SAR Scenario Livestock Shuttle

From TrainzOnline
Revision as of 07:24, 20 October 2022 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png   21   Peterborough Livestock Shuttle  ArrowRightBtn.png
A scenario in the SAR Peterborough Base Session v2.0
Livestock movements to Peterborough from Terowie and other locations from Paratoo to Ucolta. Bottom

Livestock Shuttle
 Era:  1920s to 1960s
 Duration:  Peterborough: 45 minutes
Return: 100 minutes
 Loco:  The Loco Roster Label.png has locos available at the  Terowie Loco Depot 

and at the  Peterborough Loco Depot  for an optional loco swap

 Consist: 

on the Terowie  Stockyard Siding .

Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of your selected loco, for example SAR T 198 (or just T 198 which should be enough), then click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 198) OR
    • the driver icon (named Driver 198) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco.
  3. Take a few moments to get your bearings. Click Terowie Data (this link will open in this window) to show the location details and track plans for Terowie. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location details page has direct links to the adjacent locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to Driver Mode and close the opening message window (if it is still on the screen) or press the  P  key (if it is not) to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:
  1. Reverse the loco and tender out of the  Loco Depot  yard and onto the  Stockyard Road 
  2. Couple to the livestock consist stored in either:-
    •  Stockyard Siding 1  (cattle wagons), or
    •  Stockyard Siding 2  (sheep wagons)
  3. Proceed to the Terowie  Stockyard Transfer  platform and load livestock
  4. Proceed to Peterborough Yards. Take coal and water when required
  5. Shunt the train to either the Peterborough  Stockyard 1  (Cattle) or Peterborough  Stockyard 2  (Sheep) and unload
  6. Pull the wagons back to Peterborough Yards and run the loco around the train
  7. Proceed according to the working timetable shown below to either:-
    • Paratoo dropping wagons as specified. Take coal and water when required. Return to Peterborough collecting loaded wagons to unload at the stockyards and then run empty to Terowie
    • Terowie with empty wagons
  8. At Terowie stable the wagons in a vacant  Stockyard Siding 
  9. Coal, water and stable the loco
Logo
 Terowie-Peterborough-Paratoo Livestock Timetable 
  Frequency

Train №
(M) W (F)
TL18
  (when required)
Terowie Depot CEFJOWX dep 08:00    
Livestock Siding arr 08:mm   Collect livestock wagons from Siding 1 or Siding 2
Livestock Transfer arr L   Load livestock
Terowie dep 08:mm    
Gumbowie FUX   ..    
Peterborough Yard CEFJOWX arr hh:mm    
Peterborough Stockard N   uNload livestock
Peterborough Yard arr hh:mmCW   Coal and Water loco when required. Turn and run loco around train or swap loco
Frequency
Train №
  W
PL18
 
Peterborough Yard dep   hh:mm  
Ucolta UWX arr   hh:mmW Water loco when required. Deliver X wagons to stockyard
Oodla Wirra UWX arr   hh:mmW Water loco when required. Deliver X wagons to stockyard
Peechara Loop X     ..  
Nackara UWX arr   hh:mmW Water loco when required. Deliver X wagons to stockyard
Methuen Loop X     ..  
Paratoo ΔCWX arr   hh:mmCW Turn loco on WYE. Deliver X wagons to stockyard. Coal and water loco when required.
Frequency
Train №
  W
PL18
 
Paratoo Stockyard dep   hh:mm Collect loaded livestock wagons
Paratoo dep   hh:mm  
Methuen Loop       ..  
Nackara   arr   hh:mmW Water loco when required. Collect wagons from stockyard
Peechara Loop       ..  
Oodla Wirra   arr   hh:mmW Water loco when required. Collect wagons from stockyard
Ucolta   arr   hh:mmW Water loco when required. Collect wagons from stockyard
Peterborough Yard CEFJOWX arr   hh:mm  
Stockyard     N uNload livestock
Peterborough Yard CEFJOWX arr   hh:mmCW Coal and Water loco when required. Turn and run loco around train or swap loco
Frequency
Train №
(M F)
TL17
W
TL19
(when required)
Peterborough Yard dep hh:mm hh:mm  
Gumbowie .. ..  
Terowie Livestock Transfer arr hh:mm hh:mm Unload wagons. Stable wagons in siding
Depot arr hh:mm hh:mm Coal, water and stable loco
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals J = Junction
O = Loco Turntable U = Unattended W = Loco Water Tank X = Crossing Loop
Strip Map
Route Key
Driving Notes:

A summary of the facilities and product loads at all locations along the lines is provided in the links

Port Pirie-Broken Hill Line and Peterborough-Terowie Line
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Industry active stations (where you can use the Drive To industry command) are only at Gladstone, Jamestown, Peterborough and Terowie. Industry active stations will have a longer than expected wait time.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
ArrowLeftBtn.png Scenarios
Session Scenarios
Location Index
Location List
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png


This page was created by Trainz user pware in June 2022 and was last updated as shown below.


Personal tools