SAR Peterborough Base Session

Revision as of 09:30, 16 February 2021

A set of scenarios to use with the SAR Peterborough (Northern) Narrow Gauge Division layout for TRS19. The scenarios replicate, as far as possible, some of the operations that existed in the division from the 1920s until the late 1960s. All rolling stock, EIT paths and industry setting are provided in the session. There are no AI controlled trains other than those you add yourself.

Scenarios
	Run Time (approx)		Run Time (approx)
Gladstone-Peterborough Depot Fuel	2 hrs	Vintage East-West Express: Terowie-Quorn	3 hrs
Gladstone-Wilmington Local Freight	3 hrs	Gladstone-Jamestown and Terowie Passenger	35 min to Jamestown 1 hr 40 mins to Terowie
Gladstone Bulk Ore	1 hr 25 min to Peterborough 2 hrs 45mins to Gladstone	Paratoo Empty Wagon Return	1 hr 25 min to Peterborough 2 hrs 45 mins to Paratoo
Quorn-Peterborough Local Freight	3 hrs 30 min	Quorn-Gladstone Oil Return	x hrs to Peterborough x hrs to Gladstone
Peterborough-Paratoo Mixed	1 hr 40 min	Paratoo-Gladstone/Terowie Express Freight	x hrs xx min Peterborough x hrs xx mins to Terowie x hrs xx mins to Gladstone
Peterborough Shunter	1 hr	Gladstone Shunter	40 min
Terowie Shunter	x hr

Rolling Stock
	Locomotives			Passenger and Guard			Goods and Bulk

Active Industries
	Produce: (see note below) Passengers	Consume: (see note below) Passengers
	Only the stations at Gladstone, Jamestown, Peterborough, Terowie and Quorn are passenger enabled. By the mid 1960s the other stations were averaging only a few passengers a week, or a month in many cases.

	Produce: (see note below) Wool Bales	Consume: (see note below) Fertiliser Bagged General Goods
	Wallaway only consumes Fertiliser Bagged and produces nothing.

	Produce: (see note below) Farm Equipment I beams John Deere Tractor Product Lumber	Consume: (all locations) Farm Equipment I beams John Deere Tractor Product Lumber
	Terowie produces all products, a few locations produce Farm Equipment and John Deere Tractor Product. Some also produce Lumber. Check the tab at each location for details.

	Produce: (Gladstone and Terowie only) Fertiliser Bagged General Goods Wool Bales	Consume: (Gladstone and Terowie only) Fertiliser Bagged General Goods Wool Bales

	Produce: (Gladstone only) Wool Bales	Consume: (Gladstone only) Wool Bales

	Produce: (except Peterborough) Wheat	Consume: (Gladstone and Peterborough only) Wheat

	Produce: Cattle Sheep	Consume: Cattle Sheep
	Peterborough has separate Cattle and Sheep stockyards.

	Produce:	Consume: (Quorn only) Diesel Fuel Petrol Fuel

Water Tank	Produce: Water	Consume:

Coal Stage	Produce: (see note below) Coal Water	Consume: Coal
	Water is produced with coal only at the Peterborough Main Coal & Water Stage

Fuel Oil	Produce: (see notes below) Bunker C Oil Water	Consume: (see notes below) Bunker C Oil
	Water is produced with bunker c oil only at the Peterborough Main Fuel & Water Stage Facility is at Peterborough (Main) Depot and Gladstone Depot only

Gladstone to Peterborough Empty Ore
Gladstone to Paratoo Empty Ore

Moving empty ore wagons from Port Pirie to Broken Hill.

Empty Ore

Duration:	Gladstone to Peterborough 1 hour 20 minutes Gladstone to Paratoo 2 hour 45 minutes
Loco:	SAR T 201 at Gladstone Depot Other Unrostered Locos: SAR T 210 at Gladstone Depot SAR T 23 on Peterborough Depot Siding 1 SAR T 233 on Peterborough Depot Loco Road 1 SAR 407 on Peterborough Depot Repair Shop Road 4
Consist:	22 CCC gondola wagons, 1 DB Guard Van on Gladstone Yard 1
Task:	Run loco light engined from the depot to couple to the train. Deliver wagons to Peterborough Loop or Peterborough Yard 1. Coal and water the loco at the main depot or sub depot. Option: Reattach the loco to the train and continue to Paratoo.
Driving Notes:	The length of the train restricts its use of passing loops and yard loops to those located at:- Caltowie Station Loop Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard Belalie North Station Loop Yongala Station Loop and Yongala Goods Loop Peterborough Loop, Peterborough Station and Peterborough Yard 1 Ucolta Station Loop Oodla Wirra Station Loop Peechara Loop (Note that Nantabibbie Loop is too short) Nackara Station Loop and Nackara Goods Methuen Loop Paratoo all loops The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure), Peterborough (arrival and departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the tab at each location with EITs. Click ' for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Details of all available Trackmarks and Industries are provided in the and tabs at each location. Click ' for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the tab at each location. Click ' for details.

Quorn to Peterborough Local Freight

A thrice weekly (if required) freight service from Quorn to Peterborough dropping wagons at locations as required.

Quorn Local

Duration:	3 hours 30 minutes
Loco:	SAR T 232 on Quorn Goods Loop Other Unrostered Locos: SAR T 255 at Quorn Depot
Consist:	Attached to SAR T 232. 3 MTW flat wagons, 9 QLX wagons, 2 WHE covered wagons, 2 CCC gondola wagons, 1 DB Guard Van. Each wagon has its destination as part of its name e.g. QLX Orroroo 2 indicating it is the 2nd QLX wagon for Orroroo.
Task:	Take the train onto the Peterborough-Quorn Line. Deliver wagons according to their destination names. WHE covered wagons to grain silos. MTW flat wagons to the yard cranes. QLX wagons to the goods sheds. Water and coal the loco as needed. Option: Turn the loco on the WYE and position the DB Guard van at the other end of the passenger car. Return to Peterborough collecting the empty wagons along the way.
Driving Notes:	The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Quorn (departure), Carrieton (arrival and departure), Orroroo (arrival and departure) and Peterborough (arrival). Details of all available EIT Paths are provided in the tab at each location with EITs. Click ' for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Details of all available Trackmarks and Industries are provided in the and tabs at each location. Click ' for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the tab at each location. Click ' for details.

Quorn to Gladstone Oil Freight

Through freight from Quorn to Peterborough moving empty fuel cars from Quorn and Port Augusta to Peterborough where they will be attached to a freight for return to Port Pirie.

Oil Run

Duration:	x hours
Loco:	SAR T 51 at Quorn Depot Other Unrostered Locos: SAR T 255 at Quorn Depot SAR T 23 on Peterborough Depot Siding 1 SAR T 233 on Peterborough Depot Loco Road 1 SAR 407 on Peterborough Depot Repair Shop Road 4
Consist:	8 Tank wagons (from Port Augusta) located at Quorn Goods Sidings, 4 Tank wagons located ar Quorn Fuel Depot, 1 DB Guard Van located ar Quorn Goods Sidings.
Task:	Assemble the train in Quorn Yard. Proceed to Peterborough Yard. Coal the loco at Carrieton, water as required at Carrieton or other locations.
Driving Notes:	The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Quorn (departure), Carrieton (arrival and departure), Orroroo (arrival and departure), Peterborough (arrival and departure), Jamestown (arrival and departure) and Gladstone (arrival). Details of all available EIT Paths are provided in the tab at each location with EITs. Click ' for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Details of all available Trackmarks and Industries are provided in the and tabs at each location. Click ' for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the tab at each location. Click ' for details.

Peterborough to Paratoo Mixed Passenger/Freight

Mixed passenger and freight run from Peterborough to Paratoo.

Mixed Passenger

Duration:	1 hour 40 minutes
Loco:	SAR T 202 on Peterborough Car Siding Other Unrostered Locos: SAR T 23 on Peterborough Depot Siding 1 SAR T 233 on Peterborough Depot Loco Road 1 SAR 407 on Peterborough Depot Repair Shop Road 4
Consist:	Attached to SAR T 202. 1 Kuranda BL1 coach, 3 QLX wagons, 2 MTW flat wagons, 1 DB Guard Van. Each freight wagon has its destination as part of its name e.g. "QLX Nackara" indicating it is destined for Nackara.
Task:	Reverse the train out of the siding and onto the station line. Pull the train forward into Peterborough Station stopping with the passenger car alongside the station building. Depart Peterborough at 08:06 and proceed to Paratoo stopping at Ucolta, Oodla Wirra and Nackara. At each stop place the passenger car alongside the station building. Detach and shunt wagons at each location as required. QLX wagons to the goods sheds, MTW flat wagons to the goods cranes. Leave each wagon at its unloading point. At Paratoo coal and water the loco as required. Option: Return the train to Peterborough collecting the empty wagons along the way.
Driving Notes:	The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Peterborough (departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the tab at each location with EITs. Click ' for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Details of all available Trackmarks and Industries are provided in the and tabs at each location. Click ' for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the tab at each location. Click ' for details.

Paratoo to Gladstone and Terowie Mixed Through Freight

Express freight from Broken Hill to Port Pirie and Terowie. Train is divided at Peterborough.

Through Freight

<

Duration:	Paratoo to Terowie x hours Paratoo to Gladstone x hours
Loco:	SAR T 250 on Paratoo Goods Loop Other Unrostered Locos: SAR T 23 on Peterborough Depot Siding 1 SAR T 233 on Peterborough Depot Loco Road 1 SAR 407 on Peterborough Depot Repair Shop Road 4
Consist:	Attached to SAR T 250. 3 QLX wagons, 4 MTW flat wagons, 2 CCC gondola wagons, 2 WHE wagons, 3 Tank wagons, 2 DB Guard Vans (at either end). Each freight wagon has its destination as part of its name e.g. CCC Gladstone or MTW Terowie.
Task:	Take the train out of the loop and onto the main line. Proceed to a suitable vacant road in Peterborough Yard. Coal and water the loco as needed. The train has to be divided at Peterborough. Those wagons with Terowie in their names are to be marshalled into one train and combined with wagons stored on Goods Siding 1 that also have Terowie in their names. Those wagons with Gladstone in their names are to be marshalled into another train and combined with wagons stored on Goods Siding 1 that also have Gladstone in their names. Select a suitable and unrostered loco from the main depot and attach it to the front (eastern or Terowie) end of the Terowie train. Reattach SAR T 250 to the front (western or Gladstone) end of the Gladstone train. Proceed with both trains (seperately or simultaneously) to Gladstone Goods Transfer Narrow Gauge (all wagons) and Terowie Goods Transfer Narrow Gauge for QLX wagons and Terowie Goods Gantry Narrow Gauge for MTW flat wagons.
Driving Notes:	The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop. Enhanced Interlocking Towers with set paths are available for your optional use at Paratoo (departure), Peterborough (arrival and departure), Jamestown (arrival and departure), Gladstone (arrival) and Terowie (arrival). Details of all available EIT Paths are provided in the tab at each location with EITs. Click ' for details. Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Details of all available Trackmarks and Industries are provided in the and tabs at each location. Click ' for details. Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the tab at each location. Click ' for details.

Peterborough Shunter

Shunting operations that cover the length of Peterborough Yard and Peterborough Depot.

Shunter

Duration:	1 hour
Loco:	SAR T 233 on Peterborough Depot Shed Road 1 Other Unrostered Locos: SAR T 23 on Peterborough Depot Siding 1

Task:	Move the loco out of the depot and navigate through to the other side of Peterborough Yard onto the Stockyard road. Reverse onto Goods Siding 4 and attach to the rake of empty MTW flat wagons stored there. Move the empty wagons to the Goods Crane and load. Shunt the loaded wagons to Goods Siding 3 and stable. Move the loco to Goods Siding 5 and attach to the rake of empty Livestock wagons stored there. Shunt the empty wagons to Stockyard Siding 2 DE at the far end of the Stockyard Road for pickup by a later train. Move the loco back into the main depot to the Depot Sidings next to the tall water tower. There are empty coal (CCC) and fuel (Tanker) wagons stored on two of the siding roads. Shunt the two wagon sets into a single consist and stable on one of the empty Depot Siding roads for later pickup and return to Port Pirie. Move the loco to the back of the workshop area at the end of the Depot Repair Storage Road. Attach to loco SAR T 229 (not in steam) and move it into the repair shop on Depot Repair Shop Road 2 or Depot Repair Shop Road 3. Detatch. Return the loco to its starting position on Peterborough Depot Shed Road 1.
Driving Notes:	You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.

Gladstone Shunter

Shunting operations in Gladstone Yard and nearby sidings.

Shunter

Duration:	40 minutes
Loco:	SAR T 210 at Gladstone Depot Other Unrostered Locos: none
Task:	Move the loco out of the depot and run tender first onto the Wilmington Line to the Gladstone Army Stores Junction about 1/3rd of a mile up the line. Set the mechanical indicator lever and move onto the Army Stores Siding. Attach to the empty wagons at the narrow gauge loading dock platform. Move the wagons into the Wilmington Line resetting the mechanical indicator lever at the junction as you go. Move the loco and wagons to the Goods Shed to load the QLX wagons. After loading uncouple the loco and MTW wagons from the CCC and QLX wagons and move the MTW wagons progressively through the Goods Crane to load. Shunt the MTW wagons back to couple with the CCC and QLX wagons. Detatch the loco. Return the loco to Gladstone Depot and attach to the empty CCC and Tanker wagons stored at the end of the Fuel Depot Road. Move the wagons out of the depot and couple them to the wagons waiting in the Goods Shed. Return the loco to its starting position on Gladstone Depot.
Driving Notes:	You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.

Terowie Shunter

Shunting operations in Terowie Yard.

Shunter

Duration:	xx minutes
Loco:	SAR T 198 at Terowie Depot Other Unrostered Locos: SAR T 231 at Terowie Depot

Task:	Move the loco out of the depot and run tender first past Terowie Station to the Goods Transfer Sidings. Couple the loco to the rake of MTW flat wagons stored on the northern (Peterborough) end of Siding 2. Take the MTW flat wagons to the Goods Gantry Narrow Gauge to be loaded. After loading take the wagons back to the Goods Transfer Sidings and store them on Siding 1. Couple the loco to the rake of QLX wagons on Siding 2. Take the QLX wagons to the Goods Transfer Narrow Gauge shed and load. After loading move the wagons onto Siding 2. The two rakes of loaded wagons on Siding 1 and Siding 2 must be split and recombined into two consists according to their destinations. The destinations, Peterborough and Gladstone, are shown in the name of each wagon. All the Gladstone wagons are to be placed into one consist and the Peterborough wagons into the other consist. Combine the two consists into one consist with the Peterborough wagons at the front (Peterborough) end the DB Guard Van at the rear of the Gladstone wagons. Move the combined consist onto the Loop road in the main Terowie Yard. Return the loco to its starting position on Terowie Depot.
Driving Notes:	You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.

SAR T Class 4-8-0

78 were built between 1910 and 1917 specifically for the Broken Hill-Port Pirie ore trains where they dominated until the mid 1960s. They were regarded as one of the most successful SAR steam locos. 6 were sold to the TGR (Tasmanian Government Railways), a few were transfered to other SAR narrow gauge lines and 5 were temporarily converted to broad gauge (5ft 3in, 1600mm). The vast majority saw out their lives on the SAR Northern (Peterborough) Narrow Gauge Division. The last examples were withdrawn from service in the early 1970s.

Consumes: Coal and Water

SAR 400 Class 4-8-2+2-8-4

	10 of these oil fired Garratts were purchased in the 1950s specifically for the Broken Hill-Port Pirie ore trains and the Leigh Creek coal trains. Most had been withdrawn by the mid 1960s. The last was withdrawn from service in 1970. Consumes: Bunker C Oil and Water Bunker C Oil is available at Gladstone Depot and Peterborough (Main) Depot

Kuranda BL1 Coach

"Borrowed" from QR (Queensland Rail) as there seems to be no passenger enabled narrow gauge SAR coaches available on the DLS. The QR Kuranda BL1 coaches are very similar to the SAR Centenary coaches which are on the DLS, as broad gauge and standard gauge cars only, but are not passenger enabled.

Loads and Unloads: Passengers

DB Guard Van

"Borrowed" from TGR (Tasmanian Government Railways) and can carry a limited number of passengers.

Loads and Unloads: up to 6 Passengers

MTW Flat Wagon

"Borrowed" from QR, designed to carry bulky loads.

Loads and Unloads:	Farm Equipment
	I Beams
	John Deere Tractor Product
	Lumber

QLX Van

"Borrowed" from QR, a general purpose goods van.

Loads and Unloads:	General Goods
	Fertiliser Bagged
	Wool Bales

CCC Gondola

"Borrowed" from TGR, a bulk mineral wagon.

Loads and Unloads:

Coal

Livestock 8T 4-wheel

Livestock van.

Loads and Unloads:	Cattle
	Sheep

WHE Covered Wagon

"Borrowed" from QR, a covered bulk wagon. This wagon is not industry enabled. I could not find a suitable narrow gauge industry enabled grain hopper on the DLS.

Pretends to Load and Unload:

Wheat

Tank 4-wheel

A bulk fuel wagon.

Loads and Unloads:	Bunker C Oil
	Diesel
	Petrol

@@ Line 8: / Line 8: @@
 </tr>
 <tr valign="top">
-<td width=300>'''[[SAR Scenario Depot Fuel Run|Gladstone-Peterborough Depot Fuel]]'''</td>
+<td width=300>&nbsp;</td>
-<td width=175 bgcolor="lightyellow">'''2 hrs'''</td>
+<td width=175 bgcolor="lightyellow">'''Run Time (approx)'''</td>
 <td width=50>&nbsp;</td>
-<td width=300>'''[[SAR Scenario East-West Express|Vintage East-West Express: Terowie-Quorn]]'''</td>
+<td width=300>&nbsp;</td>
-<td width=175 bgcolor="lightyellow">'''3 hrs'''</td>
+<td width=175 bgcolor="lightyellow">'''Run Time (approx)'''</td>
+</tr>
+<tr valign="top">
+<td>'''[[SAR Scenario Depot Fuel Run|Gladstone-Peterborough Depot Fuel]]'''</td>
+<td bgcolor="lightyellow">'''2 hrs'''</td>
+<td>&nbsp;</td>
+<td>'''[[SAR Scenario East-West Express|Vintage East-West Express: Terowie-Quorn]]'''</td>
+<td bgcolor="lightyellow">'''3 hrs'''</td>
 </tr>
 <tr valign="top">
@@ Line 22: / Line 29: @@
 </tr>
 <tr valign="top">
-<td>'''[[#GBO|Gladstone Bulk Ore]]'''</td>
+<td>'''[[SAR Scenario Gladstone Bulk Ore|Gladstone Bulk Ore]]'''</td>
 <td bgcolor="lightyellow">'''1 hr 25 min to Peterborough'''<br>'''2 hrs 45mins to Gladstone'''</td>
 <td>&nbsp;</td>
@@ Line 228: / Line 235: @@
 </tr>
-</table>
-<br>
------
-<span id="GBO"></span><span style="font-size: 19px; font-weight: 700; background-color: black; color: white;">&nbsp;Paratoo to Peterborough Bulk Ore Train&nbsp;</span><br>
-<span style="font-size: 19px; font-weight: 700; background-color: black; color: white;">&nbsp;Paratoo to Gladstone Bulk Ore Train&nbsp;</span><br>
-Express bulk ore freight from '''Broken Hill''' to '''Port Pirie'''
-[[image:SAR 406 Paratoo Loaded Ore.png|link=|alt=Loaded Ore]]
-<table bgcolor="LightYellow">
-<tr valign="top">
-<td width=75><span style="font-size: 15px; font-weight: 700;">Duration:</span></td>
-<td>'''Paratoo''' to '''Peterborough''' 1 hour 25 minutes (includes refuelling time)<br>
-'''Paratoo''' to '''Gladstone''' 2 hours 45 minutes</td>
-</tr>
-<tr valign="top">
-<td><span style="font-size: 15px; font-weight: 700;">Loco:</span></td>
-<td>'''SAR 406''' (Garrett) on the main line approaching '''Paratoo'''<br>
-'''Other Unrostered Locos:'''
-*'''SAR T 23'''  on '''Peterborough Depot Siding 1'''
-*'''SAR T 233''' on '''Peterborough Depot Loco Road 1'''
-*'''SAR 407''' on '''Peterborough Depot Repair Shop Road 4'''</td>
-</tr>
-<tr valign="top">
-<td><span style="font-size: 15px; font-weight: 700;">Consist:</span></td>
-<td>Attached to '''SAR 406'''. 23 '''CCC''' gondola wagons, 1 '''DB''' Guard Van. </td>
-</tr>
-<tr valign="top">
-<td><span style="font-size: 15px; font-weight: 700;">Task:</span></td>
-<td>
-# Take the train into '''Paratoo Yard''' on the '''Main Line'''. Water the loco as needed.
-# Proceed to '''Peterborough Loop''' or '''Peterborough Yard 1'''.
-# Detach the loco and proceed to '''Peterborough Main Depot Fuel Water Stage''' to refuel the tender with bunker c oil and water.
-# '''Option:''' Reattach the loco to the train and proceed by 09:30 to '''Gladstone Yard'''.</td>
-</tr>
-<tr valign="top">
-<td><span style="font-size: 15px; font-weight: 700;">Driving Notes:</span></td>
-<td>
-*Fuel oil level is low, but sufficient to reach '''Peterborough''' where it can be refilled
-*Water is very low and you will need to refill either here at '''Paratoo''' or at '''Nackara'''
-*The length of the train restricts its use of passing loops and yard loops to those located at:-
-**'''Methuen Loop'''
-**'''Nackara Station Loop''' and '''Nackara Goods'''
-**'''Peechara Loop''' (Note that '''Nantabibbie Loop''' is too short)
-**'''Oodla Wirra Station Loop'''
-**'''Ucolta Station Loop'''
-**'''Peterborough Loop''', '''Peterborough Station''' and '''Peterborough Yard 1'''
-**'''Yongala Station Loop''' and '''Yongala Goods Loop'''
-**'''Belalie North Station Loop'''
-**'''Jamestown Station + Yard''', '''Jamestown Loop + Yard''' and '''Jamestown Goods Loop + Yard'''
-**'''Caltowie Station Loop'''
-**'''Gladstone''' (all loops and yards).
-*The approaches to all locations are protected by invisible signals to prevent the '''AI Half Speed Slowdown Problem''' when approaching a signal at stop.
-*'''Enhanced Interlocking Towers''' with set paths are available for your optional use at '''Paratoo''' (departure), '''Peterborough''' (arrival and departure), '''Jamestown''' (arrival and departure)  and '''Gladstone''' (arival). Details of all available '''EIT Paths''' are provided in the&nbsp;[[image:Tab_PH_Grey.png|link=|75px]]&nbsp;tab at each location with '''EITs'''. Click [[image:Line_Index_Label.png|link=SAR_Index]]' for details.
-*Trackmarks and industries have been provided for AI '''Drive To Trackmark''', '''Drive via Trackmark''' and '''Drive to <span style="background-color: yellow;">&nbsp;Industry&nbsp;</span>''' commands. Details of all available '''Trackmarks''' and '''Industries''' are provided in the&nbsp;[[image:Tab_TM_Grey.png|link=|75px]]&nbsp;and&nbsp;[[image:Tab_IN_Grey.png|link=|75px]]&nbsp;tabs at each location. Click [[image:Line_Index_Label.png|link=SAR_Index]]' for details.
-*Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a '''Caution''' warning sign has been placed at the location of the '''Main Approach Dn''' and '''Main Approach Up''' trackmarks. Details on all switches and suggested switch paths are provided in the&nbsp;[[image:Tab_SW_Grey.png|link=|75px]]&nbsp;tab at each location. Click [[image:Line_Index_Label.png|link=SAR_Index]]' for details.
-</td>
-</tr>
-<tr valign="top">
-<td align="right" colspan=2>[[file:BackToTop.png|link=#top|alt=Top|Top]]</td>
-</tr>
 </table>
 <br>

SAR Peterborough Base Session

Revision as of 09:30, 16 February 2021

Views

Personal tools

Navigation

Search

Toolbox