SAR Scenario Peterborough Shunter

From TrainzOnline
Revision as of 13:57, 28 February 2021 by Pware (Talk | contribs)

Jump to: navigation, search
 Peterborough Shunter 
A scenario in the SAR Peterborough Base Session
Shunting operations that cover the length of Peterborough Yard and Peterborough Depot. Bottom

Peterborough Shunter
 Duration:  1 hour
 Loco:  SAR T 233 on Peterborough Depot Shed Road 1

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 1

Location Index

Location Index
Each location in the layout has a detailed set of track diagrams that provide a variety of information. The  Getting Started  guide below gives a summary of the information that is available.

To display the data click any Line Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. The first step is to pause the session by pressing the P key.
  2. Next locate your loco. Either:-
    1. Open the Finder Tool (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 233 (or just T 233 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Use the Location Index (this link will open in this window) and click on Peterborough to load its location details and track plans. In each location details page:-
    • the Tab PH Grey.png tab will identify the EIT Paths that are available if you wish to use them.
    • the Tab TM Grey.png tab will reveal the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab will show all active industries and their commodities.
    • the Tab SW Grey.png tab will give you the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location page has direct links to the next locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and press the P key to start the session.

 Yard Map: 
Strip Map
Yard map


  1. Move the loco out of the  Loco  Depot and navigate through to the other side of Peterborough Yard onto the  Stockyard  road.
  2. Reverse onto  Goods Siding 4  and attach to the rake of empty MTW flat wagons stored there.
  3. Move the empty wagons to the  Goods Crane  and load.
  4. Shunt the loaded wagons to  Goods Siding 3  and stable.
  5. Move the loco to  Goods Siding 5  and attach to the rake of empty Livestock wagons stored there.
  6. Shunt the empty wagons to the  Stockyard Siding  at the far end of the  Stockyard  road for pickup by a later service.
  7. Move the loco back into the main depot to the  Loco Depot Sidings  next to the tall water tower. There are empty coal (CCC) and fuel (Tanker) wagons stored on two of the siding roads.
  8. Shunt the two wagon sets into a single consist and stable on one of the empty  Loco Depot Sidings  roads for later pickup and return to Port Pirie.
  9. Move the loco to the back of the workshop area at the end of the  Depot  Repair Storage Road .
  10. Attach to loco SAR T 229 (not in steam) and move it into the repair shop on  Depot  Repair Shop Road  2 or 3. Detach the loco.
  11. Return the loco to its starting position on  Depot  Shed Road  1.

Driving Notes:
  • You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.

Links: All links will open in this window
Session Scenarios List
Location Index
Location List
Rolling Stock
Rolling Stock
Active Industries

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

Personal tools