How to Use Track Direction Markers

From TrainzOnline
Revision as of 13:59, 26 December 2022 by Pware (Talk | contribs)

Jump to: navigation, search

The information in this Wiki Page applies to TANE, TRS19, Trainz Plus and TRS22.

Contents

In Summary:
DotPoint.JPG Track Direction Markers are yellow coloured track markers that are invisible in Driver Mode but visible in Surveyor Mode
DotPoint.JPG Track Direction Markers are used as "One Way" signs to force trains under AI control to travel in a specific direction through the track section where they are placed
DotPoint.JPG Track Direction Markers only work on AI controlled trains. They have no effect on manually controlled trains
  Top   Next Down Bottom

What are Track Direction Markers?

While Track Marks can be used to direct trains around a layout, they must be added to the Driver Commands in the form of Drive Via commands, and similar, to individual train drivers to work. Direction Markers can perform some of the same work without needing to be added to the command lists of the drivers. Their disadvantage is that Direction Markers will affect all AI controlled trains while Track Marks will only affect those AI trains where they appear in the driver command lists.

Direction Markers force AI drivers to follow a particular path. They only work on AI controlled trains and have no effect on manually controlled trains.

Route or Session?

DotPoint.JPG Direction Markers can be placed in a Route layer or in a Session layer


NotePad.PNG Notes:

DotPoint.JPG Placing Direction Markers in a Route layer (e.g. in the same layer as the track) means that they will be available in all Sessions created using that particular Route.
DotPoint.JPG Placing Direction Markers in a Session layer means that they will only be available in that Session. This can be useful if two or more Sessions are being created and you want to use different Direction Markers in each Session.


LinkWiki.PNG Information on Route and Session layers can be found at:-


  Top Next Up Next Down Bottom

Adding a Track Direction Marker

NotePad.PNG Notes:

A Direction Marker has no useful properties other than the direction it is pointing. This is the direction that all AI controlled trains will be forced to take.


 In Surveyor Classic (S10) 

TrackDirectionTools.png

Steps.PNG Steps:
  1. Open the Track Tool
  2. Select the Trackmark button
  3. Select the Track Direction Marker
  4. Select the + (add) button - it may already be selected
  5. Left click on the track location where the Direction Marker is to be placed
  6. If it is not facing the correct direction, rotate the marker to point in the opposite direction


 In Surveyor 2.0 (S20) 

 Adding a Direction Marker 

DotPoint1.JPG In the Asset Palette either:-

Ablue.png Left click the Track Mesh Filter icon

Track mesh

OR
Bblue.png Left click the Content Drop-down Box

Filter List
Then select Track Objects
Track Objects

PencilTips.PNG  Shortcut 

If you already have a Direction Marker in your route then:-

  1. select the Eyedropper Tool in the Tools Palette (or press the  R  key)
  2. Left click on the existing Direction Marker object

This will instantly select the Direction Marker in the filter list.

Jump down to Step DotPoint5.JPG below.


DotPoint2.JPG To narrow down the filter list, type "mark" (UPPER/lower case does not matter) in the Search Text Box

Text search
DotPoint3.JPG This will list all the Track Objects containing the text "mark" in the filter list.
Filtered list DotPoint4.JPG Select the item AI Routing Direction Marker or Track Direction Marker.


NotePad.PNG Notes:

There are two separate Direction Markers available.

  • Track Direction Marker - this is the original version
  • AI Routing Direction Marker - this is similar to the original but it does not affect signal operations


If you are not sure about an asset then double-click on the name to bring up its image and description.

DotPoint5.JPG Place the Direction Marker on the track.

Add direction marker


NotePad.PNG Notes:

To delete a Direction Marker (or any asset):-

  1. select either the:-
    • Free Move Tool (or press  S ) or
    • Fine Adjustment Tool (or press  D )
  2. Left click on the Direction Marker
  3. press the  Delete  key

Steps.PNG Steps:
DotPoint1Blue.png Select the Placement Tool (or press the  E  key) from the Tools Palette
DotPoint2Blue.png Left click on the track at the position where you want to place the Direction Marker

The Direction Marker can be easily moved if needed - see below.



Tools and keymap for S20


 Set the Direction Marker Properties 

DirectionmarkAdjust S20.png DotPoint3Blue.png Change Its Direction

The direction the marker points is its ONLY important property.


Steps.PNG If you need to rotate the Direction Marker to face the opposite direction then:-
  1. Left mouse on its Context Tool (DotPoint3Blue.png in the image on the left or press the  T  key) to open up the object property and control menu
  2. from the popup menu select Rotate Trackside

DotPoint3Blue.png Change Its Name
The name of the marker is only useful for finding it in the route. It is not needed for any operational purpose.

Steps.PNG Steps:
  1. Left click on the Context Tool (DotPoint3Blue.png in the image on the left or press the  T  key) to open up the object property and control menu
  2. Left click on Edit Properties
  3. enter a name for the Direction Marker
  4. click the Tick.PNG to accept the change or the Cross.PNG to reject it


 Move the Direction Marker 

DotPoint4Blue.png Move it Along the Track


Steps.PNG Steps:
  1. Left click and hold down the mouse button on the Yellow Dot next to the Direction Marker (DotPoint4Blue.png in the image above)
  2. While holding down the Left mouse button, move the mouse Forward or Backward to drag the Direction Marker along the track


DirectionmarkFineAdjust S20.png DotPoint5Blue.png Reposition it Up/Down

This feature allows a Direction Marker to be physically placed above the track so that it will not be hidden if a consist is parked on the Direction Marker.


Steps.PNG Steps:
  1. Select the Fine Adjustment Tool (or press the  D  key)
  2. Left click and hold down the mouse button on the Blue Vertical Axis Line above the Direction Marker (DotPoint5Blue.png in the image on the left)
  3. While holding down the Left mouse button, move the mouse Forward or Backward to move the Direction Marker Up or Down

PencilTips.PNG If you need to return the Direction Marker to its original position then:-
  1. Left click on its Context Tool (or press the  T  key if the asset has already been selected)
  2. from the popup menu select Reattach to Track


DotPoint6Blue.png Reposition it Left/Right
This feature allows a Direction Marker to be physically placed left or right alongside the track so that it will not be hidden if a consist is parked on the Direction Marker.


Steps.PNG Steps:
  1. Select the Fine Adjustment Tool (or press the  D  key)
  2. Left click and hold down the mouse button on the Red Horizontal Axis Line on the Direction Marker (DotPoint6Blue.png in the image above)
  3. While holding down the Left mouse button, move the mouse Forward or Backward to move the Direction Marker Left or Right of the track
NotePad.PNG Notes:

The Green Horizontal Axis Line also shown in the image above pointing forward from the Direction Marker will move the Direction Marker forward/backward regardless of whether it is on the track or not. It has the same effect as the instructions shown in DotPoint4Blue.png Move it Along the Track above.


PencilTips.PNG If you need to return the Direction Marker to its original position then:-
  1. Left click on its Context Tool (or press the  T  key if the asset has already been selected)
  2. from the popup menu select Reattach to Track


 Assign a Direction Marker to a New Layer 

The Info Palette will show the layer assigned to the currently selected object. To the left of the layer name is a small arrow object.

Info palette

Layer control


Steps.PNG Steps:
  1. click the small arrow next to the layer name. This will open the layer properties for the selected object
  2. click the Layer drop down box to select a new layer for the object
  3. if required, click the Binding drop down box to select a new binding layer for the object
  4. if required, click the  Lock Layer  button to lock the selected layer. If the layer is already locked then this will be shown as an  Unlock Layer  button


Stop.PNG WARNING:

You will not be allowed to place a track object in a layer that is higher up the list than the layer containing the track.


LinkWiki.PNG Information on layers can be found at:-
  Top Next Up   Bottom

Direction Marker Operation

Main Points:
DotPoint.JPG Track Direction Markers only work on AI controlled trains. They have no effect on manually controlled trains
DotPoint.JPG If the set path is blocked, then the AI will NOT attempt to find another path
DotPoint.JPG A set path will be ignored if a shorter path is available

Consider the situation represented in the diagrams below. An AI controlled train is moving left to right towards a junction and a loop line. A Direction Marker (yellow triangle) has been set on the main line which only allows AI trains traveling right-to-left to pass along that section of track.

In Figure 1 below, The train approaches the junction at the start of the one way section.

Direction Map - approach
Figure 1


In Figure 2 below, the train has been forced to take the loop line to avoid the section controlled by the Direction Marker.

Direction Map - bypass
Figure 2


In Figure 3 below, the loop line has been blocked by another train. The moving train will attempt to use the loop line but it will be halted and will not attempt to find another path.

Direction Map - blocked
Figure 3


Direction Markers can be ignored by the AI
In Figure 4 below, the marker has been placed on the loop line and is pointing in the same direction as the moving train. However, the mainline path represents the shorter route for the consist so the "preferred" direction, as indicated by the Direction Marker, is ignored. Placing a Direction Marker is no guarantee that the path will be followed if more suitable paths are available.

Direction Map - path ignored
Figure 4

Related Links

LinkWiki.PNG


  Top Next Up    


Trainz Wiki

TrainzWiki.png

More Tutorials and Guides to Using Trainz

Personal tools