SAR Scenario Peterborough-Quorn Grain V2

From TrainzOnline
Revision as of 09:46, 11 June 2024 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png
 10 
  11   Peterborough-Quorn Seasonal Grain 

A scenario in the SAR Peterborough Base Session v2.0

This scenario has been updated in V2.0. For the original V1.0 scenario, click here
ArrowRightBtn.png
 12 
Empty grain seasonal service from Peterborough to Orroroo or Quorn returning loaded to Peterborough. Bottom

 The Historical Bit 

The Peterborough-Quorn Line marked a dividing line in agriculture in the state. To the west there was enough rain to grow one crop of grain each year. To the east the rainfall was insufficient and the land was only suitable for grazing. The grain facilities on the line were at Peterborough, Orroroo and Quorn. Grain traffic was seasonal and often dictated by demand with grain trains often running only between Peterborough and Orroroo.

By 1970 all steam hauled services had been replaced by an 830 class diesel. The last revenue trains ran from Peterborough to Orroroo in October 1988 to clear the grain silos before the line was closed.

 When, Where and With What 

Grain Run
 Era:  1920s to 1988
 Duration:  2 hours 30 minutes
 Loco:  The Loco Roster Label.png has locos available at the  Peterborough Loco Depot 
 Consist:  To be attached to the selected loco
  • 7 WHE Gondola covered wagons on the Peterborough  Grain & Flour Mill  Siding
  • 1 Guard Van at the  Car Shed 

 Similar/Related Scenarios 

 18   Gladstone Pickup Grain  24   Peterborough Dieselisation  


Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of the selected loco - e.g. SAR 858. Click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR 858) OR
    • the driver icon (named Driver 858) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco
  3. Take a few moments to get your bearings. Click Peterborough Data (this link will open in this window) to show the location details and track plans for Peterborough. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location details page has direct links to the adjacent locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to Trainz Driver Mode
  7. Close the opening message window and, if Pause is shown on the screen, press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:

At Peterborough:-

  1. Move your selected loco onto the Peterborough  Grain & Flour Mill Siding and couple to the WHE wagons stored there
  2. Shunt the consist into the yard and attach a guard van to the rear
  3. Move the train onto the Peterborough-Quorn Line and proceed to Orroroo or Quorn according to the timetable

At Orroroo:-

  1. move the train onto the  Goods  road to the  Grain Silos  for loading. Notes:
    • stop the WHE wagons and Guard Van so that they are clear off the  Goods Crane 
    • the WHE wagons are not industry enabled and will not actually load but because they are covered this issue will not be noticeable
  2. Run the loco around the train to attach to the Guard Van at its rear
  3. Detach the Guard Van from the WHE wagons and shunt the van onto the  Goods Loop . Position it alongside the Goods Shed
  4. Turn the loco on the  WYE . Notes:
    • The  WYE  was actually removed in the 1930s so in reality the loco would have to run "tender first" (or "long nose first" in the case of a diesel) back to Peterborough - which was not popular with the train crews but is an option you can use
  5. Coal and water (if needed) at the Orroroo  Loco Coal & Water  Stage.
  6. Attach the loco to the southern (Peterborough) end of the WHE wagons at the  Grain Silos .
  7. Shunt the train onto the  Goods Loop  and couple it to the Guard Van

At Quorn:-

  1. move the train onto a vacant yard road and detach the guard van
  2. shunt the WHE wagons onto the Grain Siding to the solos. The WHE wagons are not industry enabled and will not actually load but because they are covered this issue will not be noticeable
  3. return the wagons to the yard road
  4. shunt the guard van to the opposite end of the consist
  5. take the loco to the 'Depot to coal and water (if appliciable) and to turn on the turntable
  6. when ready to depart couple the loco to the Peterborough end of the consist

From both Quorn and Orroroo:-

  1. Proceed onto the main line to Peterborough according to the timetable. From Quorn stopping aa required to coal and water as necessary
  2. at Peterborough proceed to a vacant  Yard  road
  3. Run the loco around the train and attach to the Guard Van at its rear
  4. Shunt the Guard Van onto a vacant road in the  Car Shed 
  5. Reattach to the WHE wagons and shunt the train to the Peterborough  Grain & Flour Mill  Siding
  6. Detach the loco and return it to the Main  Loco  Depot
Logo
The Base Session has the clock set to start at Clock 0800.png
This can be changed to any required time. For the details see WikiLink.PNGSAR Scenario Session Time Change
Peterborough-Orrorro-Quorn Grain Timetable
Seasonal Service
  Era 1920-69
Steam
1970-88
Diesel
 
  Frequency
Train №
(T Th Sa)
141
(M to Sa)
142
(M F)
D1
(W Sa)
D7
Only runs on days when required
Peterborough Depot CEFJØWX dep  05:45  08:30  07:30  07:30  
Flour Mill       A     A     A     A Attach WTE wagons
Yard       A     A     A     A Attach Guard Van
  dep  06:00  08:45  08:00  08:00  
Black Rock UX    06:27  09:12      
Orroroo Yard CΔFWX arr  06:40cw  09:231    08:40  
Silos        Dcw       D Detach wagons
  dep  07:10    08:40    
Eurelia FWX arr  07:40w          
  dep  07:46    09:09      
Carrieton CFWX arr  08:062        
  dep  08:50    09:29    
Hammond UWX dep  09:27w    10:02    
Bruce UX dep  10:003        
Quorn Yard CEFJØWX arr  10:30    10:47   Detach guard van
Silos       D       D   Detach wagons
Depot      cwS       S   Service & stable loco
Frequency
Train №
(T Th Sa)
441
(M to Sa)
440
(M F)
D2
(W Sa)
D8
Only runs on days when required
Quorn Depot dep  13:10    12:10    
Yard   dep  13:40A    12:30A   Attach wagons
Bruce dep  14:104        
Hammond dep  14:28w    13:15    
Carrieton arr  15:06cw    13:48    
  dep  15:25        
Eurelia arr  15:45w    14:08    
  dep  15:55        
Orroroo arr  16:25cw    14:37    
Silos         A       A Attach wagons
  dep  16:35  13:30    12:00  
Black Rock  16:48  13:42      
Peterborough Yard arr  17:15D  14:10D  15:17D  12:40D Detach Guard Van
Flour Mill       D     D     D     D Detach WTE wagons
Depot      cw    cw     S     S Stable loco
bold time = arrive/depart time plain time = timing point
Service Symbols:
a on request stop c coal (if required) w water (if required) A Attach wagons D Detach wagons
1, 2 cross train 402/422 3 cross train 400 4 cross train 171  
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals J = Junction
Ø = Loco Turntable U = Unattended W = Loco Water Tank X = Crossing Loop
Strip Map
Route Key

Strip Map 2

Driving Notes:

A summary of the facilities and product loads at all locations along the line is provided in the link Port Peterborough-Quorn Line

  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • The curves between Wallaway and Eurelia and some bridges have posted 20 mph speed restrictions.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.
Links: All links will open in this window
ArrowLeftBtn.png
 10 
Scenarios
Scenario Index
Location Index
Location Index
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock List
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png
 12 

This page was created by Trainz user pware in March 2021 and was last updated as shown below.


Personal tools