SAR Scenario Wilmington Freight V2

From TrainzOnline
Revision as of 10:31, 19 May 2024 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png
  2 
  3   Gladstone to Wilmington Local Freight 

A scenario in the SAR Peterborough Base Session v2.0

This scenario has been updated in V2.0. For the original V1.0 scenario, click here
ArrowRightBtn.png
  4 
A drop off and pickup freight service between Gladstone and Wilmington. Options from the 1964 and 1982 timetables are available. Bottom

 The Historical Bit 

The 1964 Working Timetable for the  Wilmington Line  contained two weekly freight services through to Wilmington with an additional service terminating at Booleroo Centre. Additional services to Wilmington and Booleroo Centre would also run "when required".

The 1982 Working Timetable consisted of a single weekly freight service to Wilmington. By 1984 the freight and livestock facilities at most of the locations along the line had been permanently closed.

The line had no signals beyond Gladstone Yard and train order working was in operation. The line was closed in 1990 and the track has been removed. Most of the track right of way is now a walking and cycling Rail Trail.



Wilmington Local Freight
 Era:  1920s to 1980s
 Duration:  upto 3 hours (one way)
 Loco:  SAR T 257 on Gladstone  Yard 2  or

SAR 830 in Gladstone  Loco Depot 

See Loco Roster Label.png for a full list of locos.
 Consist:  Attached to SAR T 257 or at Gladstone  Goods Transfer Narrow Gauge  Platform (trackmark TM Gladstone Goods Transfer Dual Dn) for SAR 830
The wagons have been placed in the order of their destinations from the front (loco) end. Each wagon has its destination shown in its View Details display. For some destinations the Train № is also shown, for example Stone Hut (221). If no Train № is shown then that destination is for ALL services using that wagon. The Train № is shown in the Working Timetable below.

Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).


Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. If you decide to set the session clock to a different starting time (for example: to match the train timetable shown below) then follow the instructions shown in the Orders section
  3. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of the loco, in this case SAR T 257 or SAR 830 (or just T 257 or 830 should be enough). Click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 257 or SAR 830) OR
    • the driver icon (named Driver 257 or Driver 830) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco
  4. Take a few moments to get your bearings. Click Gladstone Data (this link will open in this window) to show the location details and track plans for Gladstone. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  5. Each location details page has direct links to the adjacent locations so you can explore along the route.
  6. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  7. Switch back to Trainz Driver Mode
  8. Close the opening message window and, if Pause is shown on the screen, press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:
  1. Select a loco (SAR T 257 or SAR 830). For loco SAR 830 move to the Transfer Narrow Gauge Road and attach to the waiting consist
  2. Proceed onto the Wilmington Line stopping as required in the working timetable shown below
  3. Position QLX wagons at the  Goods Sheds , MTW flat wagons at the  Goods Cranes , WHE covered grain wagons at the  Grain Silos  or  Grain Terminal 
  4. Leave each wagon at its unloading point
  5. Train 221 terminates at Booleroo Centre. Turn the loco on the WYE and take water if required
  6. Train 220 continues to Wilmington stopping as required. Turn the loco on the WYE and take coal and water if required
  7. Train 223 and Train 605 run non-stop to Booleroo Centre to drop some wagons then continue non-stop to Wilmington. At Wilmington turn the loco on the WYE
  8. Return to Gladstone stopping to collect the wagons that were detached at each location
Logo
The Base Session has the clock set to start at Clock 0800.png
This can be changed to any required time. For the details see WikiLink.PNGSAR Scenario Session Time Change
 Gladstone-Wilmington Freight Timetable 
  Year
Days
1964
M F
1964
W
1964
(W)
1982
F

(when required)
  Loco
Train №
T Class
220
T Class
221
T Class
223
D830
605
 
Gladstone Depot CEFJØWX dep      15:40  01:25  
Goods Transfer dep      16:00A  01:30A Attach to consist at Goods Transfer platform
Yard dep  07:25  07:25      
Laura ΔUX arr  07:44D  07:44D  16:19     ..  
  dep  07:50  07:50      
Stone Hut X arr  08:03  08:04D     ..     ..  
  dep    08:10      
Wirrabara X arr  08:17D  08:24D     ..     ..  
  dep  08:23  08:30      
Yandiah   arr  8:39  08:46D     ..     ..  
  dep    08:52      
Booleroo Centre ΔWX arr  08:55wD  09:08wD  17:18wD  02:35D  221 turn loco
dep  09:05    17:40  02:55
Peroomba   arr  09:18D       ..     ..  
dep  09:24        
Melrose X arr  09:36D    18:02     ..  
dep  09:42        
Terka   arr  10:01D       ..     ..  
dep  10:07      
Wilmington ΔCEWX arr  10:17cwD    18:30cwDS  03:45D  Detach wagons, turn loco
Train №
Days
620
M F
621
W
624
(W)
668
F
 
(when required)
Wilmington    A      A    A  
dep  14:10    22:50  17:00  
Terka arr  14:21A       ..     ..  
  dep  14:27        
Melrose arr  14:43A    23:161     ..  
  dep  14:49    23:37    
Peroomba arr  15:01A       ..     ..  
  dep  15:07        
Booleroo Centre arr  15:19wA    23:59wA  18:00A  
      (Th)    
dep  15:40  12:45A  00:20  18:10  
Yandiah arr  15:55  13:01A     ..     ..  
  dep    13:07      
Wirrabara arr  16:11A  13:23A  00:51     ..  
  dep  16:17  13:29      
Stone Hut arr  16:31  13:43A     ..     ..  
  dep    13:49      
Laura arr  16:45A  14:03A  01:18     ..  
  dep  16:51  14:10        
Gladstone Yard arr  17:10D  14:30D  01:37D  19:30D Detach wagons
  Depot arr    cwS    cwS    cwS    S Service and stable loco
bold time = arrive/depart time plain time = timing point
Service Symbols:
L Load U Unload A Attach wagons D Detach wagons
S Stable loco a on request stop c coal (if required) w water (if required)
1 Cross train 203      
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals
J = Junction Ø = Loco Turntable W = Loco Water Tank X = Crossing Loop
 Strip Map
Driving Notes:

A summary of the facilities and product loads at all locations along the line is provided in the link Gladstone-Wilmington Line

  • The Wilmington Line is not signalled beyond Gladstone Yard. Train Order working is in operation on the line.
  • You have been issued with orders and authorisations for the Wilmington Line according to your Train №
  • All facing junctions on the Wilmington Line have a speed limit of 15mph.
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
ArrowLeftBtn.png
  2 
Scenarios
Scenario Index
Location Index
Location Index
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock List
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png
  4 


This page was created by Trainz user pware in February 2021 and was last updated as shown below.


Personal tools