How to Use S20 Tools

The information in this Wiki Page applies to Surveyor 2.0 (S20) as found in Trainz Plus.

This document is  under development 

In Summary:

The Tools Palette

Notes: Palettes If the Tools Palette is not shown on the screen, then:- 1. open the Window Menu from the menu icons at the top of the screen   visible palettes with have ticks next to their names 2. Left click on the item Tools Palette   this will add a tick and make the Tools Palette visible 3. make sure that the Tool Options Palette is also visible

The Brush Tool

Keyboard Shortcut:  W  The Brush Tool is used for painting the route. It can:- adjust the height of the terrain add ground textures add Effect Layers add Scrapbook scenes When selected, the Brush Tool will show two drop down menu lists.

The first drop down menu will set the Brush Target, the type of brush. The Targets are:-
Ground Height Ground Texture Scrapbook Data <List of Effect Layers> Edit Effect Layers		If you have any Effect Layers then they will appear as Targets in this drop down list. Select an Effect Layer to use the brush to paint with that effect.

 Ground Height 

This brush tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to  Notes: Palettes at the top of this document.

When the Ground Height Target is selected, the second drop down box will give a choice of several Ground Height tools. The choices are:-
Height Up Height Down Set Height Grade

The available brush tool options are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored, but they can still be edited.
Height Up/Height Down	Set Height	Grade	Radius  the brush radius (metres) - see Notes: below Range:  5m and above  Height  the brush height (metres) Range:  -3000m to 3000m  Sensitivity  the rate at which the height changes Range:  1% (very slowly) to 100% (very fast)  Grade  slope gradient - see Notes: below Range:  0% = flat ("Plateau" in Classic) to   ±100% = steep (but not vertical)  Angle  grade direction (compass degrees) Range:  0° (North) to ±359° a negative value reverses the grade

Notes: Unlike Surveyor Classic, there appears to be no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. However, if you are using the brush to set an entire baseboard, or many baseboards, to a specific height then the Marquee Tool may be a better choice. The  Grade  may cause some confusion. It is defined as height (vertical) over distance (horizontal) converted to a percentage figure. So a grade of 100% (the maximum allowed) would mean a slope formed by the height and distance both being the same value (e.g. a height increase of 50m over a distance of 50m). A vertical slope (a cliff) would have an infinite grade which is currently impossible in Surveyor.

 Ground Texture 

This brush tool uses the Tool Options Palette. If this palette is not visible on the screen then refer to  Notes: Palettes at the top of this document.

When the Ground Texture Target is selected, the second drop down box will be disabled - there are no brush texture tool choices.

The available brush tool options are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored, but they can still be edited.

Radius  the brush radius (metres) - see Notes: below Range:  5m and above  Sensitivity  texture transparency Range:  1% = almost transparent to   100% = solid (opaque)  Rotation  initial rotation angle - see Notes: below Range:  0° to ±360° (larger angles can be entered)  Scale  the texture pattern scaling factor Range:  0.01% = smallest to 100% = full size

Notes: Unlike Surveyor Classic, there appears to be no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. If you are using the brush to paint an entire baseboard, or many baseboards, then the Marquee Tool will be quicker but it will not give the options of changing the scale and rotation. The  Rotation  controls the starting angle for the texture when painting and is often used to avoid pattern repetition. As in Surveyor Classic, holding down the  [  or  ]  keys while painting will continuously change the rotation angle. Warning: Changing the rotation angle during painting is not recommended for PBR Textures as this will significantly increase the memory useage (each rotation will load in another copy of the PBR texture).

 Scrapbook Data 

This brush tool uses both the Tool Options Palette and the Scrapbook Palette. If these palettes are not visible on the screen then refer to  Notes: Palettes at the top of this document.

The Scrapbook Brush  When the Scrapbook Data Target is selected, the second drop down box will give a choice of two Scrapbook Data tools. The choices are:-
Scrapbook Brush Scrapbook Clone

Scrapbook Brush  will resize the scrapbook contents to fit the selected brush shape and size. If the brush is small then the scrapbook contents will be compressed closer together If the brush is large then the contents will be spaced further apart Every Left Click will paste another complete scrapbook copy The Scale control in the Tool Options Palette is ignored.  Scrapbook Clone  will paste the scrapbook at its original size - subject to the Scale setting. If the brush is the same size as the original scrapbook then a single exact copy will be pasted If the brush is smaller than the original scrapbook size then only the central part of the scrapbook will be revealed and more will be added when the brush is moved around until the "painted" area reaches the size of the original. Further painting will clone or tile the scrapbook contents If the brush is larger than the original scrapbook size then the contents will be cloned or tiled to fill the set brush size The Scale control is not ignored but selecting extremes (e.g. a very large brush and a very small scale value) can cause problems (e.g. system "lockup" while it attempts to scale and clone the scrapbook contents)

The available brush tool options are shown in the Tool Options Palette with a  Gold  coloured icon next to their names. Those options that have their icon greyed out will be ignored, but they can still be edited.
Scrapbook Brush	Scrapbook Clone	Radius  the brush radius (metres) - see Notes: below Range:  5m and above  Rotation  initial rotation angle (degrees) - see Notes: below Range:  0° to ±360° (larger angles can be entered)  Scale  the scrapbook scaling factor Range:  0.01% = smallest to 100% = full size  Shape  brush shape Options:  Circle and Square will set the brush to the selected shape   Natural will set the brush to the same shape as the Marquee that created the scrapbook, which may be rectangular. The Radius setting will set the relative brush dimensions

Notes: Unlike Surveyor Classic, there appears to be no upper limit to the brush  Radius . Brushes of hundreds of metres (even kilometres) in size are possible. The  Rotation  controls the starting angle for pasting the scrapbook objects. In Surveyor Classic you could only rotate and paste in 90° increments. In S20 you can rotate and paste at any angle.

The Scrapbook Palette

Scrapbook Pasting Options   What Features to Paste      Ground Height  terrain height(s) used in the scrapbook     Texture  textures used in the scrapbook     Meshes  scenery assets (e.g. trees, buildings) used in the scrapbook     Splines  spline assets used in the scrapbook     Effect Layers  effect layers (TurfFX, Clutter) used in the scrapbook  How to Paste Each Feature     None  do not paste this feature     Add  add this feature to those already present     Overwrite  use this feature to replace those already present For the Ground Height feature:-     Absolute  use the ground heights in the scrapbook to replace the existing ground heights     Relative  modify the existing ground heights according to those used in the scrapbook (to ignore the scrapbook ground heights completely select the option None)

 Edit Effect Layers... 

When this Target is selected, the Edit Effect Layers options will appear. This is the same as selecting Edit Effect Layers ... from the Trainz Edit Menu.

If no Effect Layers are present then you can create a new one

If Effect Layers are present then select one to edit

More information on creating and editing Effect Layers can be found on the Trainz Wiki at:- TurfFX_Effect_Layer Clutter_Effect_Layer Water_Effect_Layer

The Placement Tool

Keyboard Shortcut:  E  The Placement Tool is used to add assets to the route. This tool uses the Assets Palette. If this palette is not visible on the screen then refer to  Notes: Palettes at the top of this document. The first step is to identify and select the particular asset that you want to add to the route. In the Asset Palette either:- Left click on an asset selection icon all ground textures all non-spline scenery objects all spline scenery objects all track spline objects all track objects (signals, etc) all rolling stock all Effect Layer presets OR Left click the Content Drop-down Box Then select Track Objects  Shortcut  If you already have the same asset placed in your route then:- select the Eyedropper Tool in the Tools Palette (or press the  R  key) Left click on the existing asset object This will instantly select that particular asset in the filter list. Jump to Step below. To narrow down the filter list type part of the asset name into the Search Text Box. For example if you have selected Track Objects and want to find "Trackmarks", then type "mark" (UPPER/lower case does not matter). This will list all the Track Objects containing the text "mark" in the filter list. Select the item Track Mark. If you are not sure about an asset then double-click on the name to bring up its image and description. The final step is to place the selected object into the route. Click the Placement Tool or press the  E  key Click on the spot where you want to place the object The Placement Tool will remain on and active until another tool has been selected. So everytime you click another copy of the asset (or another asset if you change your selection) will be added to the route. Notes: To delete an asset:- if the asset is not already selected (highlighted in green) then:- select either the:- Free Move Tool (or press  S ) or Fine Adjustment Tool (or press  D ) Left click on the asset to be deleted press the  Delete  key The Eyedropper Tool Keyboard Shortcut:  R  The Eyedropper Tool is used to identify objects that are in the route. The objects can be textures, effect layers, scenery, rolling stock, track. track equipment, and splines. This tool uses the Assets Palette. If this palette is not visible on the screen then refer to  Notes: Palettes at the top of this document. Quick Steps With the Eyedropper Tool selected, move the mouse pointer (which will now be an eyedropper symbol) onto any object in view. The object will be identified by its asset name appearing in a  ToolTip  below the mouse pointer (image shown left). Leave the mouse pointer in place for a few seconds and additional information about the asset will be shown, its <kuid> code and Author (image shown below left). Left click on the asset to select it in the Filter List. The type of asset and its name will be automatically selected in all the Asset Palette filters as shown in the image left. The asset is now ready for use by the Placement Tool Narrowing the Search Sometimes (or often) a scene will be too crowded with different scenery assets to be able to use the Eyedropper Tool to easily select a single object. In these cases additional options are available to help "remove the clutter". At the top of the Assets Palette is a drop down box which controls how the Eyedropper Tool works with the filters that you set. The drop down box will provide three options:- Filter List Filter Selection Filter Visibility These options work with the Asset Filters to help narrow the search for a specific asset or type of asset that is in the route.  Filter List  this option will have no effect on the operation of the Eyedropper Tool or on the assets displayed on the screen. It is the default setting and any selections made with the eyedropper will be shown in the Assets Palette as described in the section Quick Steps above.  Filter Selection  this option will restrict the Eyedropper Tool to only working on those assets that are in the filtered list. Assets that are not in the filtered list cannot be selected and will not have their details (name, <kuid>, author) displayed on the screen.  Filter Visibility  this option will hide all assets that are not in the filtered list. The only exceptions are Ground Textures and Effect Layers which will be visible but, unless they are also in the filtered list, cannot be selected. As an example the following images show the progressive application of a Visibility Filter. No filter has been applied. All the assets are visible on the Surveyor screen. ALL assets can be selected by the Eyedropper Tool The Visibility Filter option has been applied and the filtered list has been set to display only Scenery Splines. All assets except Scenery Splines, Ground Textures and Effect Layers are now hidden. Only Scenery Splines can be selected by the Eyedropper Tool. An additional filter has been applied. The word "fence" has been added to the search text box. All Scenery Splines that do not have the text "fence" in their names have now been hidden. Only the remaining visible Scenery Splines can be selected by the Eyedropper Tool. The Free Move Tool Keyboard Shortcut:  S  The Free Move Tool is used to move objects around the route in the XY (horizontal) directions only. This tool uses the Tool Options Palette and the Info Palette (to display data only). None of the controls in the Tool Options Palette are active. If these palettes are not visible on the screen then refer to  Notes: Palettes at the top of this document.  For Scenery Objects  Select the Free Move Tool. Select (Left click on) the object. Use the mouse (Left button held down) to drag the object in any horizontal (XY) direction. When moving a scenery asset, its height will be fixed to the terrain height.  Set the Height for a Scenery Asset  When placed in a route by the Placement Tool a scenery asset will take the height of the terrain as its set height. It will be fixed to the terrain so when you move it around it will always be at the same height as the terrain it is over. This can be changed to fix the object to a set height above or below the terrain. With the object selected, enter a height value into the Tool Options  Height  text box Hit the  Enter  key The scenery asset will now be fixed at the entered height above (or below) the terrain as it is moved around  Asset Context Menu  A selected scenery asset, or a group of selected scenery assets, will have a Context Icon with a Context Menu. The icon design will vary between asset types. Multiple objects can be selected by holding down the  Shift  key while Left clicking on each object. To open an assets Context menu either:- Left click the Context Icon, or Press the  T  key  Cut  remove the selected asset or assets and move them into the Scrapbook  Copy  copy the selected asset or assets and place them into the Scrapbook  Paste  paste the contents of the current Scrapbook next to the selected asset  Delete  delete the selected assets. It has the same effect as pressing the  Delete  key  Smooth Ground Under Selected  changes the height of the terrain under the asset to match the set height of the object. If multiple assets at different heights have been selected then the terrain height will be set to match the height of the lowest asset  Settle on Ground  sets the height of the assets to match the height of the terrain beneath them ("drops them back to earth")  Apply Height  sets the height of the assets to the value in the Tool Options  Height  text box  Reset Object Rotation  resets the rotation angle of the assets to their default values  Randomise Object Rotation  applies a random rotation angle to each asset  Select in Assets Palette  identifies the selected asset in the Asset Palette like the Eyedropper Tool. If multiple different assets have been selected then the asset with the Context Icon will be identified  Edit Properties  opens the Properties window of the selected asset  For Spline Objects   Moving Spline Points  To move an individual spline point:- Select the Free Move Tool. Select (Left click on) the spline point to be moved. This will be shown as green meaning active. Inactive spline points are shown as black. Use the mouse (Left button held down) to drag the spline point in any horizontal (XY) direction. The spline point will be fixed at its original height.  Moving Spline Segments  Splines will have at least two spline points and are frequently made of multiple segments joined together. You can easily move a spline by moving its segments, individually or as a group of segments. To move an individual or multiple spline segments:- Select the Free Move Tool. Select (Left click on) the spline segment to be moved - click anywhere between the two spline points at the end of the segment. To select multiple segments, The selected segment or segments will be highlighted in green. The segment that you clicked will have a Temporary Spline Point inserted at the location where you clicked the spline. IF you are going to select and move more than one spline segment, then:- hold the  Shift  key down and individually Left click between the spline points on each additional segment. The last segment that you clicked will have a Temporary Spline Point inserted at the location where you clicked the spline. Use the mouse (Left button held down) to drag the Temporary Spline Point in any horizontal (XY) direction. The Fine Adjustment Tool Keyboard Shortcut:  D  The Fine Adjustment Tool is used to make fine adjustments (XYZ axis, rotation, tilt) to objects in the route. This tool does not need any other palettes. None of the controls in the Tool Options Palette are active. However it will display position data in the Info Palette. If this palette is not visible on the screen then refer to  Notes: Palettes at the top of this document. The Marquee Tool Keyboard Shortcut:  F  The Marquee Tool is used to select areas of the route. This tool does not need any other palettes. Trainz Wiki More Tutorials and Guides to Using Trainz How to Guides Driver Commands List Session Rules List (Alphabetical) with Parameters Session Rules List (Categories) With Parameters This page was created by Trainz user pware in January 2023 and was last updated as shown below.