"Motor" container

From TrainzOnline
Revision as of 21:40, 8 July 2013 by Fabartus (Talk | contribs)

Jump to: navigation, search

Contents

The Motor container is a top-level config.txt file entry used by Enginespec and Steam Enginespec assets.

Supported Tags

The Motor container supports the following tags. Each tag is show here with its default value.

motor
{
    resistance 1.7
    adhesion 5.0
    maxvoltage 600.0
    maxspeed 33.3
    brakeratio 55000
    max-accel 3500
    max-decel 9000
    throttle-notches 8
    axle-count 6
    surface-area 80.0
    moving-friction-coefficient 0.03
    air-drag-coefficient 0.00017
    full-throttle-speed 33.0*
    driving-wheel-weight-ratio 1.0
}
  • Omit/delete as an illegal value in TRS2006

resistance

Type: Decimal
Desc: Not used

adhesion

Type: Decimal
Desc: Not used

maxvoltage

Type: Decimal
Desc: Voltage to traction motors. This is used to scale the ammeter displayed in the cab. (Power is volts times amps - increasing the voltage means reducing the ammeter...)

maxspeed

Type: Decimal
Desc: Maximum speed in DCC mode.

brakeratio

Type: Decimal
Desc: Coefficient between the pressure in brake cylinder and the brake force.

max-accel

Type: Decimal
Desc: Accelerative force available in DCC mode. Note - this is a force, not a rate of acceleration. The rate of acceleration will depend on the mass of the train as well.

max-decel

Type: Decimal
Desc: Decelerative force available in DCC mode. Note - this is a force, not a rate of deceleration. The rate of deceleration will depend on the mass of the train as well.

throttle-notches

Type: Integer
Desc: Number of throttle notches

axle-count

Type: Integer
Desc: Number of axles on this vehicle. Used in rolling resistance calculations.

surface-area

Type: Decimal
Desc: frontal surface area (sq ft) of vehicle. Used in air resistance calculations.

moving-friction-coefficient

Type: Decimal
Desc: Used in rolling resistance calculations.

air-drag-coefficient

Type: Decimal
Desc: Used in air resistance calculations.

full-throttle-speed

Type: Decimal
Desc:

Notes: TRS2006-SP0 reports this tag as an error in a "container-type 'motor'"

driving-wheel-weight-ratio

Type: Decimal
Desc: Ratio (between 0.0 and 1.0) of the weight of this vehicle bearing down on driven wheels. Used by steam locos only.

Example motor container

TBD

Resistance calculations

These calculations occur according to Davis formula:

R = (1.3ˑm + 29ˑaxle-count) + moving-friction-coefficientˑmˑV + air-drag-coefficientˑsurface-areaˑV^2 + 20ˑmˑG

R = total resistance in lb. including grade resistance
V = speed - mph
m = weight of the vehicle (tons)
G = % grade (upgrade +, downgrade -)

Personal tools