SAR Scenario Orroroo Grain V1

The has locos available at the  Peterborough Loco Depot 

• SAR T 23 at  Loco Sidings 
• SAR T 233 at  Loco Sheds 
• SAR 407 at  Repair Shop Sheds 

• 6 WHE Gondola covered wagons
• 1 Guard Van

on the Peterborough  Grain & Flour Mill  Siding

1. Move your selected loco onto the Peterborough  Grain & Flour Mill Siding and couple to the WHE wagons stored there.
2. Move the train onto the  Main  Line and then onto the Peterborough-Quorn Line. Proceed to Orroroo.
3. At Orroroo move the train onto the  Goods  road to the  Grain Silos  for loading. Notes:
   • stop the WHE wagons and Guard Van so that they are clear of the  Goods Crane .
   • the WHE wagons are not industry enabled and will not actually load but because they are covered this issue will not be noticeable.
4. Run the loco around the train to attach to the Guard Van at its rear.
5. Detach the Guard Van from the WHE wagons and shunt the van onto the  Goods Loop . Position it alongside the Goods Shed.
6. Turn the loco on the  WYE . Notes:
   • The  WYE  was actually removed in the 1930s so in reality the loco would have to run "tender first" back to Peterborough - which was not popular with the train crews but is an option you can use.
   • If you have selected the Garrett Loco SAR 407 for this scenario then it will be too long to turn on the  WYE .
7. Coal and water (if needed) at the Orroroo  Loco Coal & Water  Stage.
8. Attach the loco to the southern (Peterborough) end of the WHE wagons at the  Grain Silos .
9. Shunt the train onto the  Goods Loop  and couple it to the Guard Van.
10. Proceed to a vacant  Yard  road at Peterborough.
11. Run the loco around the train and attach to the Guard Van at its rear.
12. Shunt the Guard Van onto a vacant road in the  Car Shed .
13. Reattach to the WHE wagons and shunt the train to the Peterborough  Grain & Flour Mill  Siding.
14. Detach the loco and return it to the Main  Loco  Depot.

A summary of the facilities and product loads at all locations along the line is provided in the link

• You do not have the authority to enter the Orroroo-Eurelia section of the line. All shunting movements at Orroroo are restricted to the yard area.
• The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
• Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click for details.
• The Turning WYE at Orroroo was removed during the 1930s.
• Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click for details.
• If driving manually in yards, you are responsible for correctly setting any catch points.