TNI Physics Interface

From TrainzOnline
Revision as of 09:40, 31 July 2023 by Pw3r (Talk | contribs)

Jump to: navigation, search

TNIPhysics is a builtin TNILibrary within Trainz which allows physics plugin assets to control all the internal train physics for any traincar. This includes engine physics, braking systems and shared systems such as track/air resistance. It doesn't currently include systems such as random motion, coupling interactions, collisions or derailments.

Before continuing, it is recommended you first familiarise yourself with the following pages:

NOTE: This page is a work in progress. If you notice anything out of date, please advise N3V Games. The original release of TNI Physics was in TRS19 SP3 in April 2021. However information and systems may change over time.

Contents

Overview

TNIPhysics is initialised at game startup, and will automatically locate and load any installed TNI physics plugin assets at world/map load time. All TNIPhysics plugins must have a QueryProcessingPriority function, which will allow Trainz to determine which of the user's installed plugins is best suited to handle each specific vehicle. TNIPhysics will make all physics update calls through the plugin's LibraryCall interface.

The specific function calls supported by TNIPhysics are detailed in the next section.

TNIPhysics Library Calls

Init

TNIPhysics will call the plugin library DLL with the function name "Init" on initialization. This call can safely be ignored if no initialisation is necessary. This function expects no return object, and takes no parameters.

QueryProcessingPriority

This function is called from Trainz code to query the processing priority of a plugin for a given traincar. The function will be called across every plugin for every vehicle at load/creation time and when switching control modes (DCC vs cab). Whichever plugin returns the highest priority result will process the vehicle's physics. It has a single TNIPhysicsVehicle as the param, and expects a TNIInteger return result. The TNIPhysics_Priority enum defines a list of example return values, but the programmer is not constrained to using these defines.

  • TNIPhysics_PriorityInvalid - Never use this plugin (-127)
  • TNIPhysics_PriorityLowest - Only use this plugin if there's no other option (-20)
  • TNIPhysics_PriorityLow - Prefer not using this plugin, but it might work ok (-10)
  • TNIPhysics_PriorityDefault - This plugin can handle the request adequately (0). The builtin core plugin asset always returns this value.
  • TNIPhysics_PriorityHigh - This plugin is somewhat specialised to handle the request (10)
  • TNIPhysics_PriorityHighest - This plugin was built exactly for this request (20)

RegisterVehicle

This function is called from Trainz code on the plugin which returns the highest valid result from a call to "QueryProcessingPriority". It notifies a physics plugin that it has been selected to manage the vehicle, and should perform any appropriate internal initialisation. This function takes a single TNIPhysicsVehicle param (being the vehicle to register) and expects no return object.

UnregisterVehicle

This function is the counter to RegisterVehicle, and instructs a plugin that it is no longer managing the physics for a particular vehicle. This will occur when the vehicle is deleted, or Trainz hands it over to a more appropriate plugin (based on the result of a call to the "QueryProcessingPriority" function). This function takes a single TNIPhysicsVehicle param (being the vehicle to unregister) and expects no return object.

When called, the plugin should discard any internal data is has for the specified vehicle. If Trainz required anything to be saved, then a call to SaveVehicleState() will have already made.

ProcessPhysicsCommands

The main vehicle update function. This function is called from Trainz code to process a physics command stream for a specific vehicle. The function takes a TNIArray object which contains the TNIPhysicsVehicle (element 0) and a TNIStream (element 1) containing the commands to run (see enum TNIPhysicsPluginCommand for a list of physics commands and their params). Trainz expects a TNIStream return result, containing a list of physics update commands to Trainz from the plugin (see enum TNIPhysicsGameCommand).

Physics Commands

The ProcessPhysicsCommands LibraryCall employs incoming and outgoing command buffers to communicate physics information with Trainz. The command buffer data is sequential - each command ID is written as a 16 bit integer, and will be followed followed by any relevant command parameters (see enum TNIPhysicsPluginCommand for specific command details).

As this is a raw command stream it is critical that the programmer carefully reads the documentation on each specific command, and correctly reads off each parameter value, even if they are not being used by the plugin. Failure to correctly read all command parameters will result in corruption of the stream, and undefinied application behaviour.

The stream has no terminating value, but stream end may be detected using the TNIStreamTell and TNIStreamGetSize functions, or simply by reading commands until failure is detected (e.g. while (TNIStreamReadInt16(commandStream, 0))).

The programmer must employ similar practices when writing the reply command stream. I.e. Each command is written as a 16 bit integer (TNIStreamWriteInt16), and must be followed by the parameters detailed in enum TNIPhysicsGameCommand. Failure to write data in the correct format will result in undefined behaviour within the application.

Incoming Commands (TNIPhysicsPluginCommand)

Enumeration listing the possible physics commands the game may issue to a plugin. Commands and parameters will be written, in sequence, to the TNIStream param passed to the ProcessPhysicsCommands library call.

TNIP_UpdatePhysicsForVehicle

The main physics update function. This is regularly called by Trainz code to update the traincar physics for a particular time period. This function takes two extra params for the front and rear coupled vehicles, but keep in mind these may be using different TNI plugins.

Parameters:

  • float - The time interval to update for.
  • TNIPhysicsVehicle - The front coupled vehicle.
  • TNIPhysicsVehicle - The rear coupled vehicle.


TNIP_AdjustMomentum

Called from Trainz to notify of an adjustment to a vehicles momentum. This is typically used to apply the results of coupler physics interactions. Vehicles for which the plugin does not internally track momentum can safely ignore this call.

Parameters:

  • double - The new vehicle momentum.


TNIP_FinaliseFramePhysics

Called by Trainz to notify that all updates relating to this vehicle for the current frame are complete. This includes all plugin updates and all coupler interactions. Plugins may use this as an appropriate location to synchronise plugin state to that of the game, or apply visible state changes only. At the time this call is made it is "too late" to perform or apply physics calculations for a given frame.

Parameters:

  • float - The time interval that's been updated.
  • double - The final momentum for this frame.


TNIP_NormalisePhysicsData

Called following an external physics state update in order to perform any physics-mode-specific follow up validation/correction. Examples include after physics/control state replication in multiplayer.

This command takes no parameters.


TNIP_SaveVehicleState

Called by Trainz code to request save data for a specific vehicle. If the plugin maintains any internal state for the specified vehicle then this function should save that state, so that players are able to save and reload with seamless physics behaviour. The save state should be returned to the game by adding a TNIP_ReturnSaveState command to the library call result stream (see TNIPhysicsGameCommand for more). If the plugin tracks no state for the vehicle passed, then this call can be safely ignored.

This command takes no parameters.


TNIP_LoadVehicleState

Called by Trainz code to load previously saved vehicle state. Note that this is always called, even if the plugin does not produce any save state when TNIP_SaveVehicleState is called. Also note that the the passed soup param may have been produced by a different plugin.

Parameters:

  • TNISoup - A saved soup generated by a previous TNIP_SaveVehicleState call on this or another plugin. The soup will contain an AssetID param for the plugin that produced it, using the tag name "plugin-kuid".


TNIP_SteamEngine_AddCoalToFire

Called by Trainz code to add coal to a steam engine. For example, when the player uses the manual "Shovel coal" command.

Parameters:

  • double - The volume (not mass) of coal to add.


Outgoing Commands (TNIPhysicsGameCommand)

Enumeration listing the possible physics commands a plugin may issue to the game. A TNIPhysics plugin may write these commands (and their params) to the TNIStream returned by a ProcessPhysicsCommands library call.

TNIP_UpdateVehicleBegin

Specifies which vehicle a sequence of update commands refers to. Use of this command is not necessary, and by default any written commands will update the vehicle which ProcessPhysicsCommands() was called for. If, however, the plugin wishes to run commands for connection data on one of the coupled vehicles (such as brake pipes, etc) then this is used to specify that vehicle.

Parameters:

  • TNIPhysicsVehicle - The vehicle to start updating.


TNIP_UpdateVehicleEnd

Used to mark the end of a vehicle update stream. This will set the update vehicle to null. Following this, a new TNIP_UpdateVehicleBegin command *must* be written before any further update commands.

This command takes no parameters.


TNIP_ReturnSaveState

Used to return the generated save state for a TNIP_SaveVehicleState command (documented above, in TNIPhysicsPluginCommand).

Parameters:

  • TNISoup - A soup containing the saved plugin state. The plugin should write enough state to adequately restore its current internal state for the given vehicle on reload. It is also courtesy to return known/common save data which this plugin itself may not use/require, but which may be useful/expected by other plugins (this aids in seemless plugin switchover during gameplay).


Engine Commands

TNIP_SetResistanceForce

Sets the current resistant force for train movement. This includes all track resistance, slope resistance, and internal engine resistances.

Parameters:

  • double - The current resistance force, in Newtons.


TNIP_SetBrakingForce

Sets the current braking force for the train. This is the force from any/all applied brakes.

Parameters:

  • double - The current braking force, in Newtons.


TNIP_SetEngineForce

Sets the force currently being output by the engine.

Parameters:

  • double - The current engine force, in Newtons.


TNIP_SetAppliedEngineForce

Sets the force currently being applied to the wheels by the engine. In other words, this is the engine force minus any wheelslip.

Parameters:

  • double - The current applied engine force, in Newtons.


TNIP_SetWheelslipForce

Sets the amount of force currently being lost to wheelslip.

Parameters:

  • double - The current wheelslip force, in Newtons.


TNIP_SetCurrentDrawn

Updates the current drawn stat.

Parameters:

  • double - The current being drawn, in Amps.


TNIP_SetPFXEnergyUseAmount

Updates the "energy use" stat, which is used to generate the PFX "load" variable. This currently has no effect on traincar physics, just particle effects (smoke).

Parameters:

  • double - The energy use for the current time interval.


TNIP_SetWheelMomentum

Sets the current forward momentum for a traincar (i.e. this value will be negative if the traincar is not moving forwards).

Parameters:

  • double - The new forward momentum for the updated traincar, in Newton seconds.


TNIP_AddWheelMomentum

Adds momentum to the updated traincar. A negative (or positive, for backward travelling traincars) value may be used to remove momentum.

Parameters:

  • double - The momentum to add onto the traincar, in Newton seconds.


TNIP_SetExtraEngineMass

Sets the amount of 'extra' engine mass a vehicle currently has. This is typically the fuel mass (water and coal) for steam locos.

Parameters:

  • double - The current extra engine mass, in kg.


TNIP_SetEngineParam

Sets the value of a named engine param, as returned by the script GetEngineParam() function on Vehicle. This is used to add support for custom named parameters, attempting to override the natively supported params may not work.

Parameters:

  • TNILabel - The name of the engine parameter to add/update.
  • double - The new value of the parameter.


TNIP_SetEngineThrottle

Sets the current engine throttle. This should gradually move toward the throttle setting, with some amount of latency.

Parameters:

  • double - The new engine throttle amount (0 to 1).


TNIP_SetCompressorActive

Sets whether the brake system compressor is active.

Parameters:

  • int8_t - The new compressor state (0- off, 1-on).


TNIP_SetEqualiserPressure

Sets the pressure of the brake system equaliser.

Parameters:

  • double - The new equaliser pressure, in g/m^3.


TNIP_SetMainReservoirPressure

Sets the pressure of the brake system main reservoir.

Parameters:

  • double - The new main reservoir pressure, in g/m^3.


TNIP_SetAuxReservoirPressure

Sets the pressure of the brake system auxiliary reservoir.

Parameters:

  • double - The new auxiliary reservoir pressure, in g/m^3.


TNIP_SetAutoBrakeCylinderPressure

Sets the pressure of the brake cylinder.

Parameters:

  • double - The new brake cylinder pressure, in g/m^3.


TNIP_SetIndependentBrakeCylinderPressure

Sets the pressure of the independent/loco brake cylinder.

Parameters:

  • double - The new independent/loco brake cylinder pressure, in g/m^3.


TNIP_SetTrainBrakePipePressure

Sets the pressure of the main train brake pipe.

Parameters:

  • double - The new train brake pipe pressure, in g/m^3.


TNIP_SetEpReservoirPipePressure

Sets the pressure of the electro-pneumatic brake pipe.

Parameters:

  • double - The new electro-pneumatic brake pipe pressure, in g/m^3.


TNIP_SetNo3PipePressure

Sets the pressure of the no3 brake pipe.

Parameters:

  • double - The new no3 brake pipe pressure, in g/m^3.


TNIP_SetNo4PipePressure

Sets the pressure of the no4 brake pipe.

Parameters:

  • double - The new no4 brake pipe pressure, in g/m^3.


TNIP_SetBrakePressureFlowRate

Notifies of the brake pressure flow rate.

Parameters:

  • double - The new brake pressure flow rate, in g/m^3.


Steam Engine Commands

TNIP_SetCoalLevel

Sets the coal level in a steam locomotive. This is the current ratio between the minimum (0) and maximum (1) coal levels for the firebox. i.e., a reading of 0 indicates the fire is at minimum coal, not that it's necessarily "empty", and a value over 1 indicates the fire is over-filled with coal.

Parameters:

  • double - The current coal level in the firebox.


TNIP_SetWaterLevel

Sets the water level in a steam locomotive. This is the current ratio between the minimum (0) and maximum (1) water levels for the boiler, as would be shown on the cab gauge(s). i.e., a reading of 0 indicates the boiler is at or below minimum, not that it's necessarily "empty".

Parameters:

  • double - The current water level in the boiler.


TNIP_SetBoilerPressure

Sets the current pressure within the boiler, in pascals.

Parameters:

  • double - The new boiler pressure, in pascals.


TNIP_SetSteamChestPressure

Sets the current pressure within the steam chest, in pascals.

Parameters:

  • double - The new steam chest pressure, in pascals.


TNIP_SetThrashing

Sets the amount the engine is being 'thrashed', as returned to script by a call to Locomotive.GetEngineParam("thrashing");

Parameters:

  • double - The amount the engine is being 'thrashed', 0 to 1 for normal engine operation, >1 for thrashing.


TNIP_ConsumeCoal

Informs Trainz to consume an amount of coal product, for use as steam engine fuel. The caller should first verify that there is sufficient fuel to meet the request, using TNIPhysicsGetVehicleCoalAvailable().

Parameters:

  • int32_t - The amount of product to consume.


TNIP_ConsumeWater

Informs Trainz to consume an amount of water product, for use as steam engine fuel. The caller should first verify that there is sufficient fuel to meet the request, using TNIPhysicsGetVehicleWaterAvailable().

Parameters:

  • int32_t - The amount of product to consume.


Effect Commands

TNIP_SetWheelAngularVelocity

Sets the angular velocity of the wheels on a steam locomotive. This affects the value of the "cyclespeed2" PFX variable.

Parameters:

  • float - The angular velocity of the driving wheels, in m/s.


TNIP_SetWheelAnimationData

Sets the animation data for the wheels of a traincar. Two values are always written here, but which is used will depend on the type of wheel animation which being used by the traincar.

Parameters:

  • float - The current wheel rotation, from 0 to 2PI.
  • float - The wheel velocity, in m/s.


TNIP_SetBrakeReleaseSoundFade

Sets the volume of the brake release sound on this traincar.

Parameters:

  • float - The new brake release sound volume, 0 to 1.


TNIP_SetPFXVariableValue

Sets the value of a named PFX variable. See validation/steam-mode.txt for a list of valid variable names.

Parameters:

  • TNILabel - The name of the variable to update.
  • float - The new value of the variable.


Accessor Commands (TNIPhysics.h)

Basic accessors for TNIPhysicsVehicle member variables, including those on the frame data, engine spec or steam engine spec.

AssetID/Config Accessors

const TNIAssetID* TNIPhysicsGetVehicleAssetID(const TNIPhysicsVehicle* vehicle)
const TNISoup* TNIPhysicsGetVehicleAssetConfig(const TNIPhysicsVehicle* vehicle)
const TNIAssetID* TNIPhysicsGetVehicleEngineAssetID(const TNIPhysicsVehicle* vehicle)
const TNISoup* TNIPhysicsGetVehicleEngineAssetConfig(const TNIPhysicsVehicle* vehicle)
const TNIAssetID* TNIPhysicsGetVehicleTrackAssetID(const TNIPhysicsVehicle* vehicle)
const TNISoup* TNIPhysicsGetVehicleTrackAssetConfig(const TNIPhysicsVehicle* vehicle)


Train Control Settings

int8_t TNIPhysicsGetVehiclePhysicsModelSetting(const TNIPhysicsVehicle* vehicle)
int8_t TNIPhysicsGetVehicleTractionSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleThrottleSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleSteamRegulatorSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleSteamCutoffSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleTrainBrakeSetting(const TNIPhysicsVehicle* vehicle)
int8_t TNIPhysicsGetVehicleDynamicBrakeSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleLocoBrakeSetting(const TNIPhysicsVehicle* vehicle)
int8_t TNIPhysicsGetVehicleEpBrakeSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleBailTimeSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleHandBrakeSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleSandingSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleCoalRateSetting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleInjector1Setting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleInjector2Setting(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleBlowerSetting(const TNIPhysicsVehicle* vehicle)


Vehicle State Accessors

double TNIPhysicsGetVehicleMass(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleVelocity(const TNIPhysicsVehicle* vehicle)
bool TNIPhysicsGetVehicleIsStopped(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleWheelMomentum(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleWheelslip(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleWheelslipTractionMultiplier(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleWheelslipMomentumMultiplier(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleEngineForce(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleEngineThrottle(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleThrottleGraphOutput(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleDynamicBrakeGraphOutput(const TNIPhysicsVehicle* vehicle)


bool TNIPhysicsGetVehicleIsDerailed(const TNIPhysicsVehicle* vehicle)
bool TNIPhysicsGetVehicleAllowsUserControl(const TNIPhysicsVehicle* vehicle)
bool TNIPhysicsGetVehicleIsAutomaticFireman(const TNIPhysicsVehicle* vehicle)
uint32_t TNIPhysicsGetVehicleCoalAvailable(const TNIPhysicsVehicle* vehicle)
uint32_t TNIPhysicsGetVehicleWaterAvailable(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleSandingTractionMultiplier(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleScriptTractionMultiplier(const TNIPhysicsVehicle* vehicle)


Vehicle Brake Pressure State Accessors

double TNIPhysicsGetVehicleEqualiserPressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleMainReservoirPressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleNo3PipePressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleTrainBrakePipePressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleEpReservoirPipePressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleNo4PipePressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleAuxReservoirPressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleAutoBrakeCylinderPressure(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleIndependentBrakeCylinderPressure(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleScriptBrakePressure(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleBrakePipeEfficiency(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleCompressorEfficiency(const TNIPhysicsVehicle* vehicle)
int8_t TNIPhysicsGetVehicleCompressorActive(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleBrakeReleaseSoundFade(const TNIPhysicsVehicle* vehicle)


Vehicle Track State Accessors

double TNIPhysicsGetVehicleTrackGradient(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleTrackCurveAngle(const TNIPhysicsVehicle* vehicle)


Vehicle Spec Accessors

int8_t TNIPhysicsGetVehicleEngineType(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleMaximumTractiveEffort(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleWheelDiameter(const TNIPhysicsVehicle* vehicle)


Engine Spec Accessors

float TNIPhysicsGetVehicleMaxSpeed(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleMaxDCCAcceleration(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleMaxDCCDeceleration(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleMaxVoltage(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetEngineBrakeRatio(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleThrottleAdjustmentRate(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleAxleCount(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleSurfaceArea(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleMovingFrictionCoefficient(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleAirDragCoefficient(const TNIPhysicsVehicle* vehicle)
double TNIPhysicsGetVehicleDrivingWheelWeightRatio(const TNIPhysicsVehicle* vehicle)


Engine Spec Flowsize Accessors

float TNIPhysicsGetVehicleFlowsize_TrainBrakePipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EpReservoirPipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_No3Pipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_No4Pipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_AuxReservoirVent(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_AuxReservoirToNo3Pipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_AuxReservoirToTrainBrakePipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_AutoBrakeCylinderVent(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_AuxReservoirToAutoBrakeCylinder(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EqualiserMainReservoir(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EqualiserVentHandleOff(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EqualiserVentEmergency(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EqualiserVent(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_No3PipeVent(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_No3PipeMainReservoir(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_Compressor(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_TrainBrakePipeReservoir(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_TrainBrakePipeVent(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_No3PipeToAutoBrakeCylinder(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_EpReservoirPipeToAutoBrakeCylinder(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleFlowsize_MainReservoirEP(const TNIPhysicsVehicle* vehicle)


Engine Spec Volume Accessors

float TNIPhysicsGetVehicleVolume_Equaliser(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_MainReservoir(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_No3Pipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_TrainBrakePipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_EpReservoirPipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_No4Pipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_AuxReservoir(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_AutoBrakeCylinder(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehicleVolume_IndependentBrakeCylinder(const TNIPhysicsVehicle* vehicle)


Engine Spec Pressure Accessors

float TNIPhysicsGetVehiclePressure_BrakePipe(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehiclePressure_BrakeInitial(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehiclePressure_BrakeFull(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehiclePressure_IndBrakeFull(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetVehiclePressure_Compressor(const TNIPhysicsVehicle* vehicle)


Steam Engine Spec Accessors

float TNIPhysicsGetSteamEnginePistonVolumeMin(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEnginePistonVolumeMax(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEnginePistonArea(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEnginePistonLength(const TNIPhysicsVehicle* vehicle)
int TNIPhysicsGetSteamEnginePistonAngularOffsetsCount(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEnginePistonAngularOffset(const TNIPhysicsVehicle* vehicle, int i)


float TNIPhysicsGetSteamEngineTractiveEffortConstant(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineHandBrakeMaxForce(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineTestSpeed(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineTestCutoff(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBurnRate(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBurnRateIdle(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineMinFireTemperature(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineMaxFireTemperature(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFireboxEfficiency(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFireboxHeatingSurfaceArea(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFireboxPlateThickness(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFireboxThermalConductivity(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBlowerEffect(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBlowerMaxFlow(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineStartingCoal(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineIdealCoalMass(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineMaxFireCoalMass(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFuelEnergy(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineFuelSpecificHeatCapacity(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineBoilerVolume(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerVolumeMin(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerVolumeMax(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerFusiblePlugVolume(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSteamChestVolume(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSteamChestMaxFlow(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineValveLapPercent(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineBoilerEfficency(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerEfficencyIdle(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerEfficencyMin(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineBoilerHeatLoss(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineInitialBoilerTemperature(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSuperheatingConstant(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineStartingWater(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineStartingBoilerSteam(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineSafetyValveLowPressure(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSafetyValveLowFlow(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSafetyValveHighPressure(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineSafetyValveHighFlow(const TNIPhysicsVehicle* vehicle)


float TNIPhysicsGetSteamEngineCoalShovelMass(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineWaterInjectorRate(const TNIPhysicsVehicle* vehicle)
float TNIPhysicsGetSteamEngineWaterInjectorRate2(const TNIPhysicsVehicle* vehicle)
Personal tools