''latitude 52.45 N''', '''longitude 13.3 E''', '''altitude 0 metres''' - which places it in '''Berlin
 </td>
 </tr>
@@ Line 1,871: / Line 2,161: @@
 </table>
-==Traffic Control==
+<table width=1000>						<!-- BEGIN Nav Buttons Table SKIPS NO SECTIONS -->
+<tr valign="top">
+<td width=629><span id="skipTrafficControl"></span>
+=='''Traffic Control'''==
+</td>
+<td width=50>[[image:SkipDown.png|link=#stepWeather|Skip Down]]</td>
+<td width=50>[[image:SkipUp.png|link=#skipDeleteOrigin|Skip Up]]</td>
+<td width=46>&#160;</td>
+<td width=75>[[image:HeadingUp.png|link=#stepLocation|alt=Heading|To Heading]]</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 1,919: / Line 2,222: @@
 <td>[[image:Gears.PNG|link=]]</td>
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
-[[image:BlueDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the car icon to '''enable''' and '''disable''' traffic</td>
+[[image:BlackDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the car icon to '''enable''' and '''disable''' traffic</td>
 </tr>
 <tr>
@@ Line 1,936: / Line 2,239: @@
 </td>
 <td width=50>&#160;</td>
-<td width=50>&#160;</td>
+<td width=50>[[image:SkipUp.png|link=#skipTrafficControl|Skip Up]]</td>
 <td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
 <td width=75>[[image:NextUp.png|link=#stepLocation|alt=Next Up|Top]]</td>
@@ Line 1,979: / Line 2,282: @@
 <td>[[image:Gears.PNG|link=]]</td>
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
-[[image:BlueDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the '''Sky Title''' (Cloud Cover) to select from a drop down list of sky types, <span style="font-weight: 700; font-size: 15px;">OR</span><br>
+[[image:BlackDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the '''Sky Title''' (Cloud Cover) to select from a drop down list of sky types, <span style="font-weight: 700; font-size: 15px;">OR</span><br>
-[[image:BlueDot10x10.png|link=]] Scroll through the list by using the '''Scroll''' icons
+[[image:BlackDot10x10.png|link=]] Scroll through the list by using the '''Scroll''' icons
 </td>
 </tr>
@@ Line 1,992: / Line 2,295: @@
 The box below the sky title will give a preview of the selected sky.
-==Set the Weather==
+=='''Set the Weather'''==
 <table bgcolor="lightcyan" cellpadding=2>
@@ Line 2,013: / Line 2,316: @@
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
 [[image:EnvironmentWeatherType.PNG|link=]]<br>
-[[image:BlueDot10x10.png|link=]] Move the slider to set the weather between '''Rain''' and '''Snow'''</td>
+[[image:BlackDot10x10.png|link=]] Move the slider to set the weather between '''Rain''' and '''Snow'''</td>
 </tr>
 <tr>
@@ Line 2,040: / Line 2,343: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>In '''Trainz Plus''' the weather can also be changed in '''Driver''' using the '''Session Options Palette'''</td>
+<td>In '''Trainz Plus''' and '''TRS22''' the '''Weather''' can be set "on the fly" in '''Driver''' from the [[image:WikiLink.PNG|link=]]&#160;'''[[How_to_Use_S20_Palettes#The_Session_Options_Window|Session&#160;Options&#160;Window]]'''</td>
 </tr>
 </table>
@@ Line 2,053: / Line 2,356: @@
 </table>
-==Wind Strength==
+<table width=1000 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px;">Trainz Plus/TRS22 Platinum Driver Weather Controls</span><br>
+In '''Trainz Plus''' and '''TRS22''' when in '''Driver''' mode open the [[image:SurveyorWindowIcon.png|link=]]&#160;'''Window&#160;Menu''' and <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Session Options&#160;</span> and you will have access to '''Weather Controls''' to change the weather "on-the-fly".
+<table>
+<tr valign="top">
+<td>[[image:SessionOptionsPaletteWeather_S20.png|link=]]</td>
+<td>
+<table>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Weather&#160;</span></td>
+<td>this drop down list will show all the different weather conditions from '''Clear''' to '''Heavy Snow'''. <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the required setting</td>
+</tr>
+</table>
+</td>
+</tr>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Weather&#160;Changeability&#160;</span></td>
+<td>this drop down list will set the rate and range of the weather changeability. <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on '''None''', '''Periodic''' or '''Extreme'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+=='''Wind Strength'''==
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 2,070: / Line 2,417: @@
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
 [[image:EnvironmentWindType.PNG|link=]]<br>
-[[image:BlueDot10x10.png|link=]] Move the slider to set the wind strength between zero (left) and maximum (right)
+[[image:BlackDot10x10.png|link=]] Move the slider to set the wind strength between zero (left) and maximum (right)
 </td>
 </tr>
@@ Line 2,080: / Line 2,427: @@
 <br>
-==Set the Water Surface==
+=='''Set the Water Surface'''==
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 2,101: / Line 2,448: @@
 <td>[[image:Gears.PNG|link=]]</td>
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
-[[image:BlueDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the '''Water Surface''' to select from a drop down list of surface effects, <span style="font-weight: 700; font-size: 15px;">OR</span><br>
+[[image:BlackDot10x10.png|link=]] <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the '''Water Surface''' to select from a drop down list of surface effects, <span style="font-weight: 700; font-size: 15px;">OR</span><br>
-[[image:BlueDot10x10.png|link=]] Scroll through the list by using the '''Scroll''' icons
+[[image:BlackDot10x10.png|link=]] Scroll through the list by using the '''Scroll''' icons
 </td>
 </tr>
@@ Line 2,114: / Line 2,461: @@
 <br>
-==Set the Snow Altitude==
+=='''Set the Snow Altitude'''==
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 2,135: / Line 2,482: @@
 <td><span style="font-size: 17px;">'''Settings:'''</span><br>
 [[image:EnvironmentSnowAltitude.PNG|link=]]<br>
-[[image:BlueDot10x10.png|link=]] Enter the minimum altitude, in metres, at which snow can appear.</td>
+[[image:BlackDot10x10.png|link=]] Enter the minimum altitude, in metres, at which snow can appear.</td>
 </tr>
 <tr>
@@ Line 2,150: / Line 2,497: @@
 <tr valign="top">
 <td>[[image:NotePad.PNG|link=]]</td>
-<td><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
 ----
-<table>
+</td>
+</tr>
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
@@ Line 2,169: / Line 2,517: @@
 </tr>
 </table>
-</td>
-</tr>
-</table>
-<td>
 </td>
 </tr>

How to Use Environment Tools

Latest revision as of 08:02, 17 March 2024

Contents

[edit] Loading and Saving Environmental Settings

[edit] The Environment Tool

[edit] Lighting

[edit] Light and Time

[edit] The Diurnal Cycle

[edit] Selecting a Time

[edit] Setting the Lighting Conditions

[edit] Colour Control Points

[edit] Types of Lighting

[edit] Ambient Colour

[edit] Sun Colour

[edit] Water Colour

[edit] Water Effect Layer

[edit] Mixing Colours

[edit] Shadows

[edit] Lighting Level Control

[edit] Resetting the Lighting Conditions

[edit] Adding a New Control Point

[edit] Deleting a Control Point

[edit] Moving a Control point

[edit] The Skybox

[edit] Fog Control

[edit] Location

[edit] Set the Date

[edit] Set World Origin

[edit] Editing the World Origin

[edit] Deleting the World Origin

[edit] Traffic Control

[edit] Weather and Water

[edit] Set the Sky

[edit] Set the Weather

[edit] Wind Strength

[edit] Set the Water Surface

[edit] Set the Snow Altitude

[edit] Trainz Wiki

Views

Personal tools

Navigation

Search

Toolbox