How to Use S20 Tools

From TrainzOnline
Revision as of 23:11, 26 July 2023 by Pware (Talk | contribs)

Jump to: navigation, search

The information in this Wiki Page applies to Surveyor 2.0 (S20) as found in Trainz Plus. The original reference material for this document can be found at WikiLink.PNG Surveyor 2.0 Overview

          Next Down Bottom

Contents

Surveyor 2.0  Mouse  and  Keyboard  Aids and Shortcuts
 Operations 
 LClick  Left Click on an object to Select it
 Shift   LClick  hold down the Shift key and Left Click on another object to add it to the Selection
 LClick   Drag  Left Click and Drag to Move an object or a group of selected objects
 RClick  Right Click on the terrain to Move the Compass Rose and Focus to that location or to open a setting menu in the Tool Options Palette
 DLClick  Double Left Click on an object to add it and all nearby identical objects into a single Selection
DotPointBlueSquare.png when used on a consist all the wagons in the consist, regardless of type, will be selected
DotPointBlueSquare.png when used on a spline or track all the segments upto the next junction (in both directions) will be selected
 Shift   DLClick  hold down the Shift key and Double Left Click on another object to add it and its nearby identical objects to those already in the Selection
 Ctrl   LClick   Drag  hold down the Ctrl key and Left Click and Drag to Clone an object or selected objects
 Ctrl   C  press Ctrl + C to Copy selected objects (including the ground height, ground textures and any effect layers) into a new Scrapbook
 Ctrl   D  press Ctrl + D to Unselect a selected object (or ALL objects if multiple objects have been selected)
 Ctrl   E  press Ctrl + E to open the Route Editor (to edit the route name, description, thumbnail, scale, etc)
 Ctrl   F  press Ctrl + F to open the Object Finder
 Ctrl   F1  press Ctrl + F1 to switch from Driver to Surveyor via the UDS inteface
 Ctrl   F2  press Ctrl + F2 to switch from Surveyor to Driver via the UDS inteface
 Ctrl   M  press Ctrl + M to open the Mini Map
 Ctrl   R  press Ctrl + R to open the Session Editor (to edit the session name, description and rules)
 Ctrl   S  press Ctrl + S to Save the current route and/or session (which ever has been edited)
 Ctrl   V  press Ctrl + V to Paste the current Scrapbook into the route at the cursor position (the Surveyor Compass Rose). The current settings in the Scrapbook Palette Filter will control which objects are pasted and how they are pasted
 Ctrl   X  press Ctrl + X to Cut and remove selected objects from the route and place them into a new Scrapbook. The ground height, ground textures, effect layers and any objects in locked layers will be copied, not cut
 Ctrl   Y  press Ctrl + Y to Redo (reverse) the last  Ctrl   Z  command
 Ctrl   Z  press Ctrl + Z to Undo previous actions
 Ctrl   Space  press Ctrl + Space to show/hide the User Interface (the Trainz Main Menu icons and all the docked palettes - undocked palettes will still be visible)
 Alt  hold down the Alt key and hover the tool pointer over an object to Identify it
 Alt   LClick  hold down the Alt key and Left Click on an object to Select it in the Assets Palette and to copy some data from the object to the Tool Options Palette
 Delete  press the Delete key to Delete a selected object or objects from the route
 Tools 
 W  selects the Brush Tool S20 BrushToolIcon.png ToolsKeyboard S20.png
 E  selects the Placement Tool S20 PlacementToolIcon.png
 R  selects the Eyedropper Tool S20 DropperToolIcon.png
 S  selects the Free Move Tool S20 FreeMoveToolIcon.png
 D  selects the Fine Adjustment Tool S20 FineAdjustmentToolIcon.png
 F  selects the Marquee Tool S20 MarqueeToolIcon.png
 T  opens the Context Menu of a selected object ContextIconsOneRow S20.png


NotePad.PNG Assets and Objects

(from the Surveyor 2.0 Overview document)

In this online documentation, the term Asset is used when talking about the items listed in Content Manager and the Asset Palette. Every asset has a KUID (unique identifier). When an asset (selected in the Assets Palette) is placed into the world, the instance of the asset in the world is referred to as an Object. There are multiple types of object, such as Scenery, Splines, Trains, Trackside, etc.


Surveyor 2.0 vs Surveyor Classic

    Top   Next Down Bottom
Surveyor 2.0
Surveyor 2.0 (or S20) is the new Surveyor interface provided to Trainz Plus Gold and Trainz Plus Standard subscribers as an alternative to Surveyor Classic. Classic is still available as an option in Trainz Plus. S20 is also available in TRS22 for Trainz Plus subscribers only. TRS22 without the subscription will have Surveyor Classic.
Whats New
BlueDot10x10.png a single set of common tools that can be applied to ALL types of objects
BlueDot10x10.png the ability to select multiple objects of different types that can be manipulated as one with more freedom than was previously possible
BlueDot10x10.png each object has its own Context Menu that applies specific actions depending on the type of object
BlueDot10x10.png information and controls in dockable and moveable Palettes that can be hidden when not needed
BlueDot10x10.png a new Scrapbook asset to store "scenes" that can be pasted anywhere in a route, between routes and shared through the DLS
BlueDot10x10.png a new Marquee Tool that allows:-
DotPointBlueSquare.png multiple baseboards to be added, deleted and have their height, ground texture and grid resolution changed in a single operation
DotPointBlueSquare.png objects, ground heights, ground textures and effect layers to be moved and copied


The following screen images help illustrate the change in philosophy that has occurred with the release of the Surveyor 2.0 user interface.

 Surveyor Classic 

2002 - 2022

Surveyor10Screen.png
DotPoint.JPG all the tools are in separate fixed Tabbed Flyouts with a different Flyout and set of tools for each type of object (scenery, track, terrain, textures, trains, etc)
DotPoint.JPG the workflow forces you to select the correct tool for the type of object and then apply it to just a single object at a time


 Surveyor 2.0 

2022 -

Surveyor20Screen.png
DotPoint.JPG there is just one set of tools that can be applied to all types of objects
DotPoint.JPG the workflow allows you to select multiple objects (that can be of different types) and then apply a selected tool or operation to them all


The Tools Palette

    Top Next Up Next Down Bottom
BlueDot10x10.png The Tools Palette is at the core of the new interface and takes the place of all the Tool Flyouts that have been the standard for Trainz Surveyor for many years. Some of the tools are new while others have been given a makeover and new abilities.
Tools and keymap for S20


The  Context Tool  is attached as an icon to a selected or newly placed object. The icon design will vary according to the type of object.

NotePad.PNG Notes: Palettes

If the Tools Palette is not shown on the screen, then:-

Windows Menu
Steps: To display palettes:-
DotPoint1.JPG open the SurveyorWindowIcon.png Window Menu from the menu icons at the top of the screen
 
BulletTick.png visible palettes have ticks next to their names
BulletNoTick.png invisible (hidden) palettes have no ticks next to their names
DotPoint2.JPG simply Left Click on the name of a hidden palette or on the BulletNoTick.png next to its name. This will add a BulletTick.png and make the palette visible
DotPoint3.JPG make sure that the Tool Options Palette is also visible

There is a Trainz Wiki Page specifically covering the S20 Palettes at
WikiLink.PNG How to Use the Surveyor 2.0 Palettes


The Brush Tool

SkipDown.png   Top Next Up Next Down Bottom


S20 BrushToolIcon.png Keyboard Shortcut:  W  The  Brush Tool  "paints" the ground height, ground textures, effect layers and scrapbook scenes in the Trainz World

The Brush Tool has two drop down menu lists.

Brush Tools
The first drop down menu will set the "Brush Target" which is the type of brush. Left Click on the drop down box and on a Target to select it:-
BulletTick.png Ground Height
BulletTick.png Ground Texture
BulletTick.png Scrapbook Data
BulletTick.png <List of Effect Layers>
BulletTick.png Edit Effect Layers
BrushToolsGroundOptions S20.png
NotePad.PNG If you have any Effect Layers then they will appear as Targets in this drop down list. Select an Effect Layer to use the brush to paint with that layer.


Ground Height

SkipDown.png SkipUp.png        
BlueDot10x10.png This Brush Target raises or lowers the Ground Surface Height by using a "painting" action
This brush tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.

When the  Ground Height  Target is selected, the second drop down box will give a choice of several brush actions that control how the height is adjusted.

The actions are:-
BulletTick.png Height Up
BulletTick.png Height Down
BulletTick.png Set Height
BulletTick.png Grade
BrushToolsHeightOptions S20.png
Ground Height Brush Actions:
 Height Up 
 Height Down 
raises/lowers the ground at a rate controlled by the Tool Options Palette  Sensitivity  setting
 
 Set Height  "plateaus" the ground to the Tool Options Palette  Height  setting at a rate controlled by the  Sensitivity  setting
 
 Grade  creates a smooth slope at the Tool Options Palette  Grade  and  Angle  settings at a rate controlled by the  Sensitivity  setting


PencilTips.PNG Tool Options Palette Controls
DotPoint.JPG The active ground height brush options for each action are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored by the selected action, but they can still be edited.
DotPoint.JPG Most of the data entry boxes in the Tool Options Palette have a Popup Menu (Right Click inside the box) that can be used to collect and distribute data - see the Wiki Page WikiLink.PNG How to Use the Surveyor 2.0 Palettes for more details.


 Height Up/Height Down 
Up/Down brush options
 Set Height 
Height brush options
 Grade 
Grade brush options
PencilTips.PNG On the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the value in smaller increments

 Radius  the brush radius (metres) - see Notes: below
Range:  5m and above
 Height  the brush height (metres) - see Tips: below
Range:  -3000m to +3000m
 Sensitivity  the rate at which the Height changes
Range:  1% (very slowly) to 100% (very quickly)
 Grade  slope gradient - see Notes: below
Range:  0% = flat ("Plateau" in Classic) to
  ±100% = steep (but not vertical)
 Angle  grade direction (compass degrees)
Range:  0° (North) to ±359°
a negative value reverses the grade direction


NotePad.PNG Notes:

DotPoint.JPG Unlike Surveyor Classic, there is no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. However, the performance will decrease as the brush radius increases. If you are using the brush to set an entire baseboard, or many baseboards, to a specific height then the Marquee Tool would be a better choice.
DotPoint.JPG The  Grade  is defined as vertical rise divided by horizontal distance converted to a percentage figure. So a grade of 100% (the maximum allowed) would mean a slope formed by the height and distance both being the same value (e.g. a height increase of 50m over a distance of 50m). A vertical slope (a cliff) would have an infinite grade which is currently impossible in Surveyor.


 Using the Ground Height 

Identifying the Ground Height

PencilTips.PNG You can copy the current Ground Height of any spot in the route to the Tool Options Palette  Height  setting. Once it has been copied the height can be applied to the Ground Height Brush or to any other object in the route. To copy the Ground Height choose one of the following:-
Options:
Ablue.png Using the Eyedropper option found in any brush tool
 
Steps:
DotPoint1.JPG move the mouse pointer onto the spot on the terrain
DotPoint2.JPG hold down the  Alt  key and Left Click
This option is a good choice when there are no scenery objects (e.g. vegetation, splines, buildings, etc) over the ground being sampled by the eyedropper.
Warning: This will switch the Brush Tool from Ground Height to Ground Texture for painting with the texture or grid pattern at the location clicked
OR
Bblue.png Using the  Height  setting and the compass
 
Steps:
DotPoint1.JPG Right Click onto the spot on the terrain to move the Compass
DotPoint2.JPG Right Click inside the  Height  setting entry box
DotPoint3.JPG Left Click on the menu option
 Get Height at Compass 
This option is recommended when there are scenery objects (e.g. vegetation, splines, buildings, etc) between the ground and the eyedropper - the object name shown in the eyedropper  Tooltip  is NOT the name of a ground texture or a grid pattern.
OR
Cblue.png Using the Compass and the Info Palette
 
Steps:
DotPoint1.JPG Right Click at the spot on the terrain to move the Compass
DotPoint2.JPG open the Focus controls in the Info Palette
DotPoint3.JPG Left Click the  z  control down arrowhead icon
DotPoint4.JPG select the menu option
 Use Height for Brush 
This option is also recommended when there are scenery objects (e.g. vegetation, splines, buildings, etc) between the ground and the eyedropper.


Painting the Ground Height

Steps: To set the Ground Surface Height:-
DotPoint1.JPG select the Brush Tool from the Tools Palette (or press the  W  key)
DotPoint2.JPG select the brush Target (in this case  Ground Height )
DotPoint3.JPG select the brush Action ( Height Up ,  Height Down , etc)
DotPoint4.JPG set any brush controls ( Radius , Height ,  Sensitivity , etc) in the Tool Options Palette
DotPoint5.JPG Left Click and Drag on the terrain to change the terrain height
PencilTips.PNG The rate or speed at which the ground height changes is controlled by the Tool Options Palette  Sensitivity  setting. Set its value to:-
DotPoint.JPG 1% for the smallest possible change with each sweep of the brush
DotPoint.JPG 100% for the largest possible change with each sweep of the brush
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


BlueDot10x10.png Most objects have a height value that can be set and altered using the objects Context Menu or through the Placement, Free Move and Fine Adjustment tools (see the sections below dealing with each of these tools for more details).
Object Context Menu Ground Height Options
Once an object has been placed you can open its Context Menu (Left Click on its icon or press the  T  key) to access a range of options and functions. The following specific Ground Height Options will appear, along with other more general options, in the objects Context Menu.
 Smooth Ground Under Selected  changes the height of the ground under the selected objects to match the set height of the objects. If multiple objects at different heights have been selected then the terrain height will be set to match, as far as possible, the height of each object. This option is frequently used to raise and smooth the ground under track splines.
 Settle on Ground  sets the height of the selected objects to match the height of the ground beneath them ("drops them back to earth")
 Apply Height  sets the height of the selected objects to the value in the Tool Options Palette  Height  setting


Ground Texture

SkipDown.png SkipUp.png        
BlueDot10x10.png This tool paints the currently selected Ground Texture (from the Assets Palette) on the ground
This brush tool uses the Tool Options Palette and the Assets Palette. If these palettes are not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.

When the  Ground Texture  Target is selected, the second drop down box will be disabled - there are no brush texture actions.

PencilTips.PNG Tool Options Palette Controls
DotPoint.JPG The active texture brush options are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored, but they can still be edited.
DotPoint.JPG Most of the data entry boxes in the Tool Options Palette have a Popup Menu (Right Click inside the box) that can be used to collect and distribute data - see the Wiki Page WikiLink.PNG How to Use the Surveyor 2.0 Palettes for more details.


Texture brush options
 Radius  the brush radius (metres) - see Notes: below
Range:  5m and above
 Sensitivity  texture transparency
Range:  1% = almost transparent to
  100% = solid (opaque)
 Rotation  initial rotation angle - see Notes: below
Range:  0° to ±360° (larger angles can be entered)
 Scale  the texture pattern scaling factor as a %
Range:  0.01% = smallest, 100% = full size, >100% larger than full size
NotePad.PNG The  Height  setting has no effect on textures as they are always painted on the existing ground surface.
PencilTips.PNG On the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the value in smaller increments


NotePad.PNG Notes:

DotPoint.JPG Unlike Surveyor Classic, there is no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. However, the performance will decrease as the brush radius increases. If you are using the brush to paint an entire baseboard, or many baseboards, then the Marquee Tool will be quicker but it will not give the options of changing the scale and rotation while painting the texture.
DotPoint.JPG The  Rotation  controls the starting angle for the texture when painting and is often used to avoid pattern repetition. As in Surveyor Classic, holding down the  [  or  ]  keys while painting will continuously change the rotation angle.


 Using the Ground Texture 

Identifying a Texture

PencilTips.PNG You can identify and select an existing Ground Texture to use elsewhere in the route
Steps: To identify a Ground Texture:-
DotPoint1.JPG Hold down the  Alt  key and move the pointer onto the texture to be selected. Its name will appear in the pointer  ToolTip 
DotPoint2.JPG While holding down the  Alt  key Left Click on the texture
  The texture will be selected in the Assets Palette and the Ground Texture target in the Brush Tool will be activated so you can immediately start painting with the texture using the current Tool Options Palette settings. This will also copy the Ground Height at the selected point into the Tool Options Palette  Height  setting


Painting a Texture

Steps: To paint a Ground Texture:-
DotPoint1.JPG select your Ground Texture in the Assets Palette - you can use the Assets Palette filter options to narrow down the selection
DotPoint2.JPG select the Brush Tool from the Tools Palette (or press the  W  key)
DotPoint3.JPG select the  Ground Texture  target from the Brush Tool drop down menu
DotPoint4.JPG set any brush controls ( Radius ,  Sensitivity ,  Rotation ,  Scale ) in the Tool Options Palette
DotPoint5.JPG Left Click and Drag on the terrain to paint with the texture
PencilTips.PNG The intensity at which the ground texture is painted is controlled by the Tool Options Palette  Sensitivity  setting. This allows you to paint over an existing texture (including the Grid pattern) in a way that will let most, some or none of the original texture show through. Set the  Sensitivity  value to:-
DotPoint.JPG 1% to make the new texture almost transparent. The level of transparency will decrease with each new brush sweep over the same area
DotPoint.JPG 50% to make the new texture 50% or semi-transparent
DotPoint.JPG 100% to make the new texture totally hide the original texture
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


BlueDot10x10.png Most objects can have a Ground Texture automatically painted beneath them.
Object Context Menu Ground Texture Option
Once an object has been placed you can open its Context Menu (Left Click on its icon or press the  T  key) to access a range of options and functions. The following specific Ground Texture Option will appear, along with other more general options, in the objects Context Menu.
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out. This option is frequently used to paint a texture under selected track (or other) splines.


 Default Baseboard Ground Texture 

When a new route is created or a new baseboard is added it will be covered with the ground texture for the selected Region or the default texture if no region has been set. This can be changed to a different texture (including to the standard TRS19/TRS22 grid pattern).
MainMenuSetGroundTexture.png
Steps: To disable the current default ground texture (easiest method):-
DotPoint1.JPG open the SurveyorDisplayIcon.png Surveyor Display Menu
DotPoint2.JPG select the  Ground  option
DotPoint3.JPG select the  Grid  sub-option. This will use the current grid texture.
A more complex solution is to edit an existing Region or create one of your own to add your preferred ground texture (such as the standard TRS22 grid pattern) to each new route you create and every new baseboard that you add.
NotePad.PNG Notes:

The Baseboard Ground Texture, chosen from the Surveyor Display Menu or by specifying a Region, will become the default for every new route you create and every new baseboard you add, until you change it to something else.


LinkWiki.PNG

Information on creating and editing Region assets can be found on the Trainz Wiki at:-

How to Create a Region Asset


Scrapbook Data

SkipDown.png SkipUp.png        
BlueDot10x10.png This tool paints the currently selected Scrapbook (from the Scrapbook Palette) on the ground
This brush tool uses both the Tool Options Palette and the Scrapbook Palette. If these palettes are not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


PencilTips.PNG A new scrapbook can be created by choosing one of the following:-

Options:

Ablue.png use the PageLink.PNG Marquee Tool to select an area of the route containing objects, OR
Bblue.png use the PageLink.PNG Free Move Tool or the PageLink.PNG Fine Adjustment Tool to select a group of individual objects for the scrapbook
In both cases once the area or objects have been selected use the Context Menu  Cut  (or press  Ctrl  +  X ) or  Copy  (or press  Ctrl  +  C ) options to place the objects into a new scrapbook. More detailed instructions on creating Scrapbooks can be found in the PageLink.PNG Marquee Tool section of this document.


NotePad.PNG Notes:

Scrapbooks, when created, will contain:-
DotPoint.JPG Ground Heights
DotPoint.JPG Ground Textures
DotPoint.JPG Effect Layers - if present
DotPoint.JPG Selected Objects - scenery items, splines, track, signals, etc
DotPoint.JPG But  NOT Rolling Stock (Trains) 
Ground heights, textures and effect layers are always included in a scrapbook but you can control which visible objects are added by manually selecting them
NotePad.PNG Notes:

Scrapbooks, when painted or pasted, can contain any combinations of:-
DotPoint.JPG Ground Heights
DotPoint.JPG Ground Textures
DotPoint.JPG Effect Layers
DotPoint.JPG Scenery Objects (Meshes) - individual buildings, trees, signals, etc
DotPoint.JPG Scenery Splines - roads, track, fences, etc
You have options in PageLink.PNG The Scrapbook Filters that will control which of these data categories are copied and how they are copied from the scrapbook into a route.


PencilTips.PNG
The current Scrapbook can be Pasted into a route at the position of the screen cursor (the Compass Rose) by choosing one of the following:-
Options:
Ablue.png press  Ctrl  +  V , OR
Bblue.png selecting  Paste  from the Context Menu of a selected object
In both cases the Scrapbook will be pasted using the original scrapbooks size. It will be pasted inside a Marquee Selection Area that can be moved and resized. The objects that are pasted and how they are pasted is controlled by the current Scrapbook Palette filter settings


 The Scrapbook Brush Actions 

When the  Scrapbook Data  Target is selected, the second drop down box will give a choice of two brush actions that control how the scrapbook is applied.

The actions are:-
BulletTick.png Scrapbook Brush
BulletTick.png Scrapbook Clone
BrushToolsScrapbookOptions S20.png
Scrapbook Brush Actions:
 Scrapbook Brush  will resize the scrapbook contents to fit the selected brush shape and size

 Scrapbook Clone  will paint the scrapbook sized according to the Tool Options Palette  Scale  setting. See Notes below


NotePad.PNG Notes:

 Scrapbook Brush  will resize the scrapbook contents to fit the selected brush shape and size.
DotPoint.JPG If the brush is small then the scrapbook contents will be compressed closer together
DotPoint.JPG If the brush is large then the contents will be spaced further apart
DotPoint.JPG Every Left Click will paste another complete scrapbook copy
DotPoint.JPG The  Scale  setting in the Tool Options Palette is ignored.
 Scrapbook Clone  will paste the scrapbook sized according to the  Scale  setting (100% = original size)
DotPoint.JPG If the brush is the same size as the scaled scrapbook then a single exact copy will be pasted
DotPoint.JPG If the brush is smaller than the scaled scrapbook in size then only the central part of the scrapbook will be revealed and more will be added when the brush is moved around until the "painted" area covers the same area as the scaled scrapbook. Further painting will clone or tile the scrapbook contents
DotPoint.JPG If the brush is larger than the scaled scrapbook in size then the contents will be cloned or tiled to fill the set brush radius
 
Stop.PNG WARNING:

Take care if setting both the  Scale  and the  Radius . Using extreme values for both, such as a very large brush radius and a very small scale value, can cause performance issues (i.e. long delays) while the program attempts to scale and clone the scrapbook contents


PencilTips.PNG Tool Options Palette Controls
DotPoint.JPG The active scrapbook brush options for each action are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored by the selected action, but they can still be edited.
DotPoint.JPG Most of the data entry boxes in the Tool Options Palette have a Popup Menu (Right Click inside the box) that can be used to collect and distribute data - see the Wiki Page WikiLink.PNG How to Use the Surveyor 2.0 Palettes for more details.


 Scrapbook Brush 
Brush options
 Scrapbook Clone 
Clone options

 Radius  the brush radius (metres) - see Notes: below
Range:  5m and above
 Sensitivity  if the  Ground Height  option has been enabled in the Scrapbook Palette filter settings, then this will set the rate or speed at which the ground height will change
Range:  1% = slowest, 100% = fastest
 Rotation  initial rotation angle (degrees) - see Notes: below
Range:  0° to ±360° (larger angles can be entered)
 Scale  the scrapbook scaling factor - see Notes: below
Range:  0.01% = smallest, 100% = full size, >100% larger than full size
 Shape  brush shape
Options:  BrushToolsScrapShapes S20.png  Circle  and  Square  will set the brush to the selected shape with the  Radius  setting the brush size
   Natural  will set the brush to the same shape as the Marquee that created the scrapbook, which may be rectangular. The  Radius  setting will scale the brush size
NotePad.PNG The  Height  setting has no effect on the Scrapbook. This feature is controlled by the Scrapbook Palette Filter  Ground Height  options.
PencilTips.PNG On the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the value in smaller increments


Painting with the Scrapbook

NotePad.PNG Notes:

DotPoint.JPG Unlike Surveyor Classic, there is no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. However, the performance will decrease as the brush radius increases.
DotPoint.JPG The  Rotation  controls the starting angle for pasting the scrapbook objects. In Surveyor Classic you could only rotate and paste in 90° increments. In S20 you can rotate and paste at any angle.
DotPoint.JPG The  Ground Height  options in the Scrapbook Filters control how the terrain heights in the Scrapbook are applied
DotPoint.JPG Setting extreme values for the  Scale  and the  Radius  when using the  Scrapbook Data Clone Brush  can cause performance issues (i.e. long delays) while the program attempts to scale and clone the scrapbook contents into the route
 
Steps: To "paint" with a Scrapbook asset:-
DotPoint1.JPG select the Brush Tool from the Tools Palette (or press the  W  key)
DotPoint2.JPG select the  Scrapbook Data  target from the Brush Tool first drop down menu
DotPoint3.JPG select a brush action ( Scrapbook Brush  or  Scrapbook Clone ) from the Brush Tool second drop down menu
DotPoint4.JPG select a Scrapbook asset to be painted (see the The Scrapbook Palette below)
DotPoint5.JPG open the Scrapbook Filter in the Scrapbook Palette and select the features to be pasted and their method of pasting (see The Scrapbook Filters below)
DotPoint6.JPG set any Brush controls (e.g.  Radius ) from the Tool Options Palette
DotPoint7.JPG Left Click or Left Click and Drag (depending on your brush settings) on the terrain to paint with the scrapbook asset


PencilTips.PNG If you have the  Ground Height  Scrapbook Filter Option set on then the rate or speed at which the ground height changes will be controlled by the Tool Options Palette  Sensitivity  setting. Set its value to:-
DotPoint.JPG 1% for the smallest possible change with each sweep of the brush
DotPoint.JPG 100% for the largest possible change with each sweep of the brush
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


 The Scrapbook Palette 

ScrapbookToolsTop S20.png
ScrapbookPinnedIcon S20.pngScrapbookUnPinnedIcon S20.png Left Click on the pin icon to Lock (blue pin) and Unlock (white pin) the scrapbook. Locked scrapbooks are permanent (but can still be deleted). Unlocked scrapbooks will "expire" (self delete) after 5 days
DeleteIcon S20.png Left Click on the delete icon to delete the current scrapbook - most scrapbooks can be deleted (see Notes: Deleting Built-in Scrapbooks below on how to deal with the exceptions to this)
ScrapbookThumbnail S20.png The thumbnail of the currently displayed scrapbook and the one that will be painted or pasted into the route
ScrapbookCounter S20.png Identifies the currently displayed scrapbook (the first number) and the total number of stored scrapbooks (the second number)
ScrapbookLeftRight S20.png Left Click on the  <  or  >  to move forwards or backwards through the stored scrapbooks to select the scrapbook that will be added to the route
  The scrapbook name can be edited. Left Click inside the name box to edit or replace the current name. Left Click on the image to make the name change permanent and pin (lock) the scrapbook (pressing the  Enter  key does not work - a known bug)


NotePad.PNG Notes: Deleting Built-in Scrapbooks

Some scrapbooks are installed with Trainz and cannot be deleted. These scrapbooks have the label Prefab at the front of their names (you may have to scroll to the front of the name to see it). While they cannot be deleted they can be "disabled" so that they won't appear as an installed scrapbook. Unlocking them will not cause them to "expire" - after 5 days they will just become locked again.
Steps: To disable built-in scrapbooks
DotPoint1.JPG Open Content Manager and locate the "permanent" scrapbook or scrapbooks.
Search Tips: Name: starts with "Prefab"; Status: is Built-in; Type: is Misc
DotPoint2.JPG Highlight (select) the scrapbook assets individually or as a group
DotPoint3.JPG Open the Content menu and select the  Disable  option
You can reverse this and enable any or all of these scrapbooks at any time if you need them.


 The Scrapbook Filters 

BlueDot10x10.png The filters control which elements in the scrapbook are added to the route and how they are added.
Steps: To Open the Scrapbook Filters
DotPoint1.JPG Left Click on the arrowhead next to the  Filters:  label below the scrapbook image to open the scrapbook filters.


ScrapbookToolsBottom S20.png


PencilTips.PNG Sample Filter Settings:-
You can vary the appearance of the scrapbook when added to a route by painting or pasting it with different filter combinations. For example:-
 Ground Height:   None  ground height data will not be pasted and the ground heights already in the target area will be used
 Ground Texture:  Overwrite  textures present in the scrapbook will replace those already in the target area
 Meshes:  Add  scenery objects in the scrapbook will be added to those already in the target area
 Splines:  Add  scenery splines in the scrapbook will be added to those already in the target area
 Effect Layers:   None  effect layers in the scrapbook will not be pasted and any already in the target area will be used
PencilTips.PNG You can also add more variety when painting a Scrapbook by changing its Tool Options Palette  Scale  and  Rotation  settings in combination with different Filter selections (as shown above)
 Scrapbook Painting/Pasting Options 
 What Data to Transfer 
    Ground Height  terrain height(s) used in the scrapbook
    Texture  textures used in the scrapbook
    Meshes  scenery objects (e.g. trees, buildings) used in the scrapbook
    Splines  spline objects used in the scrapbook
    Effect Layers  effect layers (TurfFX, Clutter, Water Layer) used in the scrapbook
 How to Transfer the Data
    None  do not paste/paint this feature
    Add  add this feature to those already present
    Overwrite  use this feature to replace those already present
For the Ground Height:-
    None  do not paste/paint the scrapbook ground heights, use the existing ground heights instead
    Absolute  use the ground heights in the scrapbook to replace the existing ground heights
    Relative  use the difference between the existing ground heights and those used in the scrapbook


Effect Layers

SkipDown.png SkipUp.png        
BlueDot10x10.png This tool paints a selected Effect Layer onto the ground surface
BlueDot10x10.png If the route has Effect Layers installed then they will be listed individually as additional Targets otherwise an existing layer can be added as a new target from the Assets Palette or a new layer created using the Edit Effect Layers brush
This brush tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


BrushToolsPresets S20.png
Step: To select an Effect Layer as the brush tool:-
DotPoint1.JPG Left Click on an Effect Layer name in the Brush Target List and immediately start painting with the brush using the current Tool Options Palette settings. More details are shown below.


NotePad.PNG Notes:

DotPoint.JPG Effect Layers are created using the Edit Effect Layers options found in both the SurveyorEditIcon.png Surveyor Edit Menu at the top of the screen and also in the Brush Tools drop down list. They can also be loaded from .CDP files and installed from the Download Station (DLS).
DotPoint.JPG Once installed or created, Effect Layers can be added to a route as presets using either of the Edit Effect Layers options.


AssetsPaletteEffectLayers S20.png
PencilTips.PNG You can also select an Effect Layer from the Assets Palette filter list. This will also add the Effect Layer into the Brush Target List.


Step: To select an Effect Layer as the brush tool:-
DotPoint1.JPG Left Click on an effect layer name in the Layers Palette and immediately start painting using the current Brush Tool Options Palette settings. More details are shown below.

 Effect Layer Tool Options 

PencilTips.PNG Tool Options Palette Controls
DotPoint.JPG The active effect layer brush options for each action are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored by the selected action, but they can still be edited.
DotPoint.JPG Most of the data entry boxes in the Tool Options Palette have a Popup Menu (Right Click inside the box) that can be used to collect and distribute data - see the Wiki Page WikiLink.PNG How to Use the Surveyor 2.0 Palettes for more details.


 TurfFX and Clutter 
BrushToolsEffectLayer S20.png
 Water 
BrushToolsWaterLayer S20.png
 Radius  the brush radius (metres) - see Notes: below
Range:  see Notes: below
 Height  the water layer height (metres)
Range:  -3000m to +3000m
 Sensitivity  the rate at which the Intensity (TurfFX, Clutter) or Height (Water) setting changes
Range:  1% (very slowly) to 100% (very quickly)
 Intensity  effect density or coverage within the brush
Range:  1% (almost none) to 100% (maximum)
 Grade  Water Effect Layer slope gradient
Range:  0% (flat) to 100% (steep but not vertical)
 Angle  Water Effect Layer grade direction (compass degrees)
Range:  0° (North) to ±359°
a negative value reverses the grade direction
PencilTips.PNG On the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the value in smaller increments
NotePad.PNG The  Height  setting is ignored for TurfFX and Clutter because these effect layers will be painted at the existing ground surface height.


NotePad.PNG Notes:

DotPoint.JPG Unlike Surveyor Classic, there is no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. However, the performance will decrease as the brush radius increases
DotPoint.JPG The minimum brush  Radius  will depend on the configuration settings (asset density, resources used, etc) of the Effect Layer that is being painted. If the  Radius  setting is below the minimum for the selected Effect Layer then the brush circle will turn red and it will not paint


 TurfFX and Clutter Effect Layers 

When a TurfFX or Clutter Effect Layer has been selected as the Target, the second drop down box will give a choice of three actions.
The actions are very similar to those found in the  Ground Height  Target:-
BulletTick.png Increase
BulletTick.png Decrease
BulletTick.png Set Intensity
EffectLayerActions S20.png
TurfFX and Clutter Effect Layer Actions:
 Increase  increases the Tool Options Palette  Intensity  of the effect layer at a rate controlled by the  Sensitivity  setting, upto a maximum of 100%. Each time the brush is moved over the same area the Intensity or Density of the effect layer is increased
 
 Decrease  decreases the Tool Options Palette  Intensity  of the effect layer at a rate controlled by the  Sensitivity  setting. Each time the brush is moved over the same area the Intensity or Density of the effect layer is decreased
 
 Set Intensity  will paint the effect layer in one sweep using the full Tool Options Palette  Intensity  setting


Steps: To paint with a TurfFX or Clutter Effect Layer
DotPoint1.JPG select the Brush Tool from the Tools Palette (or press the  W  key)
DotPoint2.JPG select the <Turfx effect layer name> or the <Clutter effect layer name> from the Brush Target drop down menu. If there are no TurfFX/Clutter Effect Layers listed then none have been created or installed for this route
DotPoint3.JPG select a Brush action from the second drop down list ( Increase ,  Decrease  or  Set Intensity )
DotPoint4.JPG set any required Brush settings -  Radius ,  Intensity  and  Sensitivity  - from the Tool Options Palette
DotPoint5.JPG Left Click or Left Click and Drag on the terrain to paint with the Effect Layer
PencilTips.PNG The density or coverage of the TurfFX or Clutter ground effect within the brush area is controlled by the Tool Options Palette  Intensity  setting. Set this value to:-
DotPoint.JPG 1% to apply the effect very lightly
DotPoint.JPG 100% to apply the effect at full density
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


PencilTips.PNG The rate or speed at which the TurfFX and Clutter ground effects change when using the Effect Layer  Increase  or  Decrease  brush action settings is controlled by the Tool Options Palette  Sensitivity  setting. Set this value to:-
DotPoint.JPG 1% to increase/decrease the application of the ground effect very slowly
DotPoint.JPG 100% to increase/decrease the application of the ground effect at the maximum possible rate
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


NotePad.PNG Notes: "Floating Turf"
When painting with a TurfFX Effect Layer or a Clutter Effect Layer brush, care must be taken when near the edge of the route. Painting over the edge will create "floating" effect layer artifacts. This can occur in both Surveyor 2.0 and Surveyor Classic.
EffectLayerHeightArtifact.png In the image on the left, a TurfFX Effect Layer brush has been used near the boundary of the route. Some of the brush has strayed over that boundary edge into the empty space beyond.

The result is a "floating" section of TurfFX or Clutter hovering "off the grid" and sometimes high above the terrain, as shown in the image. The height of the floating region will depend on the ground surface height, the World Origin height and other mysterious factors.

The Solution: (The Lawn Mower)

Steps: To remove "floating" TurFX and Clutter:-
DotPoint1.JPG Set the Effect Brush Tool action to  Decrease 
DotPoint2.JPG Set both the  Intensity  and  Sensitivity  settings in the Tool Options Palette to 100%
DotPoint3.JPG Using the same Effect Layer that created the problem, repaint over the floating Effect Layer areas. This will also remove some of the effect layer from the edges of the boundary baseboards.


Prevention:
DO NOT paint TurfFX and Clutter Effect Layers right up to the edges of boundary baseboards


 Water Effect Layer 

BlueDot10x10.png A Water Effect Layer will cover the entire route. Use the Ground Height Brush to raise or lower the ground to hide and reveal the water where required


When a Water Effect Layer has been selected as theTarget, the second drop down box will give a choice of five actions.
The actions are identical to those found in the  Ground Height  Target plus a new action:-
BulletTick.png Height Up
BulletTick.png Height Down
BulletTick.png Set Height
BulletTick.png Grade
BulletTick.png Bulk Adjust
BrushToolsWaterEffect S20.png
Water Effect Layer Actions:
 Height Up 
 Height Down 
raises/lowers the water layer at a rate controlled by the Tool Options Palette  Sensitivity  setting
 
 Set Height  will "plateau" the water level to the Tool Options Palette  Height  setting at a rate controlled by the  Sensitivity  setting
 
 Grade  creates a smooth water slope at the Tool Options Palette  Grade  and  Angle  settings at a rate controlled by the  Sensitivity  setting - see Notes: below
 
 Bulk Adjust  will move the entire water layer up or down - see Notes: below


Steps: To paint with a Water Effect Layer
DotPoint1.JPG select the Brush Tool from the Tools Palette (or press the  W  key)
DotPoint2.JPG select the <water effect layer name> from the Brush Target drop down menu. If there are no Water Effect Layers listed then none have been created or installed for this route
DotPoint3.JPG select a Brush action from the second drop down list ( Height Up ,  Height Down ,  Set Height ,  Grade  or  Set Bulk Adjust )
DotPoint4.JPG set any required Brush settings -  Radius ,  Height ,  Sensitivity ,  Grade  and  Angle  - from the Tool Options Palette
DotPoint5.JPG Left Click or Left Click and Drag on the terrain to paint with the Effect Layer
PencilTips.PNG The rate or speed at which the water layer height changes is controlled by the Tool Options Palette  Sensitivity  setting. Set this value to:-
DotPoint.JPG 1% for the smallest possible change with each sweep of the brush
DotPoint.JPG 100% for the largest possible change with each sweep of the brush
Values between these two limits will give intermediate changes with each sweep of the brush over the same area


PencilTips.PNG Water Laying:
DotPoint.JPG To create a flat water layer use  Set Height  rather than  Height Up/Height Down  and set the Tool Options Palette  Sensitivity  to 100%
DotPoint.JPG The  Grade  action can be used to create a river that slowly (or rapidly) falls over a set distance


NotePad.PNG Notes:

DotPoint.JPG It is NOT recommended that you use both Water Effect Layers and the original Legacy Water in the same route. Use one or the other but, where possible, avoid using both.
DotPoint.JPG The  Grade  setting is the vertical rise divided by horizontal distance converted to a percentage figure. So a grade of 100% (the maximum allowed) would mean a slope formed by the height and distance both being the same value (e.g. a height increase of 50m over a distance of 50m). A vertical slope (e.g. a waterfall) would have an infinite grade which is currently impossible in Surveyor.
DotPoint.JPG The  Bulk Adjust  action is not fully intuitive and will require some experimentation. It will raise and lower the water effect layer in the baseboard where the Left Click and Drag was executed. Areas within that baseboard where the water effect layer had previously been set to a different height will not be affected until the water level reaches the same height. The Water Effect Layer in surrounding baseboards will also start to move when the level reaches their current heights.


Edit Effect Layers...

SkipDown.png SkipUp.png        

When this Target is selected, the Edit Effect Layer dialogue box will appear. This is the same as selecting  Edit Effect Layers ...  from the SurveyorEditIcon.png Surveyor Edit Menu.

Open effect layers Options:

Ablue.png If no Effect Layers are present then you can create a new one

New effect layer

Bblue.png If Effect Layers are present then select one to edit

Edit effect layers


PencilTips.PNG Effect Layers are created for each route. You can select and edit a previously saved Effect Layer rather than having to recreate the entire effect each time.


LinkWiki.PNG

More information on creating and editing Effect Layers can be found on the Trainz Wiki at:-

TurfFX_Effect_Layer
Clutter_Effect_Layer
Water_Effect_Layer


The Placement Tool

SkipDown.png SkipUp.png Top Next Up Next Down Bottom


S20 PlacementToolIcon.png Keyboard Shortcut:  E  The  Placement Tool  adds objects to a Trainz World
This tool uses the Tool Options Palette and the Assets Palette. If these palettes are not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


PencilTips.PNG When selected, this tool has a distinctive pointer icon which makes it easier to identify that the Placement Tool is active PlacementToolPointer S20.png


The Placement Tool has no drop down menu lists.

Placement Tools
PencilTips.PNG More Placement Options
After an object has been placed in a route its position and/or height can be changed by choosing one of the following:-
Options:
Ablue.png using the PageLink.PNG Free Move Tool OR
Bblue.png using the PageLink.PNG Fine Adjustment Tool OR
Cblue.png editing its  x   y   z  settings in PageLink.PNG The Info Palette OR
Dblue.png selecting the  Apply Height  option in its Context Menu


Placing a Scenery Mesh Object

SkipDown.png SkipUp.png        

 Adding a Scenery Mesh Object 

BlueDot10x10.png Individual "non-spline" scenery objects that are not attached to track are often referred to in Trainz terminology as Scenery Mesh Objects.
Steps: To add a Scenery Mesh Object the first step is to identify the exact asset you want to add. Steps DotPoint1.JPG, DotPoint2.JPG and DotPoint3.JPG are common to placing ALL types of objects but the selection of the object in step DotPoint1.JPG will change for different types of objects.


DotPoint1.JPG In the Asset Palette choose one of the following:-

Options:
Left Click on an asset selection icon

Filter Icons

GroundTextureFilter S20.png all ground textures
SceneryMeshFilter S20.png all non-spline scenery assets
ScenerySplineFilter S20.png all spline scenery assets
TrackSplineFilter S20.png all track spline assets
TrackMeshFilter S20.png all track (non spline) assets (signals, etc)
TrainFilter S20.png all rolling stock assets
PresetFilter S20.png all Effect Layer presets
OR
Left Click the Content Drop-down Box

Filter List
Then select Scenery Objects
Scenery Objects

OR
PencilTips.PNG  Shortcut 
Steps: If you already have the same object placed in your route then:-
DotPoint1RedC.png move the tool pointer over the object to be selected and hold down the  Alt  key. The object name will appear in a  ToolTip  attached to the pointer
DotPoint2RedC.png while holding down the  Alt  key Left Click on the object to identify it in the Assets Palette and automatically select it for placement with the Placement Tool. Release the key
Jump to Step DotPoint4.JPG below (for a Scenery Mesh Object) or to Step DotPoint4.JPG in one of the sections below (for a different type of object).
DotPoint2.JPG Optional: To narrow down the filter list type part of the object name into the Search Text Box. For example if you have selected Scenery Objects and want to find "barns", then type "barn" (UPPER/lower case does not matter).
Text search This will list all the Scenery Objects containing the text "barn" in their name or description.
Filtered list DotPoint3.JPG Left Click on the required item in the list.

When selected the object will be highlighted on a blue background and its name will appear in the Assets Palette title bar.

PencilTips.PNG
If you are not certain that a selected asset is the right one then try the following:-
Options:
Ablue.png Double Left Click on the name in the Asset List to bring up its image and description, OR
Bblue.png view its rotating and resizeable 3D image in the Preview Palette, OR
Cblue.png switch the asset list to Thumbnail View (Left Click the AssetsPaletteListToggleViewIcon S20.png icon). In this view the palette is best used undocked and enlarged - see the Wiki Page at WikiLink.PNG How to Use the Surveyor 2.0 Palettes for instructions on undocking and enlarging palettes.


PencilTips.PNG A Left Click on an object in the Assets Palette filter list will automatically activate the Placement Tool so the next Left Click in the route will place that object in the route.


DotPoint4.JPG The final step is to place the selected object into the route.


Steps:
DotPoint1RedC.png if the Placement Tool is not selected then Left Click on its Tools Palette icon S20 PlacementToolIcon.png or press the  E  key
DotPoint2RedC.png Left Click on the spot where you want to place the object
NotePad.PNG Notes:

DotPoint.JPG the Placement Tool will remain on and active until another tool has been selected. So everytime you Left Click another copy of the object (or another object if you change your selection) will be added to the route
DotPoint.JPG the last object placed will be highlighted (covered in "green/yellow"). This will be the selected object if you switch control to the Free Move Tool or the Fine Adjustment Tool


 Moving a Scenery Mesh Object 

PencilTips.PNG To move a scenery mesh object  DO NOT  click on it with the Placement Tool as this will just add another object


To move most scenery mesh objects you must switch to either the PageLink.PNG The Free Move Tool OR the PageLink.PNG The Fine Ajustment Tool. Track Objects and Rolling Stock Objects are exceptions and can be moved using the Placement Tool - see their sections below for more details


 Deleting a Scenery Mesh Object 

To delete a scenery mesh object (or any object) that has just been added by the Placement Tool and is still highlighted, choose one of the following:-
Options:
Ablue.png press the  Delete  key, OR
Bblue.png open its Context Menu (Left Click on its icon or press the  T  key) and select the option  Delete 
NotePad.PNG If the object is not highlighted then you must first switch to either the Free Move Tool or the Fine Ajustment Tool, select the object and then choose one of the above options


 Set the Height of a Scenery Mesh Object 

BlueDot10x10.png An object that has just been added to a route using the Placement Tool can have its height adjusted immediately after placement
BlueDot10x10.png or it can be adjusted at a later time using the Free Move or Fine Adjustment Tools


Copying an Objects Height

PencilTips.PNG You can copy the height of a selected scenery mesh object (e.g. a house) into the Tool Options Palette  Height  setting while the Placement Tool is still active. Once it has been copied it can be applied to any other object.
 
Steps: To copy the height of any selected object into the  Height  setting:-
DotPoint1.JPG Right Click in the  Height  setting in the Tool Options Palette
DotPoint2.JPG select the  Get Height from Selection  option


Setting an Objects Height
In Surveyor 2.0 track objects as well as scenery mesh objects can be given a height - in the case of track objects the height is above (or below) the track.

PlacementMeshHeight0 S20.png PlacementMeshHeight3 S20.png
To set the height of a selected scenery or track mesh object, choose one of the following:-
Options:
Ablue.png in the Tool Options Palette  Height  setting, enter a value followed by the  Enter  key OR
Bblue.png in the Tool Options Palette  Height  setting, enter a value then Right Click and select  Set Height to Selection  OR
Cblue.png from the objects Context Menu select the  Apply Height  option to apply an existing height setting, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).
The object will be moved to the set height above (or below) the terrain or track. The vertical yellow line shown in the second image on the left indicates the height change. The small yellow dot at the base of the line is the terrain or track attachment point for the object.


 Scenery Mesh Object Context Menu 

Scenery Mesh Object Context Menu Options

Once a scenery mesh object has been placed you can open its Context Menu (Left Click on its icon or press the  T  key) to access a range of options and functions. The following specific options will appear, along with other more general options, in the objects Context Menu.


 Apply Height  sets the height of the selected objects to the value in the Tool Options Palette  Height  setting
 Reset Object Rotation  resets the rotation angle of the selected objects to their default values
 Randomise Object Rotation  applies a random rotation angle to each selected object around its vertical axis
See PageLink.PNG Mesh Object Context Menu for the full list of Context Menu options for Scenery Mesh Objects.


Placing a Scenery or Track Spline

SkipDown.png SkipUp.png        

 Adding a Spline Object 

BlueDot10x10.png Scenery splines and track splines are defined by their endpoints. Splines are usually added to a route as a series of joined segments linked at the endpoints.


Steps: Start the process by identifying and selecting the exact track or scenery spline asset that you need from the Assets Palette

DotPoint1.JPG In the Asset Palette choose one of the following:-

Options:
Select from the Assets Palette icons:-
ScenerySplineFilter S20.png spline scenery assets OR TrackSplineFilter S20.png track spline assets
OR
Select from the Assets Palette drop down list:-
 Scenery Splines  OR  Track 


Select the spline asset to be added using Steps DotPoint2.JPG and DotPoint3.JPG, or the  Shortcut , as described in PageLink.PNG Placing a Scenery Mesh Object above.

Then continue as shown below:-
PlacementTrack1 S20.png DotPoint4.JPG Left Click on the spot where the spline will start. This will place the start or first endpoint of the spline.
DotPoint5.JPG Move the mouse in the direction you want to lay the spline or track. The spline will follow the mouse wherever you move it.
PlacementTrack2 S20.png DotPoint6.JPG When you have the tool pointer in the final position for the first spline segment, Left Click again. This will anchor the second spline endpoint. The spline between the two endpoints is the first spline segment.


The spline segment will now have three Context Icons, one for each endpoint (SplineEndPointContextIcon S20.png) and one for the spline segment (SplineSegmentContextIcon S20.png or TrackContextIcon S20.png depending on the type of spline).

PencilTips.PNG Different context menu options are provided depending on which icon you Left Click on
PlacementTrack3 S20.png DotPoint7.JPG Left Click on the new endpoint and move the mouse in the direction you want to continue laying the spline or track. The spline will follow the mouse wherever you move it.
NotePad.PNG Notes: Curves for Trainz Geeks

Splines and track splines are created and stored using Bezier Curves, a mathematical formula commonly used for curves in computer graphics. Each spline segment, curved or straight, is described using just 4 points regardless of its length and complexity. This gives significant savings in storage and processing. Unfortunately, real world curves are rarely described by simple Bezier Curves. This can sometimes create difficulties when modelling curves from the real world so approximations often have to be used in the Trainz World.
PlacementTrack4 S20.png DotPoint8.JPG When you have the tool pointer in the final position for the second spline segment, Left Click again. This will anchor the third spline endpoint and the Context Icons will move to the new segment.
NotePad.PNG Notes: Adding a Junction

To add a junction to a spline segment Left Click on it with the Placement Tool at the point where you want to insert the junction, this does not have to be an endpoint, then move the pointer out from the junction. See PageLink.PNG Adding a Spline Junction below
Repeat Steps DotPoint7.JPG and DotPoint8.JPG above to continue laying the spline.


 Moving a Spline Object 

NotePad.PNG Notes:

To move a spline segment or endpoint  DO NOT  click on it with the Placement Tool as this will insert a junction.


Steps: To move a spline segment or endpoint
DotPoint1.JPG Select the Free Move Tool (or press the  S  key) or the Fine Adjustment Tool (or press the  D  key)
DotPoint2.JPG Select the spline segment or endpoint. To select multiple spline segments use  Shift  + Left Click to select each segment
DotPoint3.JPG Drag the selected element(s) in the required direction
For more information see the sections PageLink.PNG Free Move: Spline Objects or PageLink.PNG Fine Adjustment: Spline Objects


 Deleting a Spline Object 

To delete a spline object (or any object) that has just been added by the Placement Tool and is still highlighted, choose one of the following:-
Options:
Ablue.png press the  Delete  key, OR
Bblue.png open its Context Menu (Left Click on its icon or press the  T  key) and select the option  Delete 
NotePad.PNG If the object is not highlighted then you must first switch to either the Free Move Tool or the Fine Ajustment Tool, select the object and then choose one of the above options


 Adding a Spline Junction 

BlueDot10x10.png A junction is formed when three spline segments are joined at an endpoint. Junctions can be formed using non identical but compatible spline objects, such as different types of track splines.


SplineJunction S20.png
Steps: To add a junction to a spline object:-
DotPoint1.JPG Select the spline object to be used for the junction. The easiest method is hold down the  Alt  key and Left Click on an existing spline object that you want to use. This will also select the Placement Tool in Step  2  below so you can skip to Step  3 
DotPoint2.JPG Select the Placement Tool from the Tools Palette
DotPoint3.JPG Left Click on the spline at the spot where the junction is to be created. This can be on an existing endpoint or between two endpoints where a new endpoint will be inserted
DotPoint4.JPG move the mouse pointer out from the junction to where the next endpoint of the spline branch will be placed and Left Click


Steps: To remove a junction but keep all its spline segments:-
DotPoint1.JPG open the junction endpoint Context Menu by a Left Click on its Context Icon SplineEndPointContextIcon S20.png
DotPoint2.JPG select the  Separate Splines  menu option (this will separate ALL the spline segments that meet at that endpoint)
NotePad.PNG
DotPoint.JPG A junction can be removed by deleting any spline segment that connects to it
DotPoint.JPG A junction endpoint can be moved by using the Free Move Tool or the Fine Adjustment Tool


 Track Spline Junctions 

BlueDot10x10.png A track junction is formed using track splines in the same way as described above but track junctions have additional features


PlacementTrackJunction S20.png
When a junction is created using Track Spline Objects, a junction switch will be automatically added.
DotPoint.JPG the switch will be the one specified in the Region listed in the Route Properties. The region and its switch can be changed by opening the SurveyorEditIcon.png Surveyor Edit Menu and selecting  Edit Route... . If no region has been specified then a default switch (as shown left) will be used
DotPoint.JPG use the PageLink.PNG Free Move Tool or the PageLink.PNG Fine Adjustment Tool to move or delete the switch and to open its Context Menu for editing


LinkWiki.PNG

Information on creating and editing a Region can be found on the Trainz Wiki at:-

How to Create a Region Asset


PencilTips.PNG Using Procedural Tracks
If the track object used is a Procedural Track then the junction endpoint dot will be coloured:-
DotPoint.JPG RED (as shown above) if the junction exceeds the maximum allowed values for a procedural junction, OR
DotPointBlack.JPG BLACK if the junction is within the maximum allowed values for a procedural junction
See the Wiki Page WikiLink.PNG How to Use Procedural Track for more details


 Spline Object Context Menu 

Spline Object Context Menu Options

Once a spline object has been placed you can open one of its three Context Menus - one menu for the spline segment, SplineSegmentContextIcon S20.png or TrackContextIcon S20.png, and one for each of the two endpoints SplineEndPointContextIcon S20.png. Left Click on one of the icons or press the  T  key to access a range of options and functions available in the Context Menu. The following specific options will appear, along with other more general options, in the objects Context Menu. The Context Menu shown will depend on whether a segment SplineSegmentContextIcon S20.pngTrackContextIcon S20.png or an endpoint SplineEndPointContextIcon S20.png was selected.


 Straighten Spline  forces a straight line (as far as possible) between the endpoints of a single segment. This option will be Tick.PNG ticked if the segment has already been straightened in which case selecting this option will "un-straighten" the segment and remove the tick
 Separate Splines  breaks two spline segments into two separate (independent) splines at the selected endpoint
 Merge Splines  removes the selected endpoint between two segments and merges the segments into one. Two segments can also be merged by deleting a selected endpoint with the  Delete  key
 Insert Spline Point Here  inserts a new endpoint in a segment at the point where it was clicked. This will create a new segment at the endpoint
See PageLink.PNG Spline Object Context Menu for the full list of Context Menu options for Spline Objects.


 Spline Heights with the Placement Tool 

Copying a Spline Objects Height

PencilTips.PNG You can copy the height of a spline segment into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper to copy the height of any spline segment
Steps: To copy the Height of a spline segment:-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto any spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG This will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
If the segment has a slope then the height at the point clicked will be copied into the  Height  setting and the spline gradient will be copied into the  Grade  setting.
  OR
Bblue.png Use the  Height  setting drop down menu
Steps: To copy the Height of the currently active (just placed) spline segment:-
DotPoint1.JPG Right Click in the Tool Options Palette  Height  setting box
DotPoint2.JPG Select the  Get Height from Selection  option

If the spline segment has a slope then the height at its midpoint will be used

When you start adding a spline to a route it will always be placed at the height of the terrain regardless of the Tool Options Palette  Height  setting.

However, you can set the heights of any selected segment or endpoint.
Setting a Spline Objects Height

To set the height of a selected spline (including track) or endpoint, choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key, OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Cblue.png from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) the  Apply Height  option, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


 Spline Gradients with the Placement Tool 

NotePad.PNG Notes:

  The  Grade  is defined as vertical rise divided by horizontal distance converted to a percentage figure. So a grade of 100% (the maximum allowed) would mean a gradient formed by both measurements having the same value (e.g. a rise of 50m over a distance of 50m). A vertical grade (such as up a cliff face) would have an infinite grade which is currently impossible in Surveyor.


Copying a Spline Objects Gradient

PencilTips.PNG You can copy the grade of a spline segment into the Tool Options Palette  Grade  setting. Once it has been copied it can be applied to any other object. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper to copy the grade of any spline segment
Steps: To copy the Grade of a spline segment:-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto any spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG This will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
This will also copy the height of the segment at the point it was clicked into the  Height  setting
  OR
Bblue.png Use the  Grade  setting drop down menu
Steps: To copy the Grade of the currently active (just placed) spline segment:-
DotPoint1.JPG Right Click in the Tool Options Palette  Grade  setting box
DotPoint2.JPG Select the  Get Grade from Selection  option


Setting a Spline Objects Gradient

To set the gradient of a selected spline segment (including track) after it has been laid by the Placement Tool, choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Grade  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Grade  icon is not coloured  Gold . OR
Bblue.png select the  Apply Grade to this Spline Endpoint  option from the Context Menu for the segment endpoint (not the segment context icon) - Left Click on the endpoint Context Icon SplineEndPointContextIcon S20.png to apply the existing grade value. The endpoint that has been selected will be the starting point of the grade.
PencilTips.PNG You can lay a spline object without any applied gradient so that it will follow the existing terrain height. Simply delete its  Grade  value so it resets to the default  -  character


 Track Condition Setting 

PlacementSplineTools S20.png

The Tool Options Palette has a Condition setting that only applies to track spline segments. This can be set for a segment that has just been added and is still highlighted.

 Condition  this applies to Track Spline objects and sets the track condition (or "ride comfort") for each segment
Range:  1% (terrible track condition) to 100% (perfect track condition)
PencilTips.PNGThe Track Condition can also be set for each track segment in its Context Menu  Edit Properties  option


If the track segment is not highlighted you must switch to the Free Move Tool or the Fine Ajustment Tool and then select the segment.

Steps: To set a track condition:-
DotPoint1.JPG Enter a value from 1 to 100 in the Tool Options Palette  Condition  setting
DotPoint2.JPG Press the  Enter  key


Placing Track Objects

SkipDown.png SkipUp.png        

 Adding a Track Object 

BlueDot10x10.png Track Objects (e.g. signals, speed signs, switches, etc), both visible and invisible, can only be attached to track splines.
NotePad.PNG Notes:

Visible examples of track objects include:-
DotPoint.JPG Signals, speed signs, end buffers, switches
Invisible examples of track objects include:-
DotPoint.JPG Trackmarks, triggers, direction and priority markers


Steps: Start the process by identifying and selecting the track asset that you need from the Assets Palette

DotPoint1.JPG In the Asset Palette choose one of the following:-

Options:
Select from the Assets Palette icons:-
TrackMeshFilter S20.png track (non spline) assets
OR
Select from the Assets Palette drop down list:-
 Track Objects 


Select the track asset to be added using Steps DotPoint2.JPG and DotPoint3.JPG, or the  Shortcut , as described in PageLink.PNG Placing a Scenery Mesh Object above.

Then continue as shown below:-
PlacementTrackObject S20.png
DotPoint4.JPG Left Click on the track at the position where you want the Track Object to be placed.


 Moving a Track Object 

BlueDot10x10.png Once a Track Object (e.g. a signal) has been placed it can be moved using the Placement Tool


Steps: To move a Track Object using the Placement Tool:-
DotPoint1.JPG Left Click and Drag the Anchor Point (the small yellow dot in the middle of the track as shown in the image above) to any position along the track or to another track.


PencilTips.PNG Moving Track Objects can also be performed, with more control and additional options, using the Free Move Tool or the Fine Adjustment Tool.


 Deleting a Track Object 

To delete a track object (or any object) that has just been added by the Placement Tool and is still highlighted, choose one of the following:-
Options:
Ablue.png press the  Delete  key, OR
Bblue.png open its Context Menu (Left Click on its icon or press the  T  key) and select the option  Delete 
NotePad.PNG If the object is not highlighted then you must first switch to either the Free Move Tool or the Fine Ajustment Tool, select the object and then choose one of the above options


 Set the Height of a Track Object 

BlueDot10x10.png An object that has just been added to a route using the Placement Tool can have its height adjusted immediately after placement
BlueDot10x10.png or it can be adjusted at a later time using the Free Move or Fine Adjustment Tools


In Surveyor 2.0 track objects can be given a height that will place them above (or below) the track.

To set the height of a selected scenery or track mesh object, choose one of the following:-
Options:
Ablue.png in the Tool Options Palette  Height  setting, enter a value followed by the  Enter  key OR
Bblue.png in the Tool Options Palette  Height  setting, enter a value then Right Click and select  Set Height to Selection  OR
Cblue.png from the objects Context Menu select the  Apply Height  option to apply an existing height setting, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


 Track Object Context Menu 

Track Mesh Object Context Menu Options
Once a track mesh object has been placed you can open its Context Menu (Left Click on its icon or press the  T  key) to access a range of options and functions. The following Track Object specific options will appear, along with other more general options, in the objects Context Menu.
 Rotate Trackside  swaps the position of the object to the other side of the track so that it faces the opposite direction
 Change Junction Direction  if the object is a track switch or junction then its switch direction will be reversed
 Reattach to Track  if the object has been moved away from the track then it will be reset to its correct position on the track
See PageLink.PNG Track Object Context Menu for the full list of Context Menu options for Track Objects.


Placing Rolling Stock Objects

SkipDown.png SkipUp.png        

 Adding a Rolling Stock Object 

BlueDot10x10.png Rolling Stock Objects (e.g. locomotives, passenger cars and wagons) can only be attached to track splines.


Steps: Start the process by identifying and selecting the rolling stock asset that you need from the Assets Palette

DotPoint1.JPG In the Asset Palette choose one of the following:-

Options:
Select from the Assets Palette icons:-
TrainFilter S20.png rolling stock assets
OR
Select from the Assets Palette drop down list:-
 Rolling Stock 


Select the rolling stock asset to be added using Steps DotPoint2.JPG and DotPoint3.JPG, or the  Shortcut , as described in PageLink.PNG Placing a Scenery Mesh Object above.

Then continue as shown below:-
PlacementRollingStockObject S20.png
DotPoint4.JPG Left Click on the track at the position where you want the Rolling Stock Object to be placed.


 Moving a Rolling Stock Object 

BlueDot10x10.png Once a Rolling Stock Object (e.g. a wagon) has been placed it can be moved using the Placement Tool


Steps: To move a Track Object using the Placement Tool:-
DotPoint1.JPG Left Click and Drag the Anchor Point (the small yellow dot attached to the object) to any position along the track or to another track. It can also be coupled to a consist and then decoupled by dragging the same Anchor Point.


PencilTips.PNG Moving, coupling and decoupling Rolling Stock Objects can also be performed, with more control, using the Free Move Tool or the Fine Adjustment Tool.


 Deleting a Rolling Stock Object 

To delete a rolling stock object (or any object) that has just been added by the Placement Tool and is still highlighted, choose one of the following:-
Options:
Ablue.png press the  Delete  key, OR
Bblue.png open its Context Menu (Left Click on its icon or press the  T  key) and select the option  Delete 
NotePad.PNG If the object is not highlighted then you must first switch to either the Free Move Tool or the Fine Ajustment Tool, select the object and then choose one of the above options


 Rolling Stock Object Context Menu 

Rolling Stock Object Context Menu Options
Once a rolling stock object has been placed you can open its Context Menu (Left Click on its icon or press the  T  key) to access a range of options and functions. The following specific options will appear, along with other more general options, in the objects Context Menu.
 Rotate Vehicle  rotates (reverses) the facing direction of a selected rolling stock object. If more than one object has been selected then they will all have their directions reversed but they will remain in the same order
 Change Consist Heading  reverses the consist heading as indicated by the directions of the red and green arrows above the start and end of the consist
 Rotate Consist Heading  the entire consist is reversed, both in the order of the vehicles and the direction they face
 Merge into Single Train  when two or more separate rolling stock assets have been selected they will be coupled into a single consist. See PageLink.PNG Coupling Rolling Stock Objects for more details
 Save to Consist Asset...  saves the selected rolling stock objects as a new consist asset in the Assets Palette
See PageLink.PNG Rolling Stock Object Context Menu for the full list of Context Menu options for Rolling Stock Objects.


Naming an Object with the Placement Tool

  SkipUp.png        
BlueDot10x10.png A newly placed and still selected (highlighted) object can be given a name while the Placement Tool is still active


NotePad.PNG If the object is not selected (highlighted) and the Placement Tool is not active then use the Free Move Tool or the Fine Adjustment Tool to name the object


Steps: To name an object using the Placement Tool immediately after it has been placed:-
DotPoint1.JPG Open the Context Menu of the highlighted object - either Left Click on its icon or press the  T  key
DotPoint2.JPG Select the menu option  Edit Properties 
DotPoint3.JPG Enter a name in the Properties Name Entry text box and click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


The Eyedropper Tool

SkipDown.png SkipUp.png Top Next Up Next Down Bottom
S20 DropperToolIcon.png Keyboard Shortcut:  R  The  Eyedropper Tool  identifies and selects objects in a Trainz World
This tool uses the Assets Palette. If this palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


PencilTips.PNGWhen selected, this tool has a distinctive pointer icon which makes it easy to identify that the Eyedropper Tool is active EyedropperToolPointer S20.png


The Eyedropper Tool has no drop down menu lists.

PencilTips.PNGAn Eyedropper is inside all the tools so you can quickly identify any object without having to switch to the Eyedropper Tool and back again.
DotPoint.JPG hold down the  Alt  key and move the pointer tool onto an object to reveal its name as a  ToolTip 
DotPoint.JPG hold down the  Alt  key and Left Click on an object to select it in the Assets Palette list
DotPoint.JPG hold down the  Alt  key and Left Click on the terrain to copy the Height value at that point into the Tool Options Palette  Height  setting. That value can then be used to set the brush Height for other terrain areas
DotPoint.JPG hold down the  Alt  key and Left Click on a track or spline segment to copy the Grade value at that point into the Tool Options Palette  Grade  setting. That value can then be used to set the Grade of other spline segments


Eyedropper Tools
Steps: To use the Eyedropper:-
DotPoint1.JPG move the pointer, which will look like an Eyedropper, over any object to reveal its name in a  ToolTip  below the pointer
DotPoint2.JPG Optional: hold the eyedropper over any object for a few seconds to reveal more information such as its <kuid> code
DotPoint3.JPG Optional: Left Click on an object to select it in the Assets Palette


Quick Steps

SkipDown.png SkipUp.png        

DotPoint1.JPG With the Eyedropper Tool selected, move the tool pointer (which will now be an eyedropper symbol) onto any object in view.

Eyedropper
DotPoint2.JPG Left Click on the object to identify it (highlighted in grey) in the Assets Palette filter list AssetFilterNameHighlighted S20.png
Asset filter set by the Eyedropper in S20


DotPoint3.JPG Left Click on the object name in the Assets Palette filter list to select it (highlighted in blue) and switch control to the Placement Tool so the next Left Click in the route will place the selected object in the route.

AssetFilterNameSelected S20.png


Narrowing the Search

SkipDown.png SkipUp.png        
BlueDot10x10.png Sometimes (or often) a scene will be too crowded with different scenery objects to be able to use the Eyedropper Tool to easily select a single object. In these cases additional options are available to help "remove the clutter".
PencilTips.PNGThese filter options can be used with the Placement Tool, Free Move Tool, Fine Adjustment Tool and the Marquee Tool as well as with the Eyedropper Tool


At the top of the Assets Palette is a drop down box which controls how the Tool works with the filters that you set.

Assets palette The drop down box will provide three options:-
BulletTick.png Filter List
BulletTick.png Filter Selection
BulletTick.png Filter Visibility
AssetsPaletteFilterOptions S20.png


These options work with the Asset Filters to help narrow the search for a specific object or type of object that is in the route.

Asset Filter Options:
 Filter List  this option will have no effect on the operation of the Tool or on the objects displayed on the screen. It is the default setting and any selections made with the Tool will be shown in the Assets Palette as described in the section Quick Steps above.
 Filter Selection  this option will restrict the Tool to only working on those objects that are in the filtered list. Objects that are not in the filtered list cannot be selected.
 Filter Visibility  this option will hide all objects that are not in the filtered list. The only exceptions are Ground Textures and Effect Layers which will be visible but, unless they are also in the filtered list, cannot be selected.

As an example the following images show the progressive application of a Visibility Filter.

AssetFilterScene1 S20.png AssestFilteredScene1.png Ablue.png No filter has been applied.


All the objects are visible on the Surveyor screen.

ALL objects can be selected.

AssetFilterScene2 S20.png AssestFilteredScene2.png

Bblue.png The Visibility Filter option has been applied to restict visible object to those selected by the Asset Filter settings.

Cblue.png The filtered list has been set to display only Scenery Splines.

All objects except Scenery Splines, Ground Textures and Effect Layers are now hidden.

Now only Scenery Splines can be selected.

AssetFilterScene3 S20.png AssestFilteredScene3.png

Dblue.png An additional filter has been applied. The word "fence" has been added to the search text box.

All Scenery Splines that do not have the text "fence" in their names or descriptions have now been hidden.

Now only the remaining visible Scenery Splines can be selected.


The Free Move Tool

SkipDown.png SkipUp.png Top Next Up Next Down Bottom
S20 FreeMoveToolIcon.png Keyboard Shortcut:  S  The  Free Move Tool  moves objects around a Trainz World
This tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


The Free Move Tool has no drop down menu lists.

Free Move Tools
PencilTips.PNGFree Move Alternatives
In addition to the Free Move Tool the position and/or height of objects can be changed by choosing one of the following:-
Options:
Ablue.png using the PageLink.PNG Fine Adjustment Tool OR
Bblue.png editing its  x   y   z  values in PageLink.PNG The Info Palette OR
Cblue.png selecting the  Apply Height  option in its Context Menu


Naming an Object with the Free Move Tool

SkipDown.png SkipUp.png        
Steps: To name an object using the Free Move Tool:-
DotPoint1.JPG Select the object to be named. If more than one object has been selected then only the object with the Context Icon will be named
DotPoint2.JPG Open the Context Menu of the selected object - either Left Click on its icon or press the  T  key
DotPoint3.JPG Select the menu option  Edit Properties 
DotPoint4.JPG Enter a name in the Properties Name Entry text box and click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Free Move: Scenery Mesh Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Individual "non-spline" scenery objects that are not attached to track are often referred to in Trainz terminology as Scenery Mesh Objects.

 Free Move: Move a Mesh Object 

FreeMoveToolCar S20.png
Steps: To move a Scenery Mesh Object:-
DotPoint1.JPG Select the Free Move Tool (or press the  S  key)
DotPoint2.JPG Left Click and Drag the object in any horizontal direction


NotePad.PNG When moving a scenery object, its height will be fixed to the terrain height.


 Free Move: Set the Height of a Scenery Mesh Object 

PencilTips.PNG You can copy the height of a selected scenery mesh object (e.g. a house) into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object.
 
Steps: To copy the height of any selected object into the  Height  setting:-
DotPoint1.JPG Right Click in the  Height  setting in the Tool Options Palette
DotPoint2.JPG select the  Get Height from Selection  option


To set the height of a selected scenery mesh object, choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Height  icon is not coloured  Gold . OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Cblue.png select the  Apply Height  setting from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) to apply an existing height value, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


 Free Move: Mesh Object Context Menu 

A selected scenery mesh object, or a group of selected scenery mesh objects, will have a Context Icon that opens a Context Menu. Left Click on the icon or press the  T  key. The icon design will vary between object types.


Mesh Object Context Menu
ContextMenuMeshObject S20.png
 Cut  remove the selected object or objects from the route and move them into the Scrapbook
 Copy  copy the selected object or objects and place them into the Scrapbook
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the selected objects. It has the same effect as pressing the  Delete  key
 Replace Object with Selected Asset  the selected object will be replaced with the asset currently selected in the Assets Palette. If no object has been selected in the Assets Palette or it is the wrong type (e.g. a scenery spline instead of a mesh object) then this option will be greyed out
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out
 Smooth Ground Under Selected  changes the height of the terrain under the object to match the set height of the object. If multiple objects at different heights have been selected then the terrain height will be set to match, as far as possible, the height of each object
 Settle on Ground  sets the height of the objects to match the height of the terrain beneath them ("drops them back to earth")
 Apply Height  sets the height of the selected objects to the value in the Tool Options Palette  Height  setting
 Reset Object Rotation  resets the rotation angle of the selected objects to their default values
 Randomise Object Rotation  applies a random rotation angle to each selected object around its vertical axis
 Select in Assets Palette  highlights the selected object in the Assets Palette
 Edit Properties  opens the Properties window of the selected object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Free Move: Track Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Track Objects (signals, switches, speed signs, markers, etc) are always attached to an existing track
BlueDot10x10.png In Surveyor 2.0 they can be moved left, right, above and below the track

 Free Move: Move a Track Object 

BlueDot10x10.png Track objects can be dragged to new positions along and beside the track or to a different track


FreeMoveTrackObject S20.png
Step: To move a track object horizontally:-
DotPoint1.JPG Left Click and Drag the object anywhere in the horizontal plane including away from the track
PencilTips.PNG You can drag the track object to a different track

FreeMoveTrackObjectMoveH S20.png


Track objects that have been moved away from or closer to the track will still function normally.

PencilTips.PNGSituations where it is useful to be able to move a track object away from the track include:-
DotPoint.JPG placing Track Marks and Triggers above (see the next section) or beside the track so that they are not hidden by consists parked on top of them
DotPoint.JPG repositioning switches, signals, track signs closer to or further away from the track - particularly useful if the track object was originally created for a different gauge track


 Free Move: Set the Height of a Track Object 

BlueDot10x10.png Track objects can be raised above and lowered below the track level.
PencilTips.PNG You can copy the height of a selected track mesh object (e.g. a signal) into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object.
 
Steps: To copy the height of any selected object into the  Height  setting:-
DotPoint1.JPG Right Click in the  Height  setting in the Tool Options Palette
DotPoint2.JPG select the  Get Height from Selection  option


FreeMoveTrackObjectMoveH S20.png
Throw Lever track object level with the track
To set the height of a selected track object, choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Height  icon is not coloured  Gold . OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Cblue.png select the  Apply Height  option from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) to apply an existing height value, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


BlueDot10x10.png Track objects that have been "height adjusted" will still function normally and can still be moved along the track without reversing the height change .
FreeMoveTrackObjectMoveHV S20.png
After being moved vertically
PencilTips.PNGA situation where it might be useful to raise a signal above the track level would be to place it higher up on the wall of a cutting

 Free Move: Track Object Context Menu 

A selected track mesh object, or a group of selected track mesh objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

To open a selected track objects Context Menuchoose one of the following:-
Options:
Ablue.png Left Click the Context Icon ContextIconsTrackObjects S20.png OR
Bblue.png Press the  T  key


Track Object Context Menu
ContextMenuTrackObject S20.png
 Cut  remove the selected object or objects from the route and move them into the Scrapbook
 Copy  copy the selected object or objects and place them into the Scrapbook
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the selected objects. It has the same effect as pressing the  Delete  key
 Replace Object with Selected Asset  the selected object will be replaced with the asset currently selected in the Assets Palette. If the asset selected in the Assets Palette is the wrong type (e.g. a scenery spline) then this option will be greyed out
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out.
 Smooth Ground Under Selected  changes the height of the terrain under the object to match the set height of the object. If multiple objects at different heights have been selected then the terrain height will be set to match, as far as possible, the height of each object
 Settle on Ground  sets the height of the objects to match the height of the terrain beneath them ("drops them back to earth")
 Apply Height  sets the height of the objects to the value in the Tool Options Palette  Height  setting
 Reattach to Track  if the object has been moved away from the track then it will be reset to its correct position on the track
 Rotate Trackside  reverses the position of the object on the track (e.g. to the other side)
 Change Junction Direction  if the object is a track switch then its switch direction will be reversed
 Select  in Assets Palette  highlights the selected object in the Assets Palette
 Edit Properties  opens the Properties window of the selected object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


NotePad.PNG Notes:

  Track objects can be restored to their original height and position (on the track) by opening their Context Menu and choosing one of the following:-
Options:
Ablue.png  Reattach to Track  to cancel the both the height and position changes, OR
Bblue.png  Settle on Ground  to cancel the height change only


Track objects can also be rotated to the opposite side of the track.

FreeMoveTrackObjectReversed S20.png
Steps: To rotate a track object:-
DotPoint1.JPG Open the track objects Context Menu (Left Click the icon or press the  T  key)
DotPoint2.JPG Select the option  Rotate Trackside 
Rotating a track object does not change its distance from the track or its height.


Free Move: Spline Objects (Including Track)

SkipDown.png SkipUp.png        
BlueDot10x10.png Scenery splines and track splines are defined by their endpoints. Splines are usually added to a route as a series of joined segments linked at the endpoints.
Moving a spline can involve moving one of the following:-
Options:
Ablue.png an endpoint, OR
Bblue.png a segment, OR
Cblue.png multiple segments including the whole length of the spline


 Free Move: Move Spline Endpoints 

FreeMoveToolSpline S20.png
Steps: To move an individual spline endpoint:-
DotPoint1.JPG Select the Free Move Tool or press the  S  key
DotPoint2.JPG Left Click and Drag the selected spline endpoint in any horizontal direction
Active (selected) endpoints are shown as green. Inactive spline endpoints are shown as black


NotePad.PNG The spline endpoint will be fixed at its original height.


 Free Move: Move Spline Segments 

Splines are frequently made of multiple segments joined together. You can easily move a spline by moving its segments, individually or as a group.

spline made of 3 joined segments
NotePad.PNG Not all splines have endpoints at each ends. As shown in the image on the left, some splines will have an "endcap" that is attached to the start of the first segment and to the end of the last segment. The use of an endcap is a purely cosmetic effect - to give the spline a more distinctive appearance.


FreeMoveSplineSegmentSelected S20.png
Steps: To move an individual segment or multiple segments:-
DotPoint1.JPG Select the Free Move Tool or press the  S  key
DotPoint2.JPG Left Click on the spline segment to be moved - click anywhere between the two spline endpoints on the segment
NotePad.PNG Notes:

DotPoint.JPG the selected segment will be highlighted in green/yellow.
DotPoint.JPG The segment will have a temporary endpoint inserted at the location you clicked.


PencilTips.PNGTemporary spline endpoints can be made permanent by selecting the  Insert Spline Point Here  option from the segment Context Menu


FreeMoveSplineSegmentsAllSelected S20.png
IF you are going to select and move more than one spline segment, then:-
DotPoint3.JPG hold the  Shift  key down and individually Left Click between the endpoints on each additional segment.


The last segment that you Left Click will have the temporary endpoint and Context Icons added.
PencilTips.PNGTo select ALL the segments in a spline, Double Left Click on a segment

If the spline contains a junction then this will only select all the segments upto the junction point

The segment that you double-clicked will have the temporary endpoint and Context Icons added.
DotPoint4.JPG Left Click and Drag the selected segment(s) in any horizontal direction.
If you had selected:-
DotPoint.JPG only a single spline segment then only that segment will be moved and the adjacent segments that were not selected will have their shapes (but not their endpoints) adjusted
DotPoint.JPG multiple spline segments then those segments will be moved and the adjacent segments that were not selected will also have their shapes adjusted
DotPoint.JPG the entire spline then ALL the segments and endpoints will be moved
FreeMoveSplineSegmentSelectedMoved S20.png FreeMoveSplineSegmentsAllSelectedMoved S20.png


 Free Move: Add a Spline Junction 

BlueDot10x10.png A junction is formed when three spline segments are joined at an endpoint. Junctions can be formed using non identical but compatible spline objects, such as different types of track splines.


NotePad.PNG The Free Move Tool cannot be used to add a junction, you MUST USE the Placement Tool


SplineJunction S20.png
Steps: To add a junction to a spline object:-
DotPoint1.JPG Select the spline object to be used for the junction. The easiest method is hold down the  Alt  key and Left Click on an existing spline object that you want to use. This will also select the Placement Tool in Step  2  below so you can skip to Step  3 
DotPoint2.JPG Select the Placement Tool from the Tools Palette
DotPoint3.JPG Left Click on the spline at the spot where the junction is to be created. This can be on an existing endpoint or between two endpoints where a new endpoint will be inserted
DotPoint4.JPG move the mouse pointer out from the junction to where the next endpoint of the spline branch will be placed and Left Click


Steps: To remove a junction but keep all its spline segments:-
DotPoint1.JPG select (Left Click on) the junction endpoint
DotPoint2.JPG open the endpoint Context Menu by a Left Click on its Context Icon SplineEndPointContextIcon S20.png or by pressing the  T  key
DotPoint3.JPG select the  Separate Splines  menu option (this will separate ALL the spline segments that meet at that endpoint)
NotePad.PNG
DotPoint.JPG A junction can be removed by deleting any spline segment that connects to it
DotPoint.JPG A junction endpoint can be moved by using the Free Move Tool or the Fine Adjustment Tool


 Free Move: Add a Track Junction 

BlueDot10x10.png A track junction is formed using track splines in the same way as described above but track junctions have additional features


PlacementTrackJunction S20.png
When a junction is created using Track Spline Objects, a junction switch will be automatically added.
DotPoint.JPG the switch will be the one specified in the Region listed in the Route Properties. The region and its switch can be changed by opening the SurveyorEditIcon.png Surveyor Edit Menu and selecting  Edit Route... . If no region has been specified then a default switch (as shown left) will be used
DotPoint.JPG use the PageLink.PNG Free Move Tool or the PageLink.PNG Fine Adjustment Tool to move or delete the switch and to open its Context Menu for editing


LinkWiki.PNG

Information on creating and editing a Region can be found on the Trainz Wiki at:-

How to Create a Region Asset


PencilTips.PNG Using Procedural Tracks
If the track object used is a Procedural Track then the junction endpoint dot will be coloured:-
DotPoint.JPG RED (as shown above) if the junction exceeds the maximum allowed values for a procedural junction, OR
DotPointBlack.JPG BLACK if the junction is within the maximum allowed values for a procedural junction
See the Wiki Page WikiLink.PNG How to Use Procedural Track for more details


 Free Move: Set Spline Height 

PencilTips.PNG You can copy the height of a spline segment or endpoint into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper
Steps: To copy the Height of a spline segment (but not an endpoint):-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto the spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG When the eyedropper is active spline endpoints will not be visible and cannot be selected. This option will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
If the segment has a slope then the height at the point clicked will be copied into the  Height  setting and the spline gradient will be copied into the  Grade  setting
  OR
Bblue.png Use the  Height  setting drop down menu
Steps: To copy the Height of a spline segment or one of its endpoints:-
DotPoint1.JPG Left Click on the spline segment or endpoint
DotPoint2.JPG Right Click in the Tool Options Palette  Height  setting box
DotPoint3.JPG Select the  Get Height from Selection  option
If the selected spline segment has a slope then the height at its midpoint will be used


To set the height of a selected spline (including track) or endpoint, choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Height  icon is not coloured  Gold . OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Cblue.png select the  Apply Height  option from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) to apply an existing height value, OR
Dblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


To set the heights of multiple spline segments to the value stored in the Tool Options Palette  Height  setting:-
SelectedSplines S20.png
DotPoint1.JPG Select the spline segments using:-
DotPoint.JPG  Shift  + Left Click to select individual segmants, OR
DotPoint.JPG Double Left Click to select all the segments up to the next junction (in both directions).
DotPoint2.JPG Select one of the options Ablue.png, Bblue.png, Cblue.png or Dblue.png described above
SelectedSplinesHeight S20.png ALL the selected spline segments and their endpoints will be set to the specified height.


 Free Move: Set Spline Gradient 

PencilTips.PNG You can copy the current Grade of any spline segment into the Tool Options Palette  Grade  setting. Once it has been copied it can be applied to any other object that has a Grade setting. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper
Steps: To copy the Grade of a spline segment (but not an endpoint):-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto the spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG When the eyedropper is active spline endpoints will not be visible and cannot be selected. This option will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
The height at the point clicked will also be copied into the  Height  setting
  OR
Bblue.png Use the  Grade  setting drop down menu
Steps: To copy the Grade of a spline segment or one of its endpoints:-
DotPoint1.JPG Left Click on the spline segment or endpoint
DotPoint2.JPG Right Click in the Tool Options Palette  Grade  setting box
DotPoint3.JPG Select the  Get Grade from Selection  option


To set the gradient of a selected spline segment (including track), choose one of the following:-
Options:
Ablue.png Left Click in the Tool Options Palette  Grade  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Grade  icon is not coloured  Gold . OR
Bblue.png select the  Apply Grade to this Spline Endpoint  option from the Context Menu for the segment endpoint (not the segment context icon) - Left Click on the endpoint Context Icon SplineEndPointContextIcon S20.png to apply the existing grade value. The endpoint that has been selected will be the starting point of the grade.


To set the gradients of multiple spline segments to the value stored in the Tool Options Palette  Grade  setting:-
SelectedSplines S20.png
DotPoint1.JPG Select the spline segments using:-
DotPoint.JPG  Shift  + Left Click to select individual segmants, OR
DotPoint.JPG Double Left Click to select all the segments up to the next junction (in both directions).
NotePad.PNG To apply the same gradient to all the selected segments make sure that the first segment has the context icons
DotPoint2.JPG Open the Context Menu of the first or starting endpoint (Left Click on the icon SplineEndPointContextIcon S20.png)
DotPoint3.JPG Select the option  Apply Grade to this Spline Endpoint 
SelectedSplinesGradient S20.png The selected spline segments are now set to the specified gradient.
NotePad.PNG If the selected endpoint is NOT at the start of the highlighted segments then the gradient will be applied in both directions from that endpoint as shown below.

SelectedSplinesGradientUShape S20.png

Once the height and/or gradient of the spline segments have been set then other effects can be added.
From the Context Menu of the highlighted segments, select the options:-
 Smooth Ground Under Selected   to raise the ground surface up to the spline height, and
 Paint Under Selected  to paint the currently selected ground texture under the spline using the settings in the Tool Options Palette
SelectedSplinesGradientSmoothPaint S20.png


 Free Move: Spline Object Context Menu 

A selected scenery spline object, or a group of selected scenery spline objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

ContextIconsSpline S20.png
NotePad.PNG Notes:
Splines have two different Context Icons that lead to two slightly different Context Menus.
DotPoint.JPG one context icon and menu for each endpoint SplineEndPointContextIcon S20.png
DotPoint.JPG one context icon and menu for the segment SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png
If multiple segments have been selected then the last segment added to the selection will have the context icons. If all the segments were selected by a Double Left Click then the segment that was clicked will have the icons.


To open a selected objects Context Menu choose one of the following:-
Options:
Ablue.png Left Click the Context Icon SplineContextIcons S20.png OR
Bblue.png Press the  T  key


Spline Object Context Menus
SplineEndPointContextIcon S20.png  Endpoint Context Menu 
ContextMenuSplineObject S20.png
SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png  Segment Context Menu 
ContextMenuSplineSegment S20.png


 Cut  remove the selected segment or segments from the route and move them into the Scrapbook (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Copy  copy the selected segment or segments and place them into the Scrapbook (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the segment, segments or endpoint. It has the same effect as pressing the  Delete  key
 Replace Spline with Selected Asset  the highlighted spline will be replaced with the asset currently selected in the Assets Palette. If the asset selected in the Assets Palette is the wrong type (e.g. a mesh object instead of a scenery spline) then this option will be greyed out (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Smooth Ground Under Selected  changes the height of the terrain under the segment or segments to match the set height of the spline (does not work for endpoints SplineEndPointContextIcon S20.png)
 Settle on Ground  sets the height of the selected endpoint or segments to match the height of the terrain beneath them ("drops them back to earth"). When used on segments the spline will follow the height changes of the terrain
 Apply Height to this Spline Endpoint  sets the height of the selected endpoint to the value in the Tool Options Palette  Height  setting (SplineEndPointContextIcon S20.png only)
PencilTips.PNGYou can copy the Height from an existing spline endpoint into the  Height  setting of the Tool Options Palette. Once it has been copied it can be applied to any other object.
DotPoint.JPG hold down the  Alt  key and Left Click on the spline endpoint to copy its Height value. That value can then be used to set the Height of other spline endpoints
 Apply Height  sets the height of the selected segment or segments to the value in the Tool Options Palette  Height  setting (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Apply Grade to this Spline Endpoint  you must first select a segment then click on one of its endpoint icons SplineEndPointContextIcon S20.png. This sets the height of the endpoint to give a Grade to the surrounding segments that matches the value in the Tool Options Palette  Grade  setting
PencilTips.PNGYou can copy the Grade from an existing spline segment into the  Grade  setting of the Tool Options Palette. Once it has been copied it can be applied to any other object.
DotPoint.JPG hold down the  Alt  key and Left Click on the spline segment to copy its Grade value. That value can then be used to set the Grade of other spline segments
 Straighten Spline  forces a straight line (as far as possible) between the endpoints of a single segment. This option will be Tick.PNG ticked if the segment has already been straightened in which case selecting this option will "un-straighten" the segment and remove the tick (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Separate Splines  breaks two spline segments into two separate (independent) splines at the selected endpoint (SplineEndPointContextIcon S20.png only)
 Merge Splines  removes the selected endpoint between two segments and merges the segments into one (SplineEndPointContextIcon S20.png only). Two segments can also be merged by deleting a selected endpoint with the  Delete  key
 Insert Spline Point Here  splits the selected segment into two segments by adding a new endpoint at the point where the segment was clicked (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Select in Assets Palette  highlights the selected spline object in the Assets Palette
 Edit Properties  opens the Properties window of the selected spline object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Free Move: Rolling Stock Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Rolling Stock Objects (locomotives, wagons, etc) can only be moved along the track that they are attached to. If they are moved off the track then they will immediately "snap back" to the nearest track when they are released.

 Free Move: Move Rolling Stock Objects 

Use the Free Move tool to move a selected rolling stock object along the track.

PencilTips.PNGTo move an entire consist of rolling stock objects, Double Left Click on any one of the objects in the consist to select them all and then move them as one object


FreeMoveRollingStock S20.png
NotePad.PNG Notes:

It is possible to place a rolling stock object so that it "overlaps" (occupies the same space as) another rolling stock object. A large yellow X rotating above the rolling stock object is a sign of this "conflict".
This can happen if a rolling stock object is moved off the track and released. It will instantly snap to the nearest track position even if that position is already occupied.
PlacementRollingStockCollision S20.png
The simple solution is to use the Free Move Tool to move the incorrectly placed object to an unoccupied section of the track.


 Free Move: Decouple Rolling Stock Objects 

BlueDot10x10.png All decoupling operations between Rolling Stock Objects are performed using just a Left Click and Drag.


PencilTips.PNGTo decouple a string of joined rolling stock objects from a consist (for example, the first or last 5 wagons),  Shift  + Left Click on each of the objects to be selected and then drag them away from the consist


A rolling stock object or objects in the middle of a consist can also be decoupled. This will break the consist into 3 sections.

FreeMoveRollingStockCouple5 S20.png

FreeMoveRollingStockCouple5A S20.png

Steps: To decouple rolling stock from a consist:-
DotPoint1.JPG Select one (Left Click) or more ( Shift  + Left Click) rolling stock objects inside a consist
If more than one object is selected, then they:-
DotPoint.JPG do not have to be connected to each other
DotPoint.JPG should be in the same consist - the results may be "unexpected" if the objects are selected and dragged out from different consists


DotPoint2.JPG Left Click and Drag the object or objects out of the consist and onto an Unoccupied section of track
DotPoint.JPG do not release the mouse button until you have the rolling stock objects in position otherwise they will simply "snap back" to the nearest track, regardless of whether it is already occupied or not. Think of the yellow connecting line between the wagon and the track shown in the image as if it is a "stretched rubber band"
DotPoint.JPG The rotating yellow X floating above the selected and now disconnected consist in the image indicates that it has been "derailed" from the track. This will disappear when it is "rerailled" again


 Free Move: Couple Rolling Stock Objects 

BlueDot10x10.png All coupling operations between Rolling Stock Objects can be performed using just a Left Click and Drag or through the objects Context Menu.

Options:

Ablue.png Using "Click and Drag"

Consider the following simple situation:-

The guard van (caboose) standing at the rear of a consist has to be coupled to the rear gondola wagon.
FreeMoveRollingStockCouple1 S20.png

FreeMoveRollingStockCouple2 S20.png
Steps: To Couple rolling stock objects:-
DotPoint1.JPG Select (Left Click) the rolling stock object (in this case the guard van) to be coupled to a consist or another rolling stock object (in this case the gondola)
DotPoint.JPG If more than one object has to be selected then use a  Shift  + Left Click to individually select each object
DotPoint.JPG If ALL the objects in a consist have to be selected then use a Double Left Click on any object in the consist
DotPoint2.JPG Left Click and Drag the object (the guard van) along the track to its target object or consist. When dragged rolling stock objects will "drop" or lower their height a few cms
DotPoint.JPG If the selected object (or objects) is already part of a consist then dragging will decouple it from the consist before moving it
DotPoint.JPG When it reaches the target object and couples it cannot be moved any further
DotPoint3.JPG Release the object when it has coupled and it will return to its correct height


Bblue.png Using the Context Menu

Using the same situation as above, the isolated guard van and the gondola wagon at the end of a consist are to be coupled together.

FreeMoveRollingStockCouple3 S20.png
Steps:
DotPoint1.JPG Select,  Shift  + Left Click, on both objects
PencilTips.PNGThe order of selection IS important. Select the "destination" object, where the others will be coupled, last

The Context Icon will appear on the last rolling stock object selected.

DotPoint2.JPG Open the Rolling Stock Object Context Menu by choosing one of the following:-

Options:
Ablue.png Left Click on the Context Icon of the last selected rolling stock object, OR
Bblue.png press the  T  key

DotPoint3.JPG Select the option  Merge into Single Train 


There are two possible outcomes depending on which object has the Context Icon

DotPoint1RedC.png Context Icon on the Gondola Wagon

FreeMoveRollingStockCouple3A S20.png
Using the Merge into Single Train option with the Context Icon on the gondola wagon at the end of the consist. The guard van couples to the gondola wagon and the consist

DotPoint2RedC.png Context Icon on the Guard Van

FreeMoveRollingStockCouple4A S20.png
Using the Merge into Single Train option with the Context Icon on the guard van. The gondola wagon decouples from the consist and couples to the guard van


Using a more complex example involving multiple objects from several different consists. The selected wagons shown below are to form a single consist based on the loco.
FreeMoveRollingStockMultiMerge1 S20.png
The loco was the last object to be selected so it has the Context Icon. The Context Menu is opened and the option  Merge into Single Train  is selected with the result as shown below.
FreeMoveRollingStockMultiMerge2 S20.png
The wagons and loco have been combined into a single consist but not necessarily in a useful order. Left Click and Drag the incorrectly placed vehicles to their correct positions.


 Free Move: Rolling Stock Object Context Menu 

A selected rolling stock object, or a group of selected rolling stock objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

To open a selected rolling stock object's Context Menu choose one of the following:-
Options:
Ablue.png Left Click its Context Icon ContextIconsRollingStock S20.png OR
Bblue.png Press the  T  key


Rolling Stock Object Context Menu
ContextMenuRollingStock S20.png
NotePad.PNG Notes:

Unlike other Context Menus, the  Cut  and  Copy  menu options are not selectable for Rolling Stock Objects because these objects cannot be added to a Scrapbook. The  Save to Consist Asset...  option performs some of the Scrapbook functions for rolling stock.
 Paste  the contents of the current Scrapbook will be pasted at the cursor (focus) point
 Delete  the selected rolling stock objects will be deleted. It has the same effect as pressing the  Delete  key
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out.
 Smooth Ground Under Selected  changes the height of the terrain under the rolling stock object to match its set height
 Reattach to Track  this option is only selecteable if a rolling stock object has derailed
 Rotate Vehicle  rotates (reverses) the facing direction of a selected rolling stock object. If more than one object has been selected then they will all have their directions reversed but they will remain in the same order
 Change Consist Heading  reverses the consist heading as indicated by the directions of the red and green arrows above the start and end of the consist
 Rotate Consist Heading  the entire consist is reversed, both in the order of the vehicles and the direction they face
 Merge into Single Train  when two or more separate rolling stock assets have been selected they will be coupled into a single consist. See PageLink.PNG Coupling Rolling Stock Objects for more details
 Save to Consist Asset...  saves the selected rolling stock objects as a new consist asset in the Assets Palette
 Select in Assets Palette  highlights the selected rolling stock object in the Assets Palette
 Edit Properties  opens the Properties window of the selected rolling stock object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


The Fine Adjustment Tool

SkipDown.png SkipUp.png Top Next Up Next Down Bottom
S20 FineAdjustmentToolIcon.png Keyboard Shortcut:  D  The  Fine Adjustment Tool  makes 3D adjustments (position and rotations) to objects in a Trainz World
This tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


The Fine Adjustment Tool has no drop down menu lists.

Fine Adjustment Tools
PencilTips.PNGFine Adjustment Alternatives
In addition to the Fine Adjustment Tool the position and/or height of objects can be changed by choosing one of the following:-
Options:
Ablue.png using the PageLink.PNG Free Move Tool
Bblue.png editing its  x   y   z   r   p   y  values in PageLink.PNG The Info Palette
Cblue.png selecting the  Apply Height  option in its Context Menu


BlueDot10x10.png The most obvious feature of the Fine Adjustment Tool is the 3D Anchor Frame it adds to a selected object. The frame is made of 3 straight and 3 curved coloured lines, called Anchors, which control the position and orientation of an object or a group of objects.
FineAdjust3DFrame S20.png The Anchor controls are:-
 The Horizontal and Vertical Anchors 
 Red   Green   Blue  move the object (forward/back or up/down) in the direction of the Anchor line
 The Rotational Anchors 
 Red   Green   Blue  rotate the object (clockwise and anti-clockwise) along the Anchor Arc Line centred around the Anchor Straight Line of the same colour
NotePad.PNG Not all objects will have  Red  and/or  Green  rotational Anchors.
 The Object Anchor 
     (black central dot) moves the object in any horizontal direction
NotePad.PNG The orientation of the  Red  and  Green  horizontal anchor lines is based on the orientation of the object when it is placed in the scene, not on the compass directions
Steps: To use the Fine Adjustment Tool controls:-
DotPoint1.JPG move the tool pointer onto an Anchor - its colour will change to yellow for Anchor lines or green for the Object Anchor
DotPoint2.JPG Left Click and Drag the Object Anchor in any direction or move the pointer along the chosen Anchor Line in the required direction (e.g. up on the blue vertical Anchor or clockwise around the arc of the red rotational Anchor)


PencilTips.PNGTo achieve finer and more accurate control when moving anchors, choose one of the following:-
Options:
Ablue.png zoom in closer to the anchor point, OR
Bblue.png use the  x   y   z  fine adjustment arrows in the Info Palette object  Pos:  controls. These arrows can be used to set the height and position to cm accuracy (see PageLink.PNG The Info Palette below), OR
Cblue.png use the  r   p   y  fine adjustment arrows in the Info Palette object  Rot:  controls. These arrows can be used to set the rotation to accuracy (see PageLink.PNG The Info Palette below).


Naming an Object with the Fine Adjustment Tool

SkipDown.png SkipUp.png        
Steps: To name an object using the Fine Adjustment Tool:-
DotPoint1.JPG Select the object to be named. If more than one object has been selected then only the object with the Context Icon will be named
DotPoint2.JPG Open the Context Menu of the selected object - either Left Click on its icon or press the  T  key
DotPoint3.JPG Select the menu option  Edit Properties 
DotPoint4.JPG Enter a name in the Properties Name Entry text box and click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Fine Adjustment: Scenery Mesh Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Individual "non-spline" scenery objects that are not attached to track are often referred to in Trainz terminology as Scenery Mesh Objects.

 Fine Adjustment: Move a Mesh Object 

To move an object with the Fine Adjustment Tool choose one of the following:-
Options:
Ablue.png Left Click and Drag anywhere on the selected object (except on an Anchor line) to move it freely in any horizontal direction
OR
Bblue.png Left Click and Drag on an Anchor line to move or rotate it in the direction of the line or arc
These operations can also be performed on a group of selected objects. The 3D Anchor Frame will be on the last object added to the group.


 Blue  vertical Anchor movement
FineAdjustZMove S20.png
   Green  Anchor rotation
FineAdjustYawMove S20.png
   Red  Anchor rotation
FineAdjustPitchMove S20.png
   Blue  Anchor rotation
FineAdjustRotateXYMove S20.png


NotePad.PNG Notes:

DotPoint.JPG Not all objects will have  Red  or  Green  Rotational Anchors
DotPoint.JPG Objects can be restored to their original height and rotation settings by opening their Context Menu and choosing one of the following:-
Options:
Ablue.png  Reset Object Rotation  to cancel the rotation changes, OR
Bblue.png  Settle on Ground  to cancel the height change
DotPoint.JPG The  Randomise Object Rotation  option in the Context Menu only affects rotations around the vertical axis - the  Blue  Rotational Anchor.


 Fine Adjustment: Set the Height of a Scenery Mesh Object 

BlueDot10x10.png Scenery Mesh objects can be raised above and lowered below the ground level.
PencilTips.PNG You can copy the height of a selected scenery mesh object (e.g. a house) into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object.
 
Steps: To copy the height of any selected object into the  Height  setting:-
DotPoint1.JPG Right Click in the  Height  setting in the Tool Options Palette
DotPoint2.JPG select the  Get Height from Selection  option


To set the height of a selected scenery mesh object, choose one of the following:-
Options:
Ablue.png Left Click and Drag Up/Down on the  Blue  vertical Anchor line. Movement is restricted to the length of the Anchor line only, OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Height  icon is not coloured  Gold . OR
Cblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Dblue.png select the  Apply Height  option from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) to apply an existing height value, OR
Eblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


 Fine Adjustment: Mesh Object Context Menu 

A selected scenery mesh object, or a group of selected scenery mesh objects, will have a Context Icon that opens a Context Menu. Left Click on the icon or press the  T  key. The icon design will vary between object types.


Mesh Object Context Menu
ContextMenuMeshObject S20.png
 Cut  remove the selected object or objects from the route and move them into the Scrapbook
 Copy  copy the selected object or objects and place them into the Scrapbook
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the selected objects. It has the same effect as pressing the  Delete  key
 Replace Object with Selected Asset  the selected object will be replaced with the asset currently selected in the Assets Palette. If no object has been selected in the Assets Palette or it is the wrong type (e.g. a scenery spline instead of a mesh object) then this option will be greyed out
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out.
 Smooth Ground Under Selected  changes the height of the terrain under the object to match the set height of the object. If multiple objects at different heights have been selected then the terrain height will be set to match, as far as possible, the height of each object
 Settle on Ground  sets the height of the objects to match the height of the terrain beneath them ("drops them back to earth")
 Apply Height  sets the height of the objects to the value in the Tool Options Palette  Height  setting
 Reset Object Rotation  resets the rotation angle of the objects to their default values
 Randomise Object Rotation  applies a random  Blue  Rotation Anchor angle to each object around its vertical axis
 Select in Assets Palette  highlights the selected object in the Assets Palette
 Edit Properties  opens the Properties window of the selected object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Fine Adjustment: Track Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Track Objects (signals, switches, speed signs, markers, etc) are always attached to an existing track
BlueDot10x10.png In Surveyor 2.0 they can be moved left, right, above and below the track

 Fine Adjustment: Move a Track Object 

BlueDot10x10.png Track objects can be dragged to new positions along and beside the track or to a different track
FineAdjustTrackObject S20.png
To move a track object horizontally, choose one of the following:-
Options:
Ablue.png For movements along the track - Left Click and Drag:-
DotPoint.JPG anywhere within the object (except on an Anchor Line or Anchor Point), OR
DotPoint.JPG on the  Green  horizontal Anchor line (movement is restricted to the Anchor line and track only)
Bblue.png For movements left or right of the track - Left Click and Drag
DotPoint.JPG on the  Red  horizontal Anchor line (movement is restricted to the Anchor line only), OR
DotPoint.JPG on the Object Anchor (the black dot) to get unrestricted horizontal movement including to a different track
For most track objects the Rotational Anchors have no effect
FineAdjustTrackObjectMoveH S20.png
PencilTips.PNGSituations where it is useful to be able to move a track object away from the track include:-
DotPoint.JPG placing Track Marks and Triggers above (see next section) or beside the track so that they are not hidden by consists parked on top of them
DotPoint.JPG repositioning switches, signals, track signs closer to or further away from the track - particularly useful if the track object was originally created for a different gauge track


BlueDot10x10.png Track objects that have been moved away from or closer to the track will still function normally.

 Fine Adjustment: Set the Height of a Track Object 

BlueDot10x10.png Track objects can be raised above and lowered below the track level.
PencilTips.PNG You can copy the height of a selected track mesh object (e.g. a signal) into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object.
 
Steps: To copy the height of any selected object into the  Height  setting:-
DotPoint1.JPG Right Click in the  Height  setting in the Tool Options Palette
DotPoint2.JPG select the  Get Height from Selection  option


FineAdjustTrackObjectMoveH S20.png

Throw Lever track object level with track
FineAdjustTrackObjectMoveHV S20.png

After being moved vertically
To set the height of a selected track object, choose one of the following:-
Options:
Ablue.png Left Click and Drag Up/Down on the  Blue  vertical Anchor line. Movement is restricted to the length of the Anchor line only, OR
Bblue.png in the Tool Options Palette  Height  setting, enter a value followed by the  Enter  key OR
Cblue.png in the Tool Options Palette  Height  setting, enter a value then Right Click and select  Set Height to Selection  OR
Dblue.png from the objects Context Menu select the  Apply Height  option to apply an existing height setting, OR
Eblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


PencilTips.PNGA situation where it might be useful to raise a signal above the track level would be to place it higher up on the wall of a cutting


BlueDot10x10.png Track objects that have been "height adjusted" will still function normally and can still be moved along the track without reversing the height change .


NotePad.PNG For most track objects the Rotational Anchors have no effect


 Fine Adjustment: Track Object Context Menu 

A selected track mesh object, or a group of selected track mesh objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

To open a selected track objects Context Menu choose one of the following:-
Options:
Ablue.png Left Click the Context Icon ContextIconsTrackObjects S20.png OR
Bblue.png Press the  T  key


Track Object Context Menu
ContextMenuTrackObject S20.png
 Cut  remove the selected object or objects from the route and move them into the Scrapbook
 Copy  copy the selected object or objects and place them into the Scrapbook
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the selected objects. It has the same effect as pressing the  Delete  key
 Replace Object with Selected Asset  the selected object will be replaced with the asset currently selected in the Assets Palette. If the asset selected in the Assets Palette is the wrong type (e.g. a scenery spline) then this option will be greyed out
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out.
 Smooth Ground Under Selected  changes the height of the terrain under the object to match the set height of the object. If multiple objects at different heights have been selected then the terrain height will be set to match, as far as possible, the height of each object
 Settle on Ground  sets the height of the objects to match the height of the terrain beneath them ("drops them back to earth")
 Apply Height  sets the height of the objects to the value in the Tool Options Palette  Height  setting
 Reattach to Track  if the object has been moved away from the track then it will be reset to its correct position on the track
 Rotate Trackside  reverses the position of the object on the track (e.g. to the other side)
 Change Junction Direction  if the object is a track switch then its switch direction will be reversed
 Select in Assets Palette  highlights the selected object in the Assets Palette
 Edit Properties  opens the Properties window of the selected object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


NotePad.PNG Notes:

  Track objects can be restored to their original height and position (on the track) by opening their Context Menu and choosing one of the following:-
Options:
Ablue.png  Reattach to Track  to cancel the both the height and position changes, OR
Bblue.png  Settle on Ground  to cancel the height change only


Track objects can also be rotated to the opposite side of the track.

FineAdjustTrackObjectReversed S20.png
Steps: To rotate a track object:-
DotPoint1.JPG Open the track objects Context Menu (Left Click the icon or press the  T  key)
DotPoint2.JPG Select the option  Rotate Trackside 
Rotating a track object does not change its distance from the track or its height.


Fine Adjustment: Spline Objects (Including Track)

SkipDown.png SkipUp.png        
BlueDot10x10.png Scenery splines and track splines are defined by their endpoints. Splines are usually added to a route as a series of joined segments linked at the endpoints.
To move a spline, choose one of the following:-
Options:
Ablue.png moving an endpoint, OR
Bblue.png moving a segment, OR
Cblue.png moving multiple segments including the whole length of the spline


 Fine Adjustment: Move Spline Endpoints 

FineAdjustSplineEndPoint S20.png

The 3D Anchor Frame shown is for a spline endpoint.

Steps: To move an individual spline endpoint:-
DotPoint1.JPG Select the Fine Adjustment Tool.
DotPoint2.JPG Select, Left Click on, the spline endpoint to be moved.
Note: only the horizontal  Red  and  Green  and the vertical  Blue  lines can be selected.
DotPoint3.JPG Left Click and Drag one of the following:-
Options:
Ablue.png an Anchor to move the endpoint in that specific direction, OR
Bblue.png the endpoint itself to move it in any direction in the horizontal plane


 Fine Adjustment: Move Spline Segments 

NotePad.PNG The  Green  rotational Anchor CANNOT be used on Track splines


FineAdjustSplineSegment S20.png The 3D Anchor Frame shown is for a spline segment.
Steps: To move spline segments:-
DotPoint1.JPG Select the Fine Adjustment Tool.
DotPoint2.JPG Select, Left Click on, the spline segment to be moved.
DotPoint3.JPG Left Click and Drag one of the following:-
 
Options:
Ablue.png an Anchor to move the endpoint in that specific direction, OR
Bblue.png anywhere in a segment to move it in any direction in the horizontal plane


PencilTips.PNG To select:-
DotPoint.JPG more than one segment -  Shift  + Left Click on each segment
DotPoint.JPG ALL the segments - Double Left Click on a segment. This will select segments in both directions from the segment clicked. If the spline contains a junction then this will only select the segments upto the junction point


FineAdjustSplineSegmentStraight S20.png Selecting a spline segment with the Fine Adjustment Tool will add a Temporary Endpoint at the point where the segment was clicked.


This will produce 3 Fine Adjustment Tool control frames, one at each end of the segment and one at the click point, as shown in the image on the left. The whole segment can be moved, as shown in the following images, by a Left Click and Drag anywhere within the segment.
FineAdjustSplineSegmentXYMove S20.png
Segment moved to the right along the  Red  horizontal Anchor line
FineAdjustSplineSegmentZMove S20.png
Segment moved up along the  Blue  vertical Anchor line
NotePad.PNG

 Red   Green   Blue  straight anchor lines will move the whole segment along the direction of the line

FineAdjustSplineSegmentRotate S20.png
Segment rotated anti-clockwise around the  Blue  rotational Anchor arc line
FineAdjustSplineSegmentPitch S20.png
Segment rotated clockwise around the  Red  rotational Anchor arc line
NotePad.PNG

 Red   Blue  curved anchor lines will rotate the whole segment around the axis of the same colour


PencilTips.PNG
DotPoint.JPG a  Blue  line height change and a  Red  Anchor rotation can be cancelled at any time (even after saving and reloading the route) by selecting the  Settle on Ground  option from the segments Context Menu
DotPoint.JPG a  Blue  Anchor rotation can be straightened at any time (even after saving and reloading the route) by selecting the  Straighten Spline  option from the segments Context Menu but this will not return the endpoints to their original positions


 Fine Adjustment: Add a Spline Junction 

BlueDot10x10.png A junction is formed when three spline segments are joined at an endpoint. Junctions can be formed using non identical but compatible spline objects, such as different types of track splines.


NotePad.PNG The Fine Adjustment Tool cannot be used to add a junction, you MUST USE the Placement Tool


SplineJunction S20.png
Steps: To add a junction to a spline object:-
DotPoint1.JPG Select the spline object to be used for the junction. The easiest method is hold down the  Alt  key and Left Click on an existing spline object that you want to use. This will also select the Placement Tool in Step  2  below so you can skip to Step  3 
DotPoint2.JPG Select the Placement Tool from the Tools Palette
DotPoint3.JPG Left Click on the spline at the spot where the junction is to be created. This can be on an existing endpoint or between two endpoints where a new endpoint will be inserted
DotPoint4.JPG move the mouse pointer out from the junction to where the next endpoint of the spline branch will be placed and Left Click


Steps: To remove a junction but keep all its spline segments:-
DotPoint1.JPG select (Left Click on) the junction endpoint
DotPoint2.JPG open the endpoint Context Menu by a Left Click on its Context Icon SplineEndPointContextIcon S20.png or by pressing the  T  key
DotPoint3.JPG select the  Separate Splines  menu option (this will separate ALL the spline segments that meet at that endpoint)
NotePad.PNG
DotPoint.JPG A junction can be removed by deleting any spline segment that connects to it
DotPoint.JPG A junction endpoint can be moved by using the Free Move Tool or the Fine Adjustment Tool


 Fine Adjustment: Add a Track Junction 

BlueDot10x10.png A track junction is formed using track splines in the same way as described above but track junctions have additional features


PlacementTrackJunction S20.png
When a junction is created using Track Spline Objects, a junction switch will be automatically added.
DotPoint.JPG the switch will be the one specified in the Region listed in the Route Properties. The region and its switch can be changed by opening the SurveyorEditIcon.png Surveyor Edit Menu and selecting  Edit Route... . If no region has been specified then a default switch (as shown left) will be used
DotPoint.JPG use the PageLink.PNG Free Move Tool or the PageLink.PNG Fine Adjustment Tool to move or delete the switch and to open its Context Menu for editing


LinkWiki.PNG

Information on creating and editing a Region can be found on the Trainz Wiki at:-

How to Create a Region Asset


PencilTips.PNG Using Procedural Tracks
If the track object used is a Procedural Track then the junction endpoint dot will be coloured:-
DotPoint.JPG RED (as shown above) if the junction exceeds the maximum allowed values for a procedural junction, OR
DotPointBlack.JPG BLACK if the junction is within the maximum allowed values for a procedural junction
See the Wiki Page WikiLink.PNG How to Use Procedural Track for more details


 Fine Adjustment: Set Spline Height 

PencilTips.PNG You can copy the height of a spline segment or endpoint into the Tool Options Palette  Height  setting. Once it has been copied it can be applied to any other object. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper
Steps: To copy the Height of a spline segment (but not an endpoint):-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto the spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG When the eyedropper is active spline endpoints will not be visible and cannot be selected. This option will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
If the segment has a slope then the height at the point clicked will be copied into the  Height  setting and the spline gradient will be copied into the  Grade  setting
  OR
Bblue.png Use the  Height  setting drop down menu
Steps: To copy the Height of a spline segment or one of its endpoints:-
DotPoint1.JPG Left Click on the spline segment or endpoint
DotPoint2.JPG Right Click in the Tool Options Palette  Height  setting box
DotPoint3.JPG Select the  Get Height from Selection  option
If the selected spline segment has a slope then the height at its midpoint will be used


To set the height of a selected spline (including track) or endpoint, choose one of the following:-
Options:
Ablue.png Left Click and Drag Up or Down on the vertical  Blue  anchor line in the 3D Anchor Frame. OR
Bblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then press the  Enter  key. This works even if the  Height  icon is not coloured  Gold . OR
Cblue.png Left Click in the Tool Options Palette  Height  setting and enter a new value (or keep the existing value) then Right Click in the setting box and select the  Set Height to Selection  option, OR
Dblue.png select the  Apply Height  option from the objects Context Menu (Left Click on the objects Context Icon or press the  T  key) to apply an existing height value, OR
Eblue.png in the Info Palette enter a value in the objects  z  (height) setting or Left Click and Drag Up or Down on the double arrowheads to its right. This can be used to set the height to cm accuracy (see PageLink.PNG The Info Palette below).


To set the heights of multiple spline segments to the value stored in the Tool Options Palette  Height  setting:-
SelectedSplines S20.png
DotPoint1.JPG Select the spline segments using:-
DotPoint.JPG  Shift  + Left Click to select individual segmants, OR
DotPoint.JPG Double Left Click to select all the segments up to the next junction (in both directions).
DotPoint2.JPG Select one of the options Ablue.png, Bblue.png, Cblue.png, Dblue.png or Eblue.png described above
SelectedSplinesHeight S20.png ALL the selected spline segments and their endpoints will be set to the specified height.


 Fine Adjustment: Set Spline Gradient 

PencilTips.PNG You can copy the current Grade of any spline segment into the Tool Options Palette  Grade  setting. Once it has been copied it can be applied to any other object that has a Grade setting. Choose one of the following:-
Options:
Ablue.png Use the Eyedropper
Steps: To copy the Grade of a spline segment (but not an endpoint):-
DotPoint1.JPG hold down the  Alt  key and move the mouse tool pointer onto the spline segment
DotPoint2.JPG while holding down the  Alt  key Left Click on the spline segment
NotePad.PNG When the eyedropper is active spline endpoints will not be visible and cannot be selected. This option will also change the asset selected in the Asset Palette to the object clicked and it will become the next object added by a Left Click with the Placement Tool
The height at the point clicked will also be copied into the  Height  setting
  OR
Bblue.png Use the  Grade  setting drop down menu
Steps: To copy the Grade of a spline segment or one of its endpoints:-
DotPoint1.JPG Left Click on the spline segment or endpoint
DotPoint2.JPG Right Click in the Tool Options Palette  Grade  setting box
DotPoint3.JPG Select the  Get Grade from Selection  option


To set the gradients of multiple spline segments to the value stored in the Tool Options Palette  Grade  setting:-
SelectedSplines S20.png
DotPoint1.JPG Select the spline segments using:-
DotPoint.JPG  Shift  + Left Click to select individual segmants, OR
DotPoint.JPG Double Left Click to select all the segments up to the next junction (in both directions).
NotePad.PNG To apply the same gradient to all the selected segments make sure that the first segment has the context icons
DotPoint2.JPG Open the Context Menu of the first or starting endpoint (Left Click on the icon SplineEndPointContextIcon S20.png)
DotPoint3.JPG Select the option  Apply Grade to this Spline Endpoint 
SelectedSplinesGradient S20.png The selected spline segments are now set to the specified gradient.
NotePad.PNG If the selected endpoint is NOT at the start of the highlighted segments then the gradient will be applied in both directions from that endpoint as shown below.

SelectedSplinesGradientUShape S20.png

Once the height and/or gradient of the spline segments have been set then other effects can be added.
From the Context Menu of the highlighted segments, select the options:-
 Smooth Ground Under Selected   to raise the ground surface up to the spline height, and
 Paint Under Selected  to paint the currently selected ground texture under the spline using the settings in the Tool Options Palette
SelectedSplinesGradientSmoothPaint S20.png


 Fine Adjustment: Spline Object Context Menu 

A selected scenery spline object, or a group of selected scenery spline objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

To open a selected objects Context Menu choose one of the following:-
Options:
Ablue.png Left Click the Context Icon SplineContextIcons S20.png OR
Bblue.png Press the  T  key
NotePad.PNG Notes:
Splines have two different Context Icons that lead to two slightly different Context Menus.
DotPoint.JPG one context icon and menu for each endpoint SplineEndPointContextIcon S20.png
DotPoint.JPG one context icon and menu for the segment SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png
If multiple segments have been selected then the last segment added to the selection will have the context icons. If all the segments were selected by a Double Left Click then the segment that was clicked will have the icons.


Spline Object Context Menus
SplineEndPointContextIcon S20.png  Endpoint Context Menu 
ContextMenuSplineObject S20.png
SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png  Segment Context Menu 
ContextMenuSplineSegment S20.png


 Cut  remove the selected segment or segments from the route and move them into the Scrapbook (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Copy  copy the selected segment or segments and place them into the Scrapbook (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Paste  paste the contents of the current Scrapbook at the cursor (focus) point
 Delete  delete the segment, segments or endpoint. It has the same effect as pressing the  Delete  key
 Replace Spline with Selected Asset  the highlighted spline will be replaced with the asset currently selected in the Assets Palette. If the asset selected in the Assets Palette is the wrong type (e.g. a mesh object instead of a scenery spline) then this option will be greyed out (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Smooth Ground Under Selected  changes the height of the terrain under the segment or segments to match the set height of the spline (does not work for endpoints SplineEndPointContextIcon S20.png)
 Settle on Ground  sets the height of the selected endpoint or segments to match the height of the terrain beneath them ("drops them back to earth"). When used on segments the spline will follow the height changes of the terrain
 Apply Height to this Spline Endpoint  sets the height of the selected endpoint to the value in the Tool Options Palette  Height  setting (SplineEndPointContextIcon S20.png only)
PencilTips.PNGYou can copy the Height from an existing spline endpoint into the  Height  setting of the Tool Options Palette. Once it has been copied it can be applied to any other object.
DotPoint.JPG hold down the  Alt  key and Left Click on the spline endpoint to copy its Height value. That value can then be used to set the Height of other spline endpoints
 Apply Height  sets the height of the selected segment or segments to the value in the Tool Options Palette  Height  setting (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Apply Grade to this Spline Endpoint  you must first select a segment then click on one of its endpoint icons SplineEndPointContextIcon S20.png. This sets the height of the endpoint to give a Grade to the surrounding segments that matches the value in the Tool Options Palette  Grade  setting
PencilTips.PNGYou can copy the Grade from an existing spline segment into the  Grade  setting of the Tool Options Palette. Once it has been copied it can be applied to any other object.
DotPoint.JPG hold down the  Alt  key and Left Click on the spline segment to copy its Grade value. That value can then be used to set the Grade of other spline segments
 Straighten Spline  forces a straight line (as far as possible) between the endpoints of a single segment. This option will be Tick.PNG ticked if the segment has already been straightened in which case selecting this option will "un-straighten" the segment and remove the tick (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Separate Splines  breaks two spline segments into two separate (independent) splines at the selected endpoint (SplineEndPointContextIcon S20.png only)
 Merge Splines  removes the selected endpoint between two segments and merges the segments into one (SplineEndPointContextIcon S20.png only). Two segments can also be merged by deleting a selected endpoint with the  Delete  key
 Insert Spline Point Here  splits the selected segment into two segments by adding a new endpoint at the point where the segment was clicked (SplineSegmentContextIcon S20.pngTrackSegmentContextIcon S20.png only)
 Select in Assets Palette  highlights the selected spline object in the Assets Palette
 Edit Properties  opens the Properties window of the selected spline object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Fine Adjustment: Rolling Stock Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png Rolling Stock Objects (locomotives, wagons, etc) can only be moved along the track that they are attached to. If they are moved off the track then they will immediately "snap back" to the nearest track when they are released.

 Fine Adjustment: Move Rolling Stock Objects 

Use the Fine Adjustment tool to move a selected rolling stock object along the track.

PencilTips.PNGTo move an entire consist of rolling stock objects, Double Left Click on any one of the objects in the consist to select them all and then move them as one object


FineAdjustRollingStock S20.png
link- Despite their presence in the Fine Adjustment Tool 3D Anchor Frame the  Red   Green   Blue  Rotational Anchor lines and the  Blue  Vertical Anchor Line will NOT work on Rolling Stock Objects
link- The Object Anchor (the central dot) will move the selected rolling stock object or objects in any horizontal direction but they will always be attached to the nearest track spline
link- The  Green  Horizontal Anchor Line will move the selected rolling stock object or objects along the track
link- The  Red  Horizontal Anchor Line will move the selected rolling stock object or objects horizontally off the track but they will always be attached to the nearest track spline


NotePad.PNG Notes:

It is possible to place a rolling stock object so that it "overlaps" (occupies the same space as) another rolling stock object. A large yellow X rotating above the rolling stock object is a sign of this "conflict".

  PlacementRollingStockCollision S20.png This can happen if a rolling stock object is moved off the track and released. It will instantly snap to the nearest track position even if that position is already occupied.


The simple solution is to use the Fine Adjustment Tool to move the incorrectly placed object to an unoccupied section of the track.


 Fine Adjustment: Decouple Rolling Stock Objects 

BlueDot10x10.png All decoupling operations between Rolling Stock Objects are performed using just a Left Click and Drag.


PencilTips.PNGTo decouple a string of joined rolling stock objects from a consist (for example, the first or last 5 wagons),  Shift  + Left Click on each of the objects to be selected and then drag them away from the consist


A rolling stock object or objects in the middle of a consist can also be decoupled. This will break the consist into 3 sections.

FreeMoveRollingStockCouple5 S20.png

FreeMoveRollingStockCouple5A S20.png

Steps: To decouple rolling stock from a consist:-
DotPoint1.JPG Select one (Left Click) or more ( Shift  + Left Click) rolling stock objects inside a consist
If more than one object is selected, then they:-
DotPoint.JPG do not have to be connected to each other
DotPoint.JPG should be in the same consist - the results may be "unexpected" if the objects are selected and dragged out from different consists


DotPoint2.JPG Left Click and Drag the object or objects out of the consist and onto an Unoccupied section of track
DotPoint.JPG do not release the mouse button until you have the rolling stock objects in position otherwise they will simply "snap back" to the nearest track, regardless of whether it is already occupied or not. Think of the yellow connecting line between the wagon and the track shown in the image as if it is a "stretched rubber band"
DotPoint.JPG The rotating yellow X floating above the selected and now disconnected consist in the image indicates that it has been "derailed" from the track. This will disappear when it is "rerailled" again


 Fine Adjustment: Couple Rolling Stock Objects 

BlueDot10x10.png All coupling operations between Rolling Stock Objects can be performed using just a Left Click and Drag or through the objects Context Menu.

Options:

Ablue.png Using "Click and Drag"

Consider the following simple situation:-

The guard van (caboose) standing at the rear of a consist has to be coupled to the rear gondola wagon.
FreeMoveRollingStockCouple1 S20.png

FreeMoveRollingStockCouple2 S20.png
Steps: To Couple rolling stock objects:-
DotPoint1.JPG Select (Left Click) the rolling stock object (in this case the guard van) to be coupled to a consist or another rolling stock object (in this case the gondola)
DotPoint.JPG If more than one object has to be selected then use a  Shift  + Left Click to individually select each object
DotPoint.JPG If ALL the objects in a consist have to be selected then use a Double Left Click on any object in the consist
DotPoint2.JPG Left Click and Drag the object (the guard van) along the track to its target object or consist. When dragged rolling stock objects will "drop" or lower their height a few cms
DotPoint.JPG If the selected object (or objects) is already part of a consist then dragging will decouple it from the consist before moving it
DotPoint.JPG When it reaches the target object and couples it cannot be moved any further
DotPoint3.JPG Release the object when it has coupled and it will return to its correct height


Bblue.png Using the Context Menu

Using the same situation as above, the isolated guard van and the gondola wagon at the end of a consist are to be coupled together.

FreeMoveRollingStockCouple3 S20.png
Steps:
DotPoint1.JPG Select,  Shift  + Left Click, on both objects
PencilTips.PNGThe order of selection IS important. Select the "destination" object, where the others will be coupled, last

The Context Icon will appear on the last rolling stock object selected.

DotPoint2.JPG Open the Rolling Stock Object Context Menu by choosing one of the following:-

Options:
Ablue.png Left Click on the Context Icon of the last selected rolling stock object, OR
Bblue.png press the  T  key

DotPoint3.JPG Select the option  Merge into Single Train 


There are two possible outcomes depending on which object has the Context Icon

DotPoint1RedC.png Context Icon on the Gondola Wagon

FreeMoveRollingStockCouple3A S20.png
Using the Merge into Single Train option with the Context Icon on the gondola wagon at the end of the consist. The guard van couples to the gondola wagon and the consist

DotPoint2RedC.png Context Icon on the Guard Van

FreeMoveRollingStockCouple4A S20.png
Using the Merge into Single Train option with the Context Icon on the guard van. The gondola wagon decouples from the consist and couples to the guard van


Using a more complex example involving multiple objects from several different consists. The selected wagons shown below are to form a single consist based on the loco.
FreeMoveRollingStockMultiMerge1 S20.png
The loco was the last object to be selected so it has the Context Icon. The Context Menu is opened and the option  Merge into Single Train  is selected with the result as shown below.
FreeMoveRollingStockMultiMerge2 S20.png
The wagons and loco have been combined into a single consist but not necessarily in a useful order. Left Click and Drag the incorrectly placed vehicles to their correct positions.


 Fine Adjustment: Rolling Stock Object Context Menu 

A selected rolling stock object, or a group of selected rolling stock objects, will have a Context Icon that opens a Context Menu. The icon design will vary between object types.

To open a selected rolling stock objects Context Menu choose one of the following:-
Options:
Ablue.png Left Click its Context Icon ContextIconsRollingStock S20.png OR
Bblue.png Press the  T  key


Spline Object Context Menu
ContextMenuRollingStock S20.png
NotePad.PNG Notes:

Unlike other Context Menus, the  Cut  and  Copy  menu options are not selectable for Rolling Stock Objects because these objects cannot be added to a Scrapbook. The  Save to Consist Asset...  option performs some of the Scrapbook functions for rolling stock.
 Paste  the contents of the current Scrapbook will be pasted at the cursor (focus) point
 Delete  the selected rolling stock objects will be deleted. It has the same effect as pressing the  Delete  key
 Paint Under Selected  the texture selected in the Assets Palette will be painted under the selected objects. The Tool Options Palette brush settings ( Radius  and  Sensitivity ) will control how the texture is applied. If no ground texture has been selected in the Assets Palette then this option will be greyed out.
 Smooth Ground Under Selected  changes the height of the terrain under the rolling stock object to match its set height
 Reattach to Track  this option is only selecteable if a rolling stock object has derailed
 Rotate Vehicle  rotates (reverses) the facing direction of a selected rolling stock object. If more than one object has been selected then they will all have their directions reversed but they will remain in the same order
 Change Consist Heading  reverses the consist heading as indicated by the directions of the red and green arrows above the start and end of the consist
 Rotate Consist Heading  the entire consist is reversed, both in the order of the vehicles and the direction they face
 Merge into Single Train  when two or more separate rolling stock assets have been selected they will be coupled into a single consist. See PageLink.PNG Coupling Rolling Stock Objects for more details
 Save to Consist Asset...  saves the selected rolling stock objects as a new consist asset in the Assets Palette
 Select in Assets Palette  highlights the selected rolling stock object in the Assets Palette
 Edit Properties  opens the Properties window of the selected rolling stock object
PencilTips.PNG To name (or rename) an object, select this option and enter a name in the Properties Name Entry text box. Then click the Tick.PNG button
NotePad.PNG In the current Surveyor 2.0 Beta test versions for the next Trainz Plus release, the naming of objects has been moved from the Properties Window to the Info Palette


Fine Adjustment: Object Height Problem Solutions

SkipDown.png SkipUp.png        
Two Anchor Points on the  Blue  vertical Anchor line determine the height of an endpoint or an object above the ground.
BlueDot10x10.png the height of a Rolling Stock Object (locomotive, wagon, etc) CANNOT be altered
BlueDot10x10.png the Object Height Anchor, which is normally Black but turns Green when it is selected, controls the height of the object (including spline Endpoints) above the ground. This Anchor point can be moved vertically by the tool pointer
BlueDot10x10.png the Ground Height Anchor, which is Yellow, marks the position of the object on the ground. This Anchor point cannot be moved vertically by the tool pointer but its height can be changed by setting the Tool Options Palette  Height  value
It is common for both height anchors to be at the same height but there are many situation where the two will be at different heights. The examples below show situations where the two are at different heights and the height of the Object Height Anchor will need to be adjusted.


FineAdjustSplineHeightUp.png  Object Height Above Ground Height 


Steps: To bring the object height down to the ground height:-
DotPoint1.JPG Left Click and Drag downwards on the  Blue  vertical Anchor line to bring the Object Height Anchor down to the same level as the Ground Height Anchor


PencilTips.PNGTo achieve finer and more accurate control when moving the height Anchor point, choose one of the following:-
Options:
Ablue.png zoom in closer to the Anchor point, OR
Bblue.png use the  z  fine adjustment arrows in the Info Palette object Pos controls. This can be used to set the height and position to cm accuracy (see PageLink.PNG The Info Palette below).


FineAdjustSplineHeightDown.png  Object Height Below Ground Height 


Steps: To bring the object height up to the ground height:-
DotPoint1.JPG Left Click and Drag upwards on the  Blue  vertical Anchor line to bring the Object Height Anchor up to the same level as the Ground Height Anchor

FineAdjustSplineHeightOK.png


link Where this method fails is when the height difference between the two Anchor points exceeds the length of the  Blue  vertical Anchor line so the Ground Height Anchor or the Object Height Anchor is at the very top of the Anchor line. Once it is in that position the Object Height Anchor can no longer be moved up or down because there is no vertical Anchor line to grab.



PencilTips.PNGThe Quick Solution to this problem
Steps: Use the  Settle on Ground  option:-
DotPoint1.JPG open the object or endpont Context Menu
DotPoint2.JPG select the option  Settle on Ground . For splines this option will force the spline segment to follow the contours of the ground but it will now be at the same height as the ground


A more complex alternative method is to use the Surveyor Compass Rose, the Info Palette and the Tool Options Palette.

FineAdjustSplineSetFocus.png
The Surveyor Compass Rose
Steps: Use the Compass Rose:-
DotPoint1.JPG Right Click on the terrain at a point which has the height that will be used by the object. This will position the Surveyor Compass Rose and record its data as the Focus
DotPoint2.JPG Open the Focus controls in the Info Palette by a Left Click on the small Right Arrowhead to the left of the Focus label
InfoPaletteFocusUseHeight.png The Info Palette stores the positional data, including the Height (the  z  value), of the Compass Rose under the label Focus
DotPoint3.JPG Left Click on the white Down Arrowhead next to the  z  value and select the menu option  Use Height for Brush . This will transfer the Focus  z  value to the Tool Options Palette  Height  setting
DotPoint4.JPG Open the Context Menu for the object (or spline endpoint)
DotPoint5.JPG Select the option  Apply Height  or  Apply Height to this Spline Endpoint 


The Marquee Tool

SkipDown.png SkipUp.png Top Next Up Next Down Bottom
S20 MarqueeToolIcon.png Keyboard Shortcut:  F  The  Marquee Tool  selects and copies objects, deletes baseboards, adds new baseboards and sets their properties, adds texture to baseboards in a Trainz World


Some features of this tool use the Scrapbook Palette, Assets Palette and Tool Options Palette. If these palettes are not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document.


The Marquee Tool has no drop down menu lists.

MarqueeTools S20.png
BlueDot10x10.png The Marquee Tool draws out a rectangular area, the Marquee Selection Area, on the route. Any objects (including Ground Heights, Ground Textures and Effect Layers) that are inside the Marquee Selection Area or touched by its boundary will be selected.


PencilTips.PNGYou can use the Asset Palette filters to restrict the objects that will be selected in the Marquee Selection Area


MarqueeSelectArea S20.png

In the image above:-
DotPoint.JPG a road spline at the bottom and a house at the lower left of the Marquee Selection Area have been overlain by the drawn rectangle so they have been included in the selection.
DotPoint.JPG the Marquee Selection Area was drawn from the top left to the bottom right which places the Marquee Context Icon at the bottom right of the rectangle.
DotPoint.JPG the bottom right of the Marquee Selection Area also has a 3D Anchor Frame.
DotPoint.JPG The road spline was the last object that was included in the selection area so its Context Icons are also present.


Not shown in the image, because they are not highlighted, are the Ground Heights, Ground Textures and Effect Layers that are also included in the Marquee Selection Area.

MarqueeAreaTools S20.png The Marquee Selection Area 3D Anchor Frame has some similarities to the one used with the Fine Adjustment Tool.
DotPoint.JPG the  Green  and  Red  horizontal Anchors will move the Marquee and all its contents in the Anchor direction
DotPoint.JPG the  Blue  rotational Anchor will rotate the Marquee with all its contents in the direction of the rotation movement
DotPoint.JPG there are no  Green  and  Red  rotational Anchors
DotPoint.JPG at the centre of the 3D Anchor Frame is a Select Area Anchor. Left Click and Drag this Anchor point to move the Marquee with all its contents in any horizontal direction
DotPoint.JPG each of the  Green  and  Red  horizontal Anchors has a resize Anchor, an orange coloured dot, located at its end. Left Click and Drag these Anchor points to resize the Marquee Selection Area (and its contents) in that specific direction


Steps: To Create a Marquee Selection Area:-
DotPoint1.JPG select the Marquee Tool (or press the  F  key)
DotPoint2.JPG Left Click and Drag out the Marquee Selection Area around the objects to be selected


The Marquee Tool and the Assets Palette Filter

SkipDown.png SkipUp.png        
BlueDot10x10.png The Assets Palette filter tools can be used to restrict the objects selected by the Marquee Tool.
AssetsPaletteFilterSelection S20.png
Steps: To restrict the objects selected by the Marquee Tool:-
DotPoint1.JPG set the Filter Type in the Assets Palette to  Filter Selection 
DotPoint2.JPG set the other filter options in the Assets Palette to narrow down the type of objects (e.g.  Scenery Splines  and/or enter a partial name in the Text Box)
DotPoint3.JPG select the Marquee Tool from the Tools Palette (or press the  F  key)
DotPoint4.JPG Left Click and Drag out the Marquee Selection Area around the objects to be selected
Only those objects identified in the Assets Palette filters will be selected by the Marquee


Using the Filters shown above, the Marquee Selection Area only selects scenery spline objects.

MarqueeSelectSplines S20.png

Marquee Anchor Controls

SkipDown.png SkipUp.png        

The following images demonstrate the effect of using the Marquee Anchor Controls on the image shown at the top of this section as the starting point.

 Horizontal Anchor Shift 

  The  Green  horizontal Anchor has been used to shift the Marquee Selection Area to the left. Note that the 3 trees and a small building that were on the left of the Marquee Selection Area in the image above have been replaced (overwritten) by the Marquee contents. Also note that the texture has been moved leaving a gap showing the original grid texture.  
  MarqueeSelectAreaShift S20.png
 


 Rotational Anchor Shift 

  The  Blue  rotational Anchor has been used to rotate the Marquee Selection Area about 45° anti-clockwise. Again, anything that was originally in the area now covered by the Marquee Selection Area has been replaced by the contents of the Marquee. Also note that the texture has been moved leaving a gap showing the original grid texture.  
  MarqueeSelectAreaRotate S20.png
 


 Vertical Anchor Shift 

  The  Blue  vertical Anchor has been used to lift the Marquee Selection Area upwards.  
  MarqueeSelectAreaUplift S20.png
 


NotePad.PNG Notes:

The Marquee Anchors will move:-
DotPoint.JPG the selected scenery objects. If the objects are in locked layers then they will be copied before being moved and the original objects will remain in place
DotPoint.JPG the ground textures. As shown in two of the images this will leave the original baseboard ground texture showing
DotPoint.JPG the effect layers
DotPoint.JPG the ground heights


Scrapbook Operations

SkipDown.png SkipUp.png        
NotePad.PNG Notes:

Scrapbooks, when created, will contain:-
DotPoint.JPG Ground Heights
DotPoint.JPG Ground Textures
DotPoint.JPG Effect Layers - if present
DotPoint.JPG Selected Objects - scenery items, splines, track, signals, etc
 But NOT Rolling Stock (Trains) 
Ground heights, textures and effect layers are always included in a scrapbook but you can control which visible objects are added by manually selecting them.
NotePad.PNG Notes:

Scrapbooks, when painted or pasted, can contain any combinations of:-
DotPoint.JPG Ground Heights
DotPoint.JPG Ground Textures
DotPoint.JPG Effect Layers
DotPoint.JPG Scenery Objects (Meshes) - individual buildings, trees, signals, etc
DotPoint.JPG Scenery Splines - roads, track, fences, etc
You have options in the Scrapbook Filters that will control which of these data categories are copied and how they are copied from the scrapbook into a route.


Once an area has been marked out by the Marquee Tool a number of options become available.

MarqueeEditMenu S20.png
The SurveyorEditIcon.png Surveyor Edit Menu will show some additional options specifically for the Marquee Tool:-
 Cut  the objects selected in the Marquee area (including the ground heights, ground textures and effect layers) will be copied and placed into a new Scrapbook. Any scenery objects (excluding ground heights, ground textures and effect layers) that are not in a locked layer will be removed from the Marquee area. This is the same as pressing the  Ctrl  +  X  keys
 Copy  the objects selected in the Marquee area (including ground heights, ground textures and effect layers) will be copied and placed into a new Scrapbook. This is the same as pressing the  Ctrl  +  C  keys
 Paste  the contents of the current Scrapbook will be pasted into the route at the cursor (focus) point. Which contents will be pasted and how they will be pasted are controlled by the Filters in the Scrapbook Palette (see PageLink.PNG Scrapbook Data for more details). This option will always be available with and without a Marquee area being marked if there is a scrapbook available to be pasted. This is the same as pressing the  Ctrl  +  V  keys
 Clear  the selected scenery objects that are not in locked layers will be removed from the Marquee area but NOT the selected ground heights, ground textures and effect layers. This is the same as pressing the  Delete  key
 Select None  the Marquee Selection Area boundary lines are removed from the route cancelling the selection process. Nothing that is inside the area will be removed. This is the same as pressing the  Ctrl  +  D  keys


 Adding a New Scrapbook 

BlueDot10x10.png The  Cut  and  Copy  Scrapbook operations are also found in the Marquee Context Menu (see the Marquee Context Menu section above).


PencilTips.PNGYou don't have to use the Marquee Tool to create a new Scrapbook. You can use the Free Move Tool or the Fine Adjustment Tool to select any number of objects and then press  Ctrl  +  C . The selected objects, along with the ground height, ground textures, and any effect layers, will be copied into a new Scrapbook


When a new Scrapbook is created by a  Cut  (or press  Ctrl  +  X ) or  Copy  (or press  Ctrl  +  C ), it will appear in the Scrapbook palette with some basic details.

ScrapbookNew S20.png
The newly created scrapbook will be given:-
DotPoint.JPG a name consisting of the date and time of its creation
DotPoint.JPG a thumbnail
PencilTips.PNGThe thumbnail image will be taken using the current camera POV (point of view). To get a better image adjust the camera position and view to give the best possible shot of the Scrapbook objects before giving the  Cut  or  Copy  command
DotPoint.JPG a scrapbook number (it will be inserted as №1 scrapbook)
DotPoint.JPG an expiry date which will be set 5 days after its creation - this will countdown each day until 0 when the new scrapbook will be deleted


NotePad.PNG Notes:

DotPoint.JPG Scrapbooks use very little memory so there is no real limit to how many you can store in the palette but finding the one you want will be more difficult as the list grows longer
DotPoint.JPG Rolling Stock Objects cannot be added to a Scrapbook. The rolling stock Context Menu option  Save to Consist Asset...  performs some of the Scrapbook functions for rolling stock objects and consists


PencilTips.PNG Deleting a Scrapbook after it has been pasted does not delete the objects that it has added to the route


There are two changes that can be made to the new scrapbook:-
DotPoint.JPG Give it a name - Left Click inside the Name Text Box and type a new name. To set its new name Left Click on the image (pressing the  Enter  key does not work - a known bug)
DotPoint.JPG Make it permanent - Left Click the white Pin icon (ScrapbookUnPinnedIcon S20.png) to change it to blue. The scrapbook will no longer expire but it can still be deleted at any time
Pinned scrapbooks are always shown with a blue pin icon ScrapbookPinnedIcon S20.png and the words "pinned, no expiry" displayed next to their scrapbook №
PencilTips.PNGThe Pinning of any scrapbook can be reversed so that it will then expire in 5 days time. Left Click the blue pin icon.
ScrapbookNewNamedPinned S20.png


Once a scrapbook has been Pinned it becomes an asset and will appear in Content Manager

ScrapbookEntryCM S20.png

The scrapbook can be uploaded to the DLS and saved as a CDP file.

PencilTips.PNGYou can archive your scrapbooks as CDP files to keep the number of installed scrapbooks to a minimum. If an archived scrapbook is needed then you can use the Import Content Files option in Content Manager to add it to the Scrapbook Palette. It can be deleted from the palette later, when no longer needed.


Marquee Context Menu

SkipDown.png SkipUp.png        
BlueDot10x10.png The Marquee Context Menu creates, deletes, converts and paints individual or multiple baseboards. It also creates and pastes scrapbooks.


To open the Context Menu for a Marquee Selection Area Left Click on its Context Icon MarqueeContextIcon S20.png or press the  T  key.

Marquee Context Menu
MarqueeContextMenu S20.png
 Cut  removes the objects in the selection area from the route and moves them into the Scrapbook. Ground heights, textures and effect layers will be copied, not cut. Has the same effect as pressing the  Ctrl  +  X  keys
 Copy  copies the objects in the selection area and moves them into the Scrapbook. Has the same effect as pressing the  Ctrl  +  C  keys
 Paste to Selected Area  pastes the objects in the currently selected Scrapbook into the selection area. Which objects are pasted and how they are pasted is controlled by the settings in the Scrapbook Filter. Has the same effect as pressing the  Ctrl  +  V  keys
 Delete  deletes the objects in the selection area except for the ground heights, textures and effect layers. Has the same effect as pressing the  Delete  key
 Paint Within Marquee  if a texture has been selected in the Assets Palette then that texture will be painted inside the selection area using the settings in the Tool Options Palette. If no texture has been selected then this option will be greyed out
 Set Marquee To Brush Height  changes the ground height of the selection area to the brush height in the Tool Options Palette
 Convert Baseboards To  converts the grid of the entire baseboard or baseboards covered by the selection area into the resolution selected from the two options -  5m Grid  and  10m Grid . If the selection area covers any empty spaces outside the existing baseboards then new baseboards will be created using the ground height in the Tool Options Palette. See Notes: below
 Delete Baseboards in Marquee  deletes the entire baseboard or baseboards covered by the selection area. See Notes: below
 Select in Assets Palette  identifies and selects in the Assets Palette the most common ground texture used in the selection area


NotePad.PNG Notes:

The  Convert Baseboards To  and  Delete Baseboards in Marquee  options will affect the entire baseboard or baseboards that contain the Marquee Selection Area even if the selection area only covers a small part of a baseboard.


Managing Baseboards

SkipDown.png SkipUp.png        
BlueDot10x10.png The Marquee is a powerful tool for adding, deleting and changing the properties of multiple baseboards


Marquee drawn area
Steps: To add new baseboards:-
DotPoint1.JPG select the Marquee Tool (or press the  F  key).
DotPoint2.JPG Left Click and Drag to draw out an area where the new baseboards will be added. This area can include the current baseboard.
The Marquee Selection Area, shown with a green border in the image on the left, covers the existing baseboard (black, bottom left) and where 3 new baseboards will be created. The Marquee has a Context Icon as shown in the image.
DotPoint3.JPG Left Click on the Context Icon or press the  T  key to open up the Marquee Context Menu (see Marquee Context Menu above).
DotPoint4.JPG Create, Convert, Delete
DotPoint.JPG To Create new baseboards, and to Convert selected baseboards to a different Grid Resolution, select the Context Menu option  Convert Baseboards To >  then select a resolution from two sub-options,  5m Grid  and  10m Grid . If existing baseboards have been selected then they will also be converted to the new resolution.
DotPoint.JPG To Delete baseboards select the Context Menu option  Delete Baseboards in Marquee . The  Ctrl  +  Z  keys can Undo the deletion.
DotPoint.JPG To set the selected baseboards to the  Height  value in the Tool Options Palette select the Context Menu option  Set Marquee to Brush Height . If the Marquee extends over "empty space" then new baseboards will be created at the set  Height  value.


Mass Object Moves and Clones

SkipDown.png SkipUp.png Top Next Up Next Down Bottom
PencilTips.PNGBoth the Free Move Tool and the Fine Adjustment Tool can move and clone (copy) single and multiple objects. The Marquee Tool can also move and clone objects but it will include the Ground Surface Height, Ground Textures and any Effect Layers in the cloning and moving operations.

Selecting and Moving Multiple Objects

Multiple objects can be selected and moved with the Free Move Tool and the Fine Adjustment Tool.

NotePad.PNG Notes: Mass Moves

The objects do not have to be:-
DotPoint.JPG the same type. They can be a mixture of scenery splines and mesh objects
DotPoint.JPG in the same layers but objects in Locked layers cannot be moved
PencilTips.PNGYou can also use the Marquee Tool to move objects but this will move Ground Heights, Ground Textures and Effect Layers as well as objects.


MultipleSelectionGroup S20.png
Steps: To select multiple objects:-
DotPoint1.JPG Select the Free Move Tool or Fine Adjustment Tool
DotPoint2.JPG  Shift  + Left Click on every object that is to be included in the selection group


PencilTips.PNGYou can apply the  Height  setting in the Tool Options Palette to the entire group of selected objects.
MultipleSelectionGroupMove S20.png
Steps: To move multiple objects:-
DotPoint1.JPG Left Click and Drag the selected objects in the required direction
DotPoint2.JPG Release the mouse button when the group of objects are in position


PencilTips.PNGThe Fine Adjustment Tool  Blue  Rotation Anchor can be used to rotate all the members of the group with the last selected object (the one with the Context Icon) as the centre of rotation


 Selecting Multiple Identical Objects 

You can quickly select all nearby identical objects by a Double Left Click on an object.

PencilTips.PNGThis also applies to all the wagons in a consist. Double Left Click on any one of them to select all of them - they do not have to be identical wagons.


A forest of many different trees. Only one has been selected. Double Left Click on a tree to select all the identical trees in the forest.
MultipleSelectTip1 S20.png MultipleSelectTip2 S20.png


PencilTips.PNG Shift  + Double Left Click on another object. It and all its identical copies will be added to the selection.


Cloning Objects

SkipDown.png SkipUp.png        
BlueDot10x10.png You can easily clone single and multiple selected objects. If you have selected a group of objects they do not have to be the same type - you can select scenery objects and scenery splines.


NotePad.PNG Notes: Layers and Cloning

DotPoint.JPG the objects can be in different layers
DotPoint.JPG the layers can be locked and the objects will still be cloned
DotPoint.JPG all the cloned objects will be placed into the current Active Layer which must be Unlocked
For more information on layers see PageLink.PNG The Info Palette at the end of this document.


Steps: To clone an object or a group of objects:-
DotPoint1.JPG use either the Free Move Tool or the Fine Adjustment Tool to select the object or objects
DotPoint2.JPG  Ctrl  + Left Click and Drag on any of the selected objects
FreeMoveCloneSelect S20.png FreeMoveCloneMoved S20.png


The Info Palette

SkipDown.png SkipUp.png Top Next Up   Bottom
If the Info Palette is not visible on the screen then refer to PageLink.PNG Notes: Palettes at the top of this document. Some Info Palette functions will also require the Assets Palette and the Tool Options Palette.


This palette can be easily overlooked but it has some very useful features:-
BlueDot10x10.png providing precise data and control over the "focus" - the position of the cursor
BlueDot10x10.png providing precise data and control over the position and orientation of objects (it can be used instead of the Free Move Tool and the Fine Adjustment Tool)
BlueDot10x10.png identifying and setting the "home" layer and binding layer of a selected object
BlueDot10x10.png used for locking and unlocking a selected objects layer

Palette Coordinates

The components of the Info Palette are identified in the image below.

InfoPalette S20.png Each of the small arrowhead icons will open the palette to display more information and some controls.


NotePad.PNG Notes:

All the positional data and controls in the Info Palette are defined in the following ways:-

 x  is ALWAYS the  North-South  compass direction regardless of the direction that an object is facing
 y  is ALWAYS the  East-West  compass direction regardless of the direction that an object is facing
 z  is ALWAYS the  Vertical  direction (perpendicular to the compass directions) regardless of how an object has been rolled or tilted

DotPoint.JPG distances are measured in metres from the North-West corner of the first baseboard. If that baseboard is later deleted then distances will still be measured from its original and now "virtual" North-West corner.
DotPoint.JPG  +  positive distances are in the  South  and  East  directions
DotPoint.JPG  -  negative distances are in the  North  and  West  directions
DotPoint.JPG New boards added to the North of the first baseboard will have negative x coordinates and new boards added to the West of the first baseboard will have negative y coordinates.


Info Settings Menu

SkipDown.png SkipUp.png        

All the Focus, Position and Rotation settings have drop down menus that allow values to be transferred to and from other settings and other tools.

InfoPaletteSettingDropMenu1 S20.png

InfoPaletteSettingDropMenu2 S20.png
Steps:
DotPoint1.JPG Right Click inside an Info Palette setting box
The first time the popup menu is opened it will only show two active options - Paste and Select All.
 Paste  will paste the contents of your Operating System (Windows, MacOS) clipboard into the setting. If data is already present then the new data will be added to it, not replace it
 Select All  will highlight the contents of the selected setting. You can also achieve this with a Left Click and Drag across the contents of the setting
DotPoint2.JPG Right Click inside the same Info Palette setting box
Once the value in a setting has been selected (highlighted) the popup menu will show all options as active.
 Cut  will copy the contents of the selected setting into your Operating System clipboard. The contents will then be deleted from the setting
 Copy  will copy the contents of the selected setting into your Operating System clipboard without deleting it
 Delete  will delete the contents of the selected setting. You can also achieve this with a Left Click and Drag across the contents and then press the  Delete  key


Next to the z co-ordinate in both the Focus and Position is a small white down arrowhead. Left Click on the arrowhead to open its menu.

InfoPaletteFocusMenu S20.png There is only one option in the sub-menu.
Left Click on the  Use Height for Brush  option to copy the current z value to the Tool Options Palette  Height  setting.


Focus Info and Controls

SkipDown.png SkipUp.png        
BlueDot10x10.png The Focus shows the current position and height of the Cursor object.

Open up the Focus by a Left Click on its arrowhead icon.

PencilTips.PNGBefore changing the cursor position with the Focus controls, set a Bookmark at its current position.


InfoPaletteFocus S20.png


The current cursor position is shown in the x, y and z text boxes. These values can be edited to move the cursor to a new position but CARE will be needed.

PencilTips.PNGOn the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the position in smaller increments down to centimetres


NotePad.PNG Notes:

If you enter an x or y value that is "out in empty space" (beyond the edge of a boundary baseboard) then the cursor will be refocused at a point on the baseboard edge that is the closest to the entered co-ordinates.


PencilTips.PNGIf it has not been deleted you can identify the original (first) baseboard by entering 0 as the Focus  x  and  y  co-ordinates


Asset Name Menu

SkipDown.png SkipUp.png        
BlueDot10x10.png "Name" refers to the name of the asset as displayed in the Assets Palette and in Content Manager
BlueDot10x10.png To name or rename a selected object in the current release of Trainz Plus open its Context Menu (Left Click on its icon or press the  T  key) and select the  Edit Properties  option


You must have an object (or objects) selected for a name to be shown and for this menu to be available.

InfoPaletteMulti S20.png If more than one object has been selected then the name and position data shown will be for the last selected object. If different objects (with different kuid codes) have been selected then a count of the additional objects will be added. The (+2) shown in the object name in the image on the left indicates that 2 additional different objects are in the group of selected objects.


Next to the objects name is a small white Down Arrowhead. Left Click on the arrowhead to open its menu.

InfoPaletteMenu S20.png
Asset Name Menu Options
 Copy   NOT WORKING  (a known bug) - copies the objects text details into your Operating System Clipboard for pasting, for example, into a text editor
 Show Asset Details  opens a new window showing the image and description of the selected object
 List Assets in New Window  opens up Content Manager and lists all the selected objects
 Add to Picklist  adds selected objects to a Picklist
 Remove from Picklist  removes selected objects from a Picklist (objects must already be in a Picklist)
 Select in Assets Palette  selects and highlights the selected object in the Assets Palette


Position Info and Controls

SkipDown.png SkipUp.png        

You must have an object (or objects) selected for the position data to be shown and edited. Open up the position data by a Left Click on its Pos: arrowhead icon.

InfoPalettePos S20.png The position of the selected object (or the last object if more than one is selected) is shown in the x, y and z text boxes. These values can be edited to move the object or objects to a new position but CARE will be needed.


PencilTips.PNGOn the right of each data entry box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the position in smaller increments down to centimetres


NotePad.PNG Notes:

If you enter an x or y value that is "out in empty space" (beyond the edge of a boundary baseboard) then the objects will be moved to that position and may vanish from view. The Undo command can be used to reverse the move or the Marquee Tool can be used to add a baseboard under the "floating" objects.


Rotation Info and Controls

SkipDown.png SkipUp.png        

You must have an object (or objects) selected for the rotation data to be shown and edited. Open up the rotation data by a Left Click on its Rot: arrowhead icon.

InfoPaletteRot S20.png The rotational orientation of the selected object (or the last object if more than one is selected) is shown in the r, p and y text boxes (the letters stand for Roll, Pitch and Yaw). These values can be edited to rotate the object or objects in 3D space BUT not all objects can be rotated in certain directions.
NotePad.PNG Notes:

DotPoint.JPG If several objects have been selected then the last selected object, the one with the Context Icon, will be the centre of all rotations.
DotPoint.JPG Not all objects will allow rotations. For example, SpeedTree objects can only be rotated using the  y  value ( r  and  p  entries will be ignored) while Spline objects cannot be rotated at all


PencilTips.PNGOn the right of each box is a pair of Up/Down arrow controls. Left Click and Drag up or down on these to adjust the rotation angle in increments of 1°.


NotePad.PNG Notes:

The rotation data and controls are defined in the following ways:-

 r  ALWAYS rotates in the vertical plane around the selected objects Y axis (which was defined when it was created).
This is the same as the  Red  Rotational Anchor in the Fine Adjustment Tool
 p  ALWAYS rotates in the vertical plane around the selected objects Y axis PLUS 90°.
This is the same as the  Green  Rotational Anchor in the Fine Adjustment Tool
 y  ALWAYS rotates in the horizontal plane around the compass Z or Vertical axis regardless of how the object has been rolled or pitched.

This is similar to but NOT exactly the same as the  Blue  Rotational Anchor in the Fine Adjustment Tool

 Rot:   y  = East 90° North 180° West 270° South
Original
RotationAxis S20.png
Roll:  r = 45 
RotationAxisRoll S20.png
Pitch:  p = 45 
RotationAxisPitch S20.png
Yaw:  y = 45 
RotationAxisYaw S20.png
 

DotPoint.JPG Some objects (for example: SpeedTrees) will NOT allow Roll or Pitch rotations
DotPoint.JPG all angles are measured in degrees
DotPoint.JPG  +  positive angles are anticlockwise when viewed facing the rotation axis direction
DotPoint.JPG  -  negative angles are clockwise when viewed facing the rotation axis direction
DotPoint.JPG angles greater than 360° can be entered but will give the same result as the angle minus 360°. For example: 450° is exactly the same angle as 90° (450°-360°=90°)
DotPoint.JPG clockwise and anti-clockwise angles are complementary. For example: entering -270° (clockwise) will give the same angle as entering +90° (anticlockwise)


Layer Info and Controls

SkipDown.png SkipUp.png        

You must have an object (or objects) selected for the layer data to be shown and edited. Open up the layer data by a Left Click on its Layer: arrowhead icon.

NotePad.PNG Notes:

DotPoint.JPG the Info Palette is best used to show and edit the layer and binding layer assignments of individual selected objects
DotPoint.JPG operations such as creating, deleting, merging, renaming, moving and hiding layers are performed using the Layers Palette
DotPoint.JPG layers can be Locked and Unlocked using the Info Palette or the Layers Palette but the Layers Palette is often the better choice for these tasks


InfoPaletteLayer S20.png This will show the:-
DotPoint.JPG current layer assigned to the selected object
DotPoint.JPG its assigned Binding Layer (if any)
DotPoint.JPG the Locked or Unlocked state of the assigned layer
  InfoPaletteLockedLayerBtn S20.png Layer is currently Unlocked. Click this button to Lock the layer
  InfoPaletteUnlockedLayerBtn S20.png Layer is currently Locked. Click this button to Unlock the layer
  Using this button will also change the Locked or Unlocked padlock icon shown next to the layer name in the Layers Palette
AssetsPaletteLockedUnlockedLayers S20.png
NotePad.PNG Notes:

DotPoint.JPG Objects in a Locked Layer cannot be deleted or moved
DotPoint.JPG Locked Layers can be deleted, moved and merged with other layers


InfoPaletteLayersMulti S20.png If multiple objects from different layers have been selected then no layer name will be shown in the Layer and Binding boxes. Instead they will be left "blank" as shown in the image on the left.

Both boxes can still be opened to assign layers to objects.

Stop.PNG WARNING:
DotPoint.JPG Setting a layer for multiple objects that are in different layers will move ALL those objects to that layer
DotPoint.JPG If objects are moved from one layer group to another (such as from the Route Layers to the Session Layers) then it will change where those objects are saved (in the Route or in the Session)


Assigning Objects to a Different Layer

SkipDown.png SkipUp.png        

A selected object or group of selected objects can be assigned to a different layer. If multiple objects have been selected then they do not have to all be in the same layer.

InfoPaletteLayerDropBoxList S20.png
Steps: To change the assigned layer of an object or group of objects:-
DotPoint1.JPG Left Click on the Layer drop down box. The layer containing the object (for a single selected object only) will be shown with a BulletTick.png in front of its name
DotPoint2.JPG Select the destination layer name from the drop down list. See Warning above
The layer reassignment will start the instant the destination layer is selected
DotPoint3.JPG If you see a Debugging Window on the screen as the task is processed, it will inform you when the task has been completed. You can then close the window


NotePad.PNG Once a target layer has been selected then the  Select Layer  button, which sets the Active Layer, will become active IF the target layer is not the Active Layer. A Left Click on this button will set it as the Active Layer.


BlueDot10x10.png The Active Layer is the layer used by the Placement Tool when objects are added to a route (or session). This button gives you the opportunity to set the Active Layer to the same layer that you just used to assign to an object. Its use is optional.


PencilTips.PNGYou can also set the Active Layer by selecting its name from the list in the Layers Palette.


Options: To set current layer to the Active Layer:-
Ablue.png If the  Select Layer  button is greyed out
InfoPaletteLayerSelectBtnOff S20.png then the selected object is now assigned to the current Active Layer so there is no need to use this option
Bblue.png If it is NOT greyed out
InfoPaletteLayerSelectBtnOn S20.png then the selected object is now assigned to a layer that is not the current Active Layer. Left Click on the  Select Layer  button to switch the Active Layer to the same layer as the object


Assigning Objects to a Binding Layer

SkipDown.png SkipUp.png        
BlueDot10x10.png The Binding Layer, or Bound Layer as it is also called, is a tool used in the development of a route or session. It allows you to temporarily assign an object to a second layer while it is still in its original layer. The object will then take on the properties (Locked or Unlocked, Hidden or Visible) of both layers.
Assigned
Layer
Binding
Layer
Object
Status
LayerUnLocked S20.png Unlocked LayerUnLocked S20.png or None LayerUnLocked S20.png Unlocked
LayerLocked S20.png LOCKED LayerLocked S20.png or LayerUnLocked S20.png or None LayerLocked S20.png LOCKED
LayerUnLocked S20.png Unlocked LayerLocked S20.png LOCKED LayerLocked S20.png LOCKED
LayerEyeOpen S20.png Visible LayerEyeOpen S20.png or None LayerEyeOpen S20.png Visible
LayerEyeClosed S20.png HIDDEN LayerEyeOpen S20.png or LayerEyeClosed S20.png or None LayerEyeClosed S20.png HIDDEN
LayerEyeOpen S20.png Visible LayerEyeClosed S20.png HIDDEN LayerEyeClosed S20.png HIDDEN
In Summary:-
DotPoint.JPG If the Assigned Layer or the Binding Layer of an object is Locked then the object will be Locked
DotPoint.JPG If the Assigned Layer or the Binding Layer of an object is Hidden then the object will be Hidden
NotePad.PNG Notes:

DotPoint.JPG Objects in a Hidden Layer cannot be seen and therefore, cannot be selected, deleted or moved
DotPoint.JPG The Layers Palette is the ONLY way to create, delete, name and hide layers


Some examples of using the Binding Layer:-
 Example 1: 
The problem: You need to stop an object from being selected so that you can you move other objects on or around it
The solution: Use the Layers Palette to create a new empty layer and lock it. Set the Binding Layer of the object to the new locked layer. The object will then be locked so it cannot be selected or moved even though its original layer is unlocked. When the edit has been completed delete the empty locked layer you just created to unlock all its bound objects and remove all their bindings
 Example 2: 
The problem: A group of objects (e.g trees) are blocking access to another object.
The solution: Use the Layers Palette to create a new empty layer and hide it. Set the Binding Layer of the blocking objects to the new hidden layer. The blocking objects will no longer be visible and cannot be selected even though their original layer is still visible. When the edit has been completed delete the empty hidden layer you just created to make all its bound objects visible and remove all their bindings


InfoPaletteBindingDropBox S20.png
Steps: To change the assigned binding layer of an object or group of objects:-
DotPoint1.JPG Left Click on the Binding drop down box. If the object is already bound to a layer (for a single selected object only) the binding layer will be shown with a BulletTick.png in front of its name
DotPoint2.JPG Select the Binding layer name from the drop down list. Note: the objects assigned layer will not appear in the list because an object cannot be bound to its own layer
The layer reassignment will start the instant the layer is selected
DotPoint3.JPG If you see a Debugging Window on the screen as the task is processed, it will inform you when the task has been completed. You can then close the window


As an example, the image below shows what you will see for a single object that has had:-
InfoPaletteLayerSetBindingSet S20.png
DotPoint.JPG its assigned layer changed (in the example from "route-layer" to "Station Buildings")
DotPoint.JPG its binding layer set (in the example to "Multi Industries")
DotPoint.JPG the newly assigned layer is not locked so you have the option to lock it
DotPoint.JPG the newly assigned layer is not the Active Layer so you have the option to make it the Active Layer


LinkWiki.PNG

More information on creating, editing and using Layers can be found on the Trainz Wiki at:-

How to Use Layers


  SkipUp.png Top Next Up    


Trainz Wiki

TrainzWiki.png

More Tutorials and Guides to Using Trainz


This page was created by Trainz user pware in January 2023 and was last updated as shown below.


Personal tools