SAR Scenario Peterborough Dieselisation

Revision as of 08:41, 11 January 2024

	24 Peterborough Dieselisation
A scenario in the SAR Peterborough Base Session v2.0

Diesel services on the Peterborough-Quorn Line in the 1970s and 80s.

The Historical Bit

By 1970 the main Port Pirie-Broken Hill Line had been converted to standard gauge (4ft 8½in - 1435mm) which isolated the Peterborough-Quorn Line from the rest of the narrow gauge network.

1970 also saw the removal of steam from Peterborough and all remaining narrow gauge services were operated by SAR 830 class narrow gauge diesels, initially SAR 858, 865, 866 and 867 which were based at Peterborough. By the end of 1970 SAR 865 and 866 were transferred to Gladstone and in 1973 SAR 867 was converted, by bogie exchange, to broad gauge (5ft 3in - 1600mm). This left SAR 858 as the only narrow gauge loco at Peterborough from 1973 to 1988.

The Working Timetable for the 1970s and 80s saw only two narrow gauge return freight services each week. One to Quorn and one to Orroroo.

The Quorn service often terminated at Carrieton due to the lack of goods to transport. The service to Quorn also required a crew change on the return trip at Bruce or Hammond. The relief crew were transported from Peterborough by a rail inspection car (see the scenario Rail Car Inspection Run) with the relieved crew transported back by the same vehicle.

In March 1987 the line from Eurelia to Quorn was closed. This was followed in November 1988 by the closure of the remaining line from Peterborough to Eurelia to regular services. The last scheduled revenue runs on the line were to remove grain from the silos at Orroroo in October 1988 (see the scenario Orroroo Grain Run). Special excrusion trains from the Steamtown Peterborough Railway Preservation Society continued to use the line from Peterborough to Eurelia until 2002. Most of the line has since been removed.

Era:

1970-1988

Duration:

Various depending on options

Loco:

Available at Peterborough Loco Depot:-

SAR 858

SAR 867

Consist:

Stored on Peterborough Yard 3 to be attached to the selected loco:-

QLX Box vans

MTW Flat wagons

1 Guard Van

The consist is in three separate parts:-

the first 4 wagons (from the Gladstone end) for train 197 terminating at Orroroo
the 4 wagons above plus the next 3 wagons for train 3 terminating at Carrieton
the 7 wagons above plus the remaining wagons for train 3 continuing through to Quorn. This includes the guard van at the end

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The Getting Started guide below gives a summary of what is available.

To display this information click any

graphic, or go to the bottom of the page for all the session links (all links will open in this window).

Getting Started:

If you have already closed the opening message window then the first step is to pause the session by pressing the P key.
If you decide to set the session clock to a different starting time then follow the instructions shown in the Orders section
Next locate your loco. Either:-
- Open the Finder Tool (press Ctrl F ) and type, in the Name field, the name of the selected loco - e.g. SAR 858. Click the tick icon, OR
- Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
- the loco name (SAR 858) OR
- the driver icon (named Driver 858) - this is a non-animated icon
then click the drivers Eye icon to take control of the loco
Take a few moments to get your bearings. Click (this link will open in this window) to show the location details and track plans for Peterborough. In each location details page:-
- the tab gives an overall summary of each location with a "potted" history (where available).
- the tab reveals the invisible Track Marks for Drive To commands.
- the tab lists all active industries and their commodities.
- the tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
Each location details page has direct links to the adjacent locations so you can explore along the route.
When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
Switch back to Trainz Driver Mode
Close the opening message window and, if Pause is shown on the screen, press the P key to start the session.

Tutorial:

A tutorial on using these scenarios is provided in the link on the left. The link will open in this window

Orders:

Move the selected loco out of the depot and into the yard
The consist waiting on the Peterborough Yard 3 Road is in three parts:-
- For train 197 select the first 4 wagons only. Shunt these wagons to an empty Yard Road. Attach a Guard Van to the rear of the consist. The Guard Van can be taken from the rear of the remaining wagons or from the nearby Car Shed
- For train 3 terminating at Carrieton, shunt to combine the first two consists into a single consist. Shunt these wagons to an empty Yard Road. Attach a Guard Van to the rear of the consist.
- For train 3 continuing through to Quorn, shunt all three consists into a single consist with the Guard Van at the rear
Proceed onto the Peterborough-Quorn Line
Detach and shunt wagons at each location according to the working timetable shown below. All wagons have been placed in the consist in destination order from the front
Detach:-
- MTW flat wagons to Goods Cranes
- QLX wagons to Goods Sheds
Leave each wagon at its loading/unloading point
For train 197 turn the loco on the WYE at Orroroo
Note: The WYE was actually removed in the 1930s so in reality the loco would have to run "long nose first" back to Peterborough (or "long nose first" up to Orroroo). As SAR 858 was the only narrow gauge loco based at Peterborough from 1973, this problem could not be solved by double-heading with another locomotive, but it is still an option in this scenario
For train 3 you may take the option to terminate at Carrieton

The Base Session has the clock set to start at

This can be changed to any required time. For the details see

SAR Scenario Session Time Change

1970s/80s Peterborough-Quorn Freight Timetable

	Days Train №		Tu 3	Th 197	when required

Peterborough Depot	CEFJØWX	dep	07:30	07:30
Yard			A	A	Attach wagons in Yard 3. Combine consists for train 3 (see notes in Orders above)
		dep	08:00	08:00

Black Rock	X	arr	08:27	08:29D
Orroroo	ΔCFWX	arr	08:39D	08:54D

dep			08:49
Eurelia	FWX	arr	09:15D
Carrieton	CFWX	arr	09:45D		Option to terminate

Moockra	X	arr	10:10D
Hammond	X	arr	10:36D
Bruce	X	arr	11:01D
Quorn	CEFJØWX	arr	11:34D

bold time = arrive/depart time		(plain time) = timing point
Service Symbols:
L Load	U Unload	A Attach wagons	D Detach wagons
S Stable loco	a on request stop	c coal (if required)	w water (if required)
Location Symbols:
Δ = Turning Triangle	C = Loco Coal Loader	E = Engine Depot	F = Fixed Signals
J = Junction	Ø = Loco Turntable	W = Loco Water Tank	X = Crossing Loop

Driving Notes:

A summary of the facilities and product loads at all locations along the line is provided in the link

All trains are restricted to 20mph on the curves between Wallaway and Eurelia.
The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Click for details.
Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click for details.
If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
	Session Scenarios	Location List	Drive Tutorial	Rolling Stock	Loco Roster	Active Industries

This page was created by Trainz user pware in October 2022 and was last updated as shown below.

@@ Line 199: / Line 199: @@
 <td width=140>&#160;</td>
 <td align="right" width=100 colspan=2>'''Days'''<br>'''Train &#8470;'''</td>
-<td rowspan=19 width=1></td>									<!-- Row count -->
+<td rowspan=17 width=1></td>									<!-- Row count -->
-<td rowspan=19 bgcolor="black" width=1></td>					<!-- Row count -->
+<td rowspan=17 bgcolor="black" width=1></td>					<!-- Row count -->
 <td align="center" width=60>'''Tu'''<br>'''3'''</td>
 <td align="center" width=60>'''Th'''<br>'''197'''</td>
-<td rowspan=19 bgcolor="black" width=1></td>					<!-- Row count -->
+<td rowspan=17 bgcolor="black" width=1></td>					<!-- Row count -->
-<td rowspan=19 width=1></td>									<!-- Row count -->
+<td rowspan=17 width=1></td>									<!-- Row count -->
-<td width=440>&#160;</td>
+<td width=440>when required</td>
 </tr>
 <tr>
@@ Line 239: / Line 239: @@
 <td align="right">'''X'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;08:27</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''08:29D'''</td>
-<td>Detach 1 QLX van, 1 MTW wagon</td>
+<td>&#160;</td>
 </tr>
 <tr valign="top">
@@ Line 247: / Line 247: @@
 <td align="right">'''&#916;CFWX'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''08:39D'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''08:54D'''</td>
-<td rowspan=3>Detach 1 QLX van, 1 MTW wagon</td>
+<td>&#160;</td>
 </tr>
 <tr>
@@ Line 257: / Line 257: @@
 <tr valign="top">
 <td colspan=3 align="right">'''dep'''</td>
-<td>&#160;'''hh:mm'''</td>
+<td>&#160;'''08:49'''</td>
-<td>&#160;</td>
-</tr>
-<tr valign="top">
-<td colspan=2>'''Wallaway'''</td>
-<td>&#160;</td>
-<td>(hh:mm)</td>
 <td>&#160;</td>
 <td>&#160;</td>
@@ Line 271: / Line 265: @@
 <td align="right">'''FWX'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''09:15D'''</td>
+<td>&#160;</td>
 <td>&#160;</td>
-<td>Detach 1 MTW wagon</td>
 </tr>
 <tr valign="top">
@@ Line 279: / Line 273: @@
 <td align="right">'''CFWX'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''09:45D'''</td>
 <td>&#160;</td>
-<td>Option to terminate. Detach 1 QLX van (or 2 if terminating)</td>
+<td>Option to terminate</td>
 </tr>
 <tr>
@@ Line 290: / Line 284: @@
 <td align="right">'''X'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''10:10D'''</td>
+<td>&#160;</td>
 <td>&#160;</td>
-<td>Detach 1 QLX van</td>
 </tr>
 <tr valign="top">
@@ Line 298: / Line 292: @@
 <td align="right">'''X'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''10:36D'''</td>
+<td>&#160;</td>
 <td>&#160;</td>
-<td>Detach 1 QLX van</td>
 </tr>
 <tr valign="top">
@@ Line 306: / Line 300: @@
 <td align="right">'''X'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''11:01D'''</td>
 <td>&#160;</td>
-<td>Detach 1 MTW wagon</td>
-</tr>
-<tr valign="top">
-<td colspan=2>'''Kingswood'''</td>
-<td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
 <td>&#160;</td>
-<td>Detach 1 QLX van</td>
 </tr>
 <tr valign="top">
@@ Line 321: / Line 308: @@
 <td align="right">'''CEFJ&#216;WX'''</td>
 <td align="right">'''arr'''</td>
-<td>&#160;'''hh:mmD'''</td>
+<td>&#160;'''11:34D'''</td>
+<td>&#160;</td>
 <td>&#160;</td>
-<td>Detach 2 QLX vans</td>
 </tr>
 </table>				<!-- END Working Timetable contents Table -->

SAR Scenario Peterborough Dieselisation

Revision as of 08:41, 11 January 2024

Views

Personal tools

Navigation

Search

Toolbox