SAR Scenario Peterborough Dieselisation

Revision as of 08:03, 21 October 2022

	24 Peterborough Dieselisation
A scenario in the SAR Peterborough Base Session v2.0

Diesel services on the Peterborough-Quorn Line in the 1970s and 80s.

The Historical Bit

By 1970 the main Port Pirie-Broken Hill Line had been converted to standard gauge (4ft 8½in - 1435mm) which isolated the Peterborough-Quorn Line from the rest of the narrow gauge network.

1970 also saw the removal of steam from Peterborough and all remaining narrow gauge services were operated by SAR 830 class narrow gauge diesels. Initially SAR 858, 865, 866 and 867 were based at Peterborough but SAR 865 and 866 were transferred to Gladstone and in 1973 SAR 867 was converted, by bogie exchange, to broad gauge (5ft 3in - 1600mm). This left SAR 858 as the only narrow gauge loco at Peterborough from 1973 to 1988.

The Working Timetable for the 1970s and 80s saw only two return freight services each week. One to Quorn and one to Orroroo.

The Quorn service often terminated at Carrietone due to lack of goods to transport. It also required a crew change on the return trip at Bruce or Hammond. The relief crew were transported from Peterborough by a rail inspection car (see the scenario Rail Car Inspection Run) with the relieved crew transported back by the same vehicle.

In March 1987 the line from Eurelia to Quorn was closed. This was followed in November 1988 by the closure of line from Peterborough to Eurelia although excrusion trains from the Steamtown Peterborough Railway Preservation Society continued to use the line to Eurelia until 2002.

Era:	1970s, 1980s
Duration:	XXXXXXXX
Loco:	SAR 858 at Loco Sheds SAR 867 at Loco Sheds
Consist:	To be attached to the selected loco QLX Box vans MTW Flat wagons 1 Guard Van

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The Getting Started guide below gives a summary of what is available.

To display this information click any

graphic, or go to the bottom of the page for all the session links (all links will open in this window).

Getting Started:

If you have already closed the opening message window then the first step is to pause the session by pressing the P key.
Next locate your loco. Either:-
- Open the Finder Tool (press Ctrl F ) and type, in the Name field, the name of the selected loco - e.g. SAR 858. Click the tick icon, OR
- Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
- the loco name (SAR 858) OR
- the driver icon (named Driver 858) - this is a non-animated icon
then click the drivers Eye icon to take control of the loco
Take a few moments to get your bearings. Click (this link will open in this window) to show the location details and track plans for Peterborough. In each location details page:-
- the tab gives an overall summary of each location with a "potted" history (where available).
- the tab reveals the invisible Track Marks for Drive To commands.
- the tab lists all active industries and their commodities.
- the tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
Each location details page has direct links to the adjacent locations so you can explore along the route.
When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
Switch back to Driver Mode and either close the opening message window or press the P key to start the session.

Tutorial:

A tutorial on using these scenarios is provided in the link on the left. The link will open in this window

Orders:

Move the selected loco out of the depot and into the yard
The consist waiting on the Peterborough Yard 3 Road is in two parts:-
- For Train №197 select the first 5 wagons only. Shunt these wagons to an empty Yard Road. Attach a Guard Van to the rear of the consist. The Guard Van can be taken from the rear of the remaining wagons or from the nearby Car Shed
- For Train №3 select all the wagons. Combine the two separate consists into a single consist with the Guard Van at the rear
Proceed onto the Peterborough-Quorn Line delivering wagons according to the working timetable shown below
For train №197 turn the loco on the WYE at Orroroo
Note: The WYE was actually removed in the 1930s so in reality the loco would have to run "long nose first" back to Peterborough (or "long nose first" up to Orroroo). As SAR 858 was the only narrow gauge loco based at Peterborough from 1973, this problem could not be solved by double-heading with another locomotive, but it is still an option in this scenario.
For train №3 you may take the option to terminate at Carrieton

Peterborough-Quorn Freight Timetable 1970s and 1980s

	Frequency Train №		Tu 3	Th 197	Tu = Tuesday, Th = Thursday

Peterborough Depot	CEFJOWX	dep	08:00	08:00
	Yard	dep	08:mm	08:mm

Minvalara	UX		..	..	No longer in use after 1970
Black Rock	UX	arr	hh:mm	hh:mm	Deliver 1 QLX van, 1 MTW wagon
Orroroo	ΔCFWX	arr	hh:mm	hh:mm	Deliver 1 QLX van, 1 MTW wagon

dep			hh:mm

Wallaway	U		..
Eurelia	FWX	arr	hh:mm		Deliver 1 MTW wagon
Carrieton	CFWX	arr	hh:mm		Deliver 1 QLX van (or all remaining wagons)
Moockra	UX		hh:mm		Deliver 1 QLX van
Hammond	UX	arr	hh:mm		Deliver 1 QLX van
Bruce	UX	arr	hh:mm		Deliver 1 QLX van
Kingswood	U		..
Quorn	CEFJOWX	arr	hh:mm		Deliver 2 QLX vans

Location Symbols:
Δ = Turning Triangle	C = Loco Coal Loader	E = Engine Depot	F = Fixed Signals	J = Junction
O = Loco Turntable	U = Unattended	W = Loco Water Tank	X = Crossing Loop

Driving Notes:

A summary of the facilities and product loads at all locations along the line is provided in the link

The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Click for details.
Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click for details.
If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
	Session Scenarios	Location List	Drive Tutorial	Rolling Stock	Loco Roster	Active Industries

This page was created by Trainz user pware in October 2022 and was last updated as shown below.

@@ Line 54: / Line 54: @@
 <td><span style="font-size: 15px; font-weight: 700; color: white; background-color: black;">&nbsp;Consist:&nbsp;</span></td>
 <td>To be attached to the selected loco
-*XXXXXXX
+*'''[[SAR_Scenario_Rolling_Stock#QR_QLX|QLX Box]]''' vans
+*'''[[SAR_Scenario_Rolling_Stock#QR_MTW|MTW Flat]]''' wagons
 *1 '''[[SAR_Scenario_Rolling_Stock#Guard_Vans|Guard Van]]'''
 </td>
@@ Line 127: / Line 128: @@
 <td width=716>
 # Move the selected loco out of the depot and into the yard
-# Couple to the consist waiting in the <span style="font-weight: 700;">Peterborough <span style="color: white; background-color: blue;">&nbsp;Yard 3&nbsp;</span> Road</span>
+# The consist waiting on the <span style="font-weight: 700;">Peterborough <span style="background-color: cyan;">&nbsp;Yard 3&nbsp;</span> Road</span> is in two parts:-
-# Procedd onto the <span style="font-weight: 700; color: white; background-color: black;">&nbsp;Peterborough-Quorn Line&nbsp;</span> according to the '''working timetable''' shown below for the selected train '''&#8470;197'''
+#* For Train '''&#8470;197''' select the first 5 wagons only. Shunt these wagons to an empty <span style="font-weight: 700;"><span style="background-color: cyan;">&nbsp;Yard&nbsp;</span> Road</span>. Attach a '''Guard Van''' to the rear of the consist. The '''Guard Van''' can be taken from the rear of the remaining wagons or from the nearby <span style="font-weight: 700; color: white; background-color: black;">&nbsp;Car Shed&nbsp;</span>
+#* For Train '''&#8470;3''' select '''all''' the wagons. Combine the two separate consists into a single consist with the '''Guard Van''' at the rear
+# Proceed onto the <span style="font-weight: 700; color: white; background-color: black;">&nbsp;Peterborough-Quorn Line&nbsp;</span> delivering wagons according to the '''working timetable''' shown below
 # For train '''&#8470;197''' turn the loco on the <span style="font-weight: 700; color: white; background-color: black;">&nbsp;WYE&nbsp;</span> at '''Orroroo'''
 #:'''Note:''' The <span style="font-weight: 700; color: white; background-color: black;">&nbsp;WYE&nbsp;</span> was actually removed in the 1930s so in reality the loco would have to run "long nose first" back to '''Peterborough''' (or "long nose first" up to '''Orroroo'''). As '''SAR 858''' was the only narrow gauge loco based at '''Peterborough''' from 1973, this problem could not be solved by double-heading with another locomotive, but it is still an option in this scenario.
@@ Line 189: / Line 192: @@
 <td align="right">'''UX'''</td>
 <td align="right">'''arr'''</td>
-<td align="center">'''..'''</td>
 <td align="center">'''hh:mm'''</td>
-<td>Deliver 1 QLX van</td>
+<td align="center">'''hh:mm'''</td>
+<td>Deliver 1 QLX van, 1 MTW wagon</td>
 </tr>
 <tr valign="top">
@@ Line 199: / Line 202: @@
 <td align="center">'''hh:mm'''</td>
 <td align="center">'''hh:mm'''</td>
-<td rowspan=3>Train '''&#8470;3''' deliver 1 QLX van<br>Train '''&#8470;197''' deliver the remaining wagons</td>
+<td rowspan=3>Deliver 1 QLX van, 1 MTW wagon</td>
 </tr>
 <tr valign="top">
@@ Line 228: / Line 231: @@
 <td align="center">'''hh:mm'''</td>
 <td>&nbsp;</td>
-<td>Deliver 2 QLX vans</td>
+<td>Deliver 1 MTW wagon</td>
 </tr>
 <tr valign="top">

SAR Scenario Peterborough Dieselisation

Revision as of 08:03, 21 October 2022

Views

Personal tools

Navigation

Search

Toolbox