SAR Scenario Quorn Shunter

From TrainzOnline
(Difference between revisions)
Jump to: navigation, search
m
m
Line 55: Line 55:
 
# The first step is to pause the session by pressing the '''P''' key.
 
# The first step is to pause the session by pressing the '''P''' key.
 
# Next locate your loco. '''Either''':-
 
# Next locate your loco. '''Either''':-
−
## Open the '''Finder Tool''' (press '''CTRL-F''') and type, in the '''name''' field, the name of the loco. For example '''SAR T XXX''' (or just '''T XXX''' should be enough). Click the '''tick''' icon, '''OR'''
+
## Open the '''Finder Tool''' (press '''CTRL-F''') and type, in the '''name''' field, the name of the loco. For example '''SAR T 51''' (or just '''T 51''' should be enough). Click the '''tick''' icon, '''OR'''
 
## Open the '''Driver List''' (bottom left of the screen) and select the loco from there - click the drivers '''Eye''' icon to jump to the loco.
 
## Open the '''Driver List''' (bottom left of the screen) and select the loco from there - click the drivers '''Eye''' icon to jump to the loco.
−
# Take a few moments to get your bearings. Use the [[image:Line_Index_Label.png|link=SAR_Index|Location Index]] (this link will open in this window) and click on '''XXXXXXXXX''' to load its location details and track plans. In each location details page:-
+
# Take a few moments to get your bearings. Use the [[image:Line_Index_Label.png|link=SAR_Index|Location Index]] (this link will open in this window) and click on '''Quorn''' to load its location details and track plans. In each location details page:-
 
#*the [[image:Tab_PH_Grey.png|link=|75px]] tab will identify the '''EIT Paths''' that are available if you wish to use them.
 
#*the [[image:Tab_PH_Grey.png|link=|75px]] tab will identify the '''EIT Paths''' that are available if you wish to use them.
 
#*the [[image:Tab_TM_Grey.png|link=|75px]] tab will reveal the invisible [[image:Trackmark_Right.png|link=|alt=TM|8px]] '''Track Marks''' for '''Drive To''' commands.
 
#*the [[image:Tab_TM_Grey.png|link=|75px]] tab will reveal the invisible [[image:Trackmark_Right.png|link=|alt=TM|8px]] '''Track Marks''' for '''Drive To''' commands.

Revision as of 20:36, 28 February 2021

 Quorn Shunter 
A scenario in the SAR Peterborough Base Session
Shunting operations around Quorn yard. Bottom
Quorn Shunter
 Duration:  40 minutes
 Loco:  SAR T 51 at Quorn Depot

Other Unrostered Locos:

  • SAR T 255 at Quorn Depot

Location Index

Location Index		 Each location in the layout has a detailed set of track diagrams that provide a variety of information. The  Getting Started  guide below gives a summary of the information that is available.

To display the data click any Line Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. The first step is to pause the session by pressing the P key.
  2. Next locate your loco. Either:-
    1. Open the Finder Tool (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 51 (or just T 51 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Use the Location Index (this link will open in this window) and click on Quorn to load its location details and track plans. In each location details page:-
    • the Tab PH Grey.png tab will identify the EIT Paths that are available if you wish to use them.
    • the Tab TM Grey.png tab will reveal the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab will show all active industries and their commodities.
    • the Tab SW Grey.png tab will give you the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location page has direct links to the next locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and press the P key to start the session.

 Yard Map: 		 Shunt Map
Yard map

 Tasks: 

  1. Move the loco from the  Loco  Depot to the  Fuel  Siding.
  2. Collect the 4 empty Tank wagons stored in the siding and move them to eastern (Peterborough) end of the  Station  road.
  3. Collect the 8 Tank wagons and the DB guard van stored on a  Goods Siding 3 .
  4. Attach the 8 wagons and van to the western (Port Augusta) end of the 4 wagons on the  Station  road so that the DB van is at the rear (Port Augusta) end.
  5. You can either:-
    1. Terminate the scenario by moving the wagons to storage on  Goods Siding 1  and the loco back to the  Loco  Depot, OR
    2. Begin the Quorn-Peterborough Empty Fuel Freight scenario starting at Step 5 (you have already completed the first 4 steps).

Driving Notes:
  • You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.
Links: All links will open in this window
Scenarios
Session Scenarios List		 Location Index
Location List		 Rolling Stock
Rolling Stock		 Industries
Active Industries		 Top

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

Retrieved from "https://online.ts2009.com/mediaWiki/index.php?title=SAR_Scenario_Quorn_Shunter&oldid=28581"
Personal tools