SAR Peterborough Base Session

From TrainzOnline
Revision as of 15:43, 10 February 2021 by Pware (Talk | contribs)

Jump to: navigation, search

A set of scenarios to use with the SAR Peterborough (Northern) Narrow Gauge Division layout. All rolling stock, EIT paths and industry setting are provided in the session. There are no AI controlled trains in this session other than those you add yourself.

Each location in the layout has a detailed set of track diagrams that provide the following information:-
Location Index
Line Index
  • the names of the tracks, sidings and loops
  • the location of various facilities - stations, turntables, water columns, coal stages, engine sheds, active industries
  • the names of active industries and their products and consumables
  • the names and locations of trackmarks for Drive To and Drive Via commands
  • the names, properties and locations of track switches and lists of switch sets for particular movements
  • Enhanced Interlocking Tower paths for those locations that have EITs
Click Line Index Label.png or the graphic above to access the location data.


 Scenarios 
Gladstone-Peterborough Depot Fuel Run 2 hrs   Vintage East-West Express: Terowie-Quorn 3 hrs
Gladstone-Wilmington Local Freight 3 hrs   Gladstone-Jamestown & Terowie Passenger 35 min to 2 hrs
Gladstone Bulk Ore Run 1 hr 25 min to 3 hrs   Paratoo Empty Wagon Return 1 hr 25 min to 3 hrs
Quorn-Peterborough Local Freight 3 hrs 30 min   Quorn-Gladstone Oil Return x hrs xx min
Peterborough-Paratoo Mixed Run x hrs xx min   Paratoo-Gladstone/Terowie Express Freight x hrs xx min to x hrs
Peterborough Shunter 1 hr   Gladstone Shunter x min


 Rolling Stock 
Locomotives Locomotives   Passenger Passenger and Guard   Goods Goods and Bulk


 Active Industries 
Stations   Produce: 
Passengers		  Consume: 
Passengers
  Only the stations at Gladstone, Jamestown, Peterborough, Terowie and Quorn are passenger enabled. By the mid 1960s the other stations were averaging only a few passengers a week, or a month in many cases.
Line740.png
Goods   Produce: 
Wool Bales		  Consume: 
Fertiliser Bagged
General Goods
Line740.png
Crane 
Gantry 		  Produce:  (see note below)
Farm Equipment
I beams
John Deere Tractor Product
Lumber		  Consume:  (all locations)
Farm Equipment
I beams
John Deere Tractor Product
Lumber
  Terowie produces all products, a few locations produce Farm Equipment and John Deere Tractor Product. Some also produce Lumber. Most locations consume all products. Check the Tab IN Grey.png tab at each Line Index Label.png location for details.
Line740.png
Transfer   Produce: 
Fertiliser Bagged
General Goods
Wool Bales		  Consume: 
Fertiliser Bagged
General Goods
Wool Bales
  Only Terowie and Gladstone have goods transfer facilities.
Line740.png
Wool   Produce: 
Wool Bales		  Consume: 
Wool Bales
  Only Gladstone has a dedicated wool transfer dock.
Line740.png
Grain   Produce: 
Wheat		  Consume:  (Gladstone only)
Wheat
Line740.png
Livestock   Produce: 
Cattle
Sheep		  Consume: 
Cattle
Sheep
  Peterborough has separate Cattle and Sheep stockyards.
Line740.png
Fuel   Produce: 
  Consume:  (Quorn only)
Diesel
Petrol
Line740.png
Water Tower Water Tank  Produce: 
Water		  Consume: 
Line740.png
Coal Coal Stage  Produce: 
Coal
Water**		  Consume: 
Coal
  **Produced with coal only at the Peterborough Main Coal & Water Stage
Line740.png
Fuel Point Fuel Oil  Produce: 
Bunker C Oil
Water**		  Consume: 
Bunker C Oil
  **Produced with bunker c oil only at the Peterborough Main Fuel & Water Stage
Peterborough Main Depot and Gladstone Depot only
Line740.png
Top


 Gladstone to Peterborough Depot Fuel Run 

Loco coal stages and fuel-oil points need to be refilled regularly. This service delivers coal to the loco coal stages at Jamestown and Peterborough, and bunker c oil (for the SAR 400 class Garrett locos) to the loco (main) depot at Peterborough.

Fuel Run

Duration: 2 hours
Loco: SAR T 258 on Gladstone Goods Loop
Other Unrostered Locos: none
Consist: Attached to SAR T 258. 5 CCC gondola wagons, 3 Tank wagons, 1 guards van. Each wagon has its destination as part of its name e.g. Bunker Tank Peterborough 3 indicating it is the 3rd tanker wagon for Peterborough.
Tasks:
  1. . Run loco light engined to Goods Loop Yard. Couple to the train.
  2. . Deliver and unload the Jamestown coal wagon at the Jamestown Coal Stage. Store the empty wagon on one of the depot siding roads.
  3. . Deliver and unload one of the Peterborough CCC (coal) wagons at the Peterborough Sub Depot Coal Stage and the remaining CCC wagons at the Peterborough Main Depot Coal Water Stage. Store the empty coal wagons on the depot siding roads.
  4. . Deliver and unload the Tank wagons deliver at the Peterborough Main Depot Fuel Water Stage. Store the empty Tank wagons on the depot siding roads.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure) and at Peterborough (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png for details.
Top


 Vintage East-West Express: Terowie to Quorn Passenger 

Between 1917 and 1932 the Peterborough-Quorn Line was a vital link in the Transcontinental Railway between Sydney on the east coast and Perth on the west coast.

The South Australian Railways provided an express passenger service, the East-West Express, that ran between Terowie and Port Augusta via Quorn. At Terowie it connected with broad gauge services from Adelaide. At Peterborough it connected with narrow gauge services from Broken Hill where there was a standard gauge connection from Sydney. At Quorn it connected with narrow gauge services from the Central Australian Line. At Port Augusta it connected with standard gauge services to Kalgoolie, where there was a narrow gauge connection to Perth.

East West Express

Passengers making the entire trip from Sydney NSW to Perth WA would change trains 5 times - Parkes NSW, Broken Hill NSW, Peterborough SA, Port Augusta SA and Kalgoolie WA. They would change track gauges 3 times (standard to narrow to standard to narrow) and have to navigate through 5 different rail systems (NSWGR, Silverton Tramway, SAR, Commonwealth Railways and WAGR) plus a taxi between two stations in Broken Hill. The entire journey from coast to coast would take 6 days, if all the connections were made.

Today passengers can board a luxury train, the Indian Pacific, in Sydney and travel the entire distance to Perth in 3 days without leaving the train.

Duration: 3 hours
Loco: SAR T 197 at Terowie Station Sidings

Other Unrostered Locos:

  • SAR T 198 at Terowie Depot
  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: Attached to SAR T 197. 3 QR Kuranda BL1 carriages
Task:
  1. . Shunt train into the narrow gauge platform at Terowie.
  2. . Proceed according to the timetable.
Terowie dep 08:05
Peterborough dep 08:30
Black Rock dep 08:58
Orroroo dep 09:14
Eurelia arr 09:38 (water)
  dep 09:42
Carrieton arr 09:57 (coal)
  dep 10:07
Moockra dep 10:21
Hammond dep 10:35
Bruce dep 10:49
Quorn arr 11:15
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Terowie (departure), Peterborough (arrival and departure), Orroroo (arrival and departure), Carrieton (arrival and departure) and at Quorn (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Gladstone to Wilmington Local Freight 

A twice weekly (if required) freight service from Gladstone to Wilmington dropping wagons at locations as required.

Wilmington Local Freight

Duration: 3 hours
Loco: SAR T 257 on Gladstone Yard 2
Other Unrostered Locos: none
Consist: Attached to SAR T 257. 4 MTW wagons, 5 QLX wagons, 4 WHE covered wagons, 1 guards van. Each wagon has its destination as part of its name e.g. QLX Wirrabara 2 indicating it is the 2nd QLX wagon for Wirrabara.
Task:
  1. . Take the train onto the Wilmington Line.
  2. . Deliver wagons according to their destination names. WHE covered wagons are delivered to grain silos. MTW flat wagons are delivered to the yard cranes. QLX wagons are delivered to the goods sheds.
  3. . Water at Booleroo Center.
  4. . Turn the loco on the WYE at Wilmington, coal and water.
Driving Notes:
  • The Gladstone-Wilmington Line is unsignalled with only one train normally allowed on the line at any one time.
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Gladstone to Jamestown School Run 
 Gladstone to Terowie Passenger 

A morning school run from Gladstone to Jamestown Mondays, Wednesdays, Fridays.
Morning passenger and school run from Gladstone to Terowie Tuesdays, Thursdays, Saturdays.

School Run

Duration: Jamestown School Run 35 minutes
Terowie Passenger 1 hour 40 minutes
Loco: SAR T 200 at Gladstone Station Siding

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: Attached to SAR T 200. 2 QR Kuranda BL1 carriages, 1 guards van
Task:
  1. . Reverse the train into Gladstone station.
  2. . On Mondays, Wednesdays, Fridays proceed to the stations at Caltowie and Jamestown. Terminate at Jamestown.
  3. . On Tuesdays, Thursdays, Saturdays proceed to the stations at Yangya (request stop), Caltowie, Jamestown, Belalie North, Yongala, Peterborough and Terowie. Terminate at Terowie.
  4. . Coal (if needed) and water at the destination.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure), Peterborough (arrival and departure) and Terowie (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Paratoo to Peterborough Bulk Ore Train 
 Paratoo to Gladstone Bulk Ore Train 

Express bulk ore freight from Broken Hill to Port Pirie

Loaded Ore

Duration: Paratoo to Peterborough 1 hour 25 minutes (includes refuelling time)
Paratoo to Gladstone 2 hours 45 minutes
Loco: SAR 406 (Garrett) on Paratoo Main

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: Attached to SAR 406. 23 CCC gondola wagons, 1 guards van.
Task:
  1. . Take the train out of Paratoo Yard and proceed to Peterborough Loop or Peterborough Yard 1.
  2. . Detach the loco and proceed to Peterborough Main Depot Fuel Water Stage to refuel the tender with bunker c oil and water.
  3. . Option: Reattach the loco to the train and proceed by 09:30 to Gladstone Yard.
Driving Notes:
  • Fuel oil level is low, but sufficient to reach Peterborough where it can be refilled
  • Water is very low and you will need to refill either here at Paratoo or at Nackara
  • The length of the train restricts its use of passing loops and yard loops to those located at:-
    • Methuen Loop
    • Nackara Station Loop and Nackara Goods
    • Peechara Loop (Note that Nantabibbie Loop is too short)
    • Oodla Wirra Station Loop
    • Ucolta Station Loop
    • Peterborough Loop, Peterborough Station and Peterborough Yard 1
    • Yongala Station Loop and Yongala Goods Loop
    • Belalie North Station Loop
    • Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard
    • Caltowie Station Loop
    • Gladstone (all loops and yards).
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Paratoo (departure), Peterborough (arrival and departure), Jamestown (arrival and departure) and Gladstone (arival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Gladstone to Peterborough Empty Ore 
 Gladstone to Paratoo Empty Ore 

Moving empty ore wagons from Port Pirie to Broken Hill.

Empty Ore

Duration: Gladstone to Peterborough 1 hour 20 minutes
Gladstone to Paratoo 2 hour 45 minutes
Loco: SAR T 201 at Gladstone Depot

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: 22 CCC gondola wagons, 1 guards van on Gladstone Yard 1
Task:
  1. . Run loco light engined from the depot to couple to the train.
  2. . Deliver wagons to Peterborough Loop or Peterborough Yard 1.
  3. . Coal and water the loco at the main depot or sub depot.
  4. . Option: Reattach the loco to the train and continue to Paratoo.
Driving Notes:
  • The length of the train restricts its use of passing loops and yard loops to those located at:-
    • Caltowie Station Loop
    • Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard
    • Belalie North Station Loop
    • Yongala Station Loop and Yongala Goods Loop
    • Peterborough Loop, Peterborough Station and Peterborough Yard 1
    • Ucolta Station Loop
    • Oodla Wirra Station Loop
    • Peechara Loop (Note that Nantabibbie Loop is too short)
    • Nackara Station Loop and Nackara Goods
    • Methuen Loop
    • Paratoo all loops
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure), Peterborough (arrival and departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Quorn to Peterborough Local Freight 

A thrice weekly (if required) freight service from Quorn to Peterborough dropping wagons at locations as required.

Quorn Local

Duration: 3 hours 30 minutes
Loco: SAR T 232 on Quorn Goods Loop
Other Unrostered Locos: none
Consist: Attached to SAR T 232. 3 MTW flat wagons, 9 QLX wagons, 2 WHE covered wagons, 2 CCC gondola wagons, 1 guards van. Each wagon has its destination as part of its name e.g. QLX Orroroo 2 indicating it is the 2nd QLX wagon for Orroroo.
Task:
  1. . Take the train onto the Peterborough-Quorn Line.
  2. . Deliver wagons according to their destination names. WHE covered wagons to grain silos. MTW flat wagons to the yard cranes. QLX wagons to the goods sheds.
  3. . Water and coal the loco as needed.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Quorn (departure), Carrieton (arrival and departure), Orroroo (arrival and departure) and Peterborough (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Quorn to Gladstone Oil Freight 

Through freight from Quorn to Peterborough moving empty fuel cars from Quorn and Port Augusta to Peterborough where they will be attached to a freight for return to Port Pirie.

Oil Run

Duration: x hours
Loco: SAR T 51 at Quorn Depot

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: 8 Tank wagons (from Port Augusta) located at Quorn Goods Sidings, 4 Tank wagons located ar Quorn Fuel Depot, 1 guards van located ar Quorn Goods Sidings.
Task:
  1. . Assemble the train in Quorn Yard.
  2. . Proceed to Peterborough Yard. Coal the loco at Carrieton, water as required at Carrieton or other locations.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Quorn (departure), Carrieton (arrival and departure), Orroroo (arrival and departure), Peterborough (arrival and departure), Jamestown (arrival and departure) and Gladstone (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Peterborough to Paratoo Mixed Passenger/Freight 

Mixed passenger and freight run from Peterborough to Paratoo.

Mixed Passenger

Duration: x hours
Loco: SAR T 202 on Peterborough Car Siding

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: Attached to SAR T 202. 1 QR Kuranda BL1 carriage, 3 QLX wagons, 2 MTW flat wagons, 1 guards van. Each freight wagon has its destination as part of its name e.g. "QLX Nackara" indicating it is destined for Nackara.
Task:
  1. . Reverse the train out of the siding and onto the station line. Pull the train forward into Peterborough Station.
  2. . Depart Peterborough at 08:06 and proceed to Paratoo stopping at Ucolta, Oodla Wirra, Nackara and Paratoo.
  3. . Detach and shunt wagons at each location as required. QLX wagons to the goods shed, MTW flat wagons to the goods cranes.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Peterborough (departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Paratoo to Gladstone and Terowie Mixed Through Freight 

Express freight from Broken Hill to Port Pirie and Terowie. Train is divided at Peterborough.

Through Freight

Duration: Paratoo to Terowie x hours
Paratoo to Gladstone x hours
Loco: SAR T 250 on Paratoo Goods Loop
  • Other Unrostered Locos:
  • SAR T 23 on Peterborough Depot Siding 3
  • SAR T 233 on Peterborough Depot Loco Road 1'
  • SAR 407 at Peterborough (Main) Depot
Consist: Attached to SAR T 250. 3 QLX wagons, 4 MTW flat wagons, 2 CCC gondola wagons, 2 WHE wagons, 3 Tank wagons, 2 guards vans (at either end). Each freight wagon has its destination as part of its name e.g. CCC Gladstone or MTW Terowie.
Task:
  1. . Take the train out of the loop and onto the main line.
  2. . Proceed to Peterborough Yard.
  3. . Coal and water the loco as needed.
  4. . The train has to be divided at Peterborough. Those wagons with Terowie in their names are to be marshalled into one train and combined with wagons stored on Goods Siding 1 that also have Terowie in their names.
  5. . Those wagons with Gladstone in their names are to be marshalled into another train and combined with wagons stored on Goods Siding 1 that also have Gladstone in their names.
  6. . Select a suitable and unrostered loco from the main depot and attach it to the front (eastern or Terowie) end of the Terowie train.
  7. . Reattach SAR T 250 to the front (western or Gladstone) end of the Gladstone train.
  8. . Proceed with both trains (seperately or simultaneously) to Gladstone Goods Transfer Narrow Gauge (all wagons) and Terowie Goods Transfer Narrow Gauge for QLX wagons and Terowie Goods Gantry Narrow Gauge for MTW flat wagons.
Driving Notes:
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Paratoo (departure), Peterborough (arrival and departure), Jamestown (arrival and departure), Gladstone (arrival) and Terowie (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Line Index Label.png' for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Line Index Label.png' for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Line Index Label.png' for details.
Top


 Peterborough Shunter 

Shunting operations that cover the length of Peterborough Yard and Depot.

Shunter

Duration: 1 hour
Loco: SAR T 233 on Peterborough Depot Loco Road 1

Other Unrostered Locos:

  • SAR T 23 on Peterborough Depot Siding 3
Task:
  1. . Move the loco out of the depot and navigate through to the other side of Peterborough Yard onto the Stockyard road.
  2. . Reverse onto Goods Siding 4 and attach to the rake of empty MTW flat wagons stored there.
  3. . Move the empty wagons to the Goods Crane and load.
  4. . Shunt the loaded wagons to Goods Siding 3 and stable.
  5. . Move the loco to Goods Siding 5 and attach to the rake of empty Livestock wagons stored there.
  6. . Shunt the empty wagons to Stockyard Siding 2 DE at the far end of the Stockyard Road for pickup by a later train.
  7. . Move the loco back into the main depot to the Depot Sidings next to the tall water tower. There are empty coal (CCC) and fuel (Tanker) wagons stored on two of the siding roads.
  8. . Shunt the two wagon sets into a single consist and stable on one of the empty Depot Siding roads for later pickup and return to Port Pirie.
  9. . Move the loco to the back of the workshop area at the end of the Depot Repair Road.
  10. . Attach to loco T 229 and move it into the repair shop on Repair Road 2 or Repair Road 3.
  11. . Return the loco to its starting position on Peterborough Depot Loco Road 1.
Driving Notes:
  • You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.
Top


 SAR T Class 4-8-0 

SAR T Class 78 were built between 1910 and 1917 specifically for the Broken Hill-Port Pirie ore trains where they dominated until the mid 1960s. They were regarded as one of the most successful SAR steam locos. 6 were sold to the TGR (Tasmanian Government Railways), a few were transfered to other SAR narrow gauge lines and 5 were temporarily converted to broad gauge (5ft 3in, 1600mm). The vast majority saw out their lives on the SAR Northern (Peterborough) Narrow Gauge Division. The last examples were withdrawn from service in the early 1970s.

Consumes: Coal and Water


 SAR 400 Class 4-8-2+2-8-4 

SAR 406 Class 10 of these oil fired Garratts were purchased in the 1950s specifically for the Broken Hill-Port Pirie ore trains and the Leigh Creek coal trains. Most had been withdrawn by the mid 1960s. The last was withdrawn from service in 1970.

Consumes: Bunker C Oil and Water

Bunker C Oil is available at Gladstone Depot and Peterborough (Main) Depot
Top


 Kuranda BL1 Coach 

Kuranda Coach "Borrowed" from QR (Queensland Rail) as there seems to be no passenger enabled narrow gauge SAR carriages available on the DLS. The QR Kuranda cars are very similar to the SAR Centenary cars which are on the DLS, as broad gauge and standard gauge cars, but are not passenger enabled.

Loads and Unloads: Passengers


 DB Guard Van 

DB Guard Van "Borrowed" from TGR (Tasmanian Government Railways) and can carry a limited number of passengers.

Loads and Unloads: up to 6 Passengers


 MTW Flat Wagon 

MTW Flat Wagon "Borrowed" from QR, designed to carry bulky loads.

Loads and Unloads: Flat stock
  I beams
  Lumber
  Steel pipe
  Tractor farmall
  Tractor Massey-Ferguson


 QLX Van 

QLX Van "Borrowed" from QR, a general purpose goods van.

Loads and Unloads: General Goods
  Fertiliser Bagged
  Wool Bales


 CCC Gondola 

CCC Gondola "Borrowed" from TGR, a bulk mineral wagon.

Loads and Unloads: Coal


 Livestock 8T 4-wheel 

Livestock Van Livestock van.

Loads and Unloads: Cattle
  Sheep


 WHE Covered Wagon 

Covered Wagon "Borrowed" from QR, a covered bulk wagon. This wagon is not industry enabled. I could not find a suitable narrow gauge industry enabled grain hopper on the DLS.

Pretends to Load and Unload: Wheat


 Tank 4-wheel 

Tanker Wagon A bulk fuel wagon.

Loads and Unloads: Bunker C Oil
  Diesel
  Petrol
Top


Retrieved from "https://online.ts2009.com/mediaWiki/index.php?title=SAR_Peterborough_Base_Session&oldid=27827"
Personal tools