SAR Scenario Quorn-Orroroo Freight

From TrainzOnline
Revision as of 07:05, 21 November 2022 by Pware (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
ArrowLeftBtn.png   7   Quorn to Orroroo Local Freight  ArrowRightBtn.png
A scenario in the SAR Peterborough Base Session v2.0
This scenario has been updated in Base Session v2.0. For the original v1.0 scenario, click here
A twice weekly (if required) freight service from Quorn to Orroroo dropping wagons at locations as required. Bottom
Quorn Local
 Era:  1920s to 1960s
 Duration:  h hours mm minutes
 Loco:  SAR T 232 on Quorn  Goods Loop 
 Consist:  Attached to SAR T 232

Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).


Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. If you decide to set the session clock to a different starting time (for example: to match the train timetable shown below) then follow the instructions shown in the Orders section
  3. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of the loco, in this case SAR T 232 (or just T 232 should be enough). Click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 232) OR
    • the driver icon (named Driver 232) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco
  4. Take a few moments to get your bearings. Click Quorn Data (this link will open in this window) to show the location details and track plans for Quorn. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  5. Each location details page has direct links to the adjacent locations so you can explore along the route.
  6. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  7. Switch back to Trainz Driver Mode
  8. Close the opening message window and, if Pause is shown on the screen, press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Orders:
  1. Proceed onto the Peterborough-Quorn Line to locations as specified in the working timetable shown below. Dropping wagons as required.
    • MTW flat wagons to  Goods Cranes 
    • QLX wagons to  Goods Sheds 
    • CCC gondola wagons loaded with coal at  Depot Coaling Stages . In each case stable the emptied wagon at the end of the loading spur
  2. Water and coal the loco at available locations as needed
  3. At Orroroo turn the loco on the WYE
Logo
The Base Session has the clock set to start at Clock 0800.png
This can be changed to any required time. For the details see WikiLink.PNGSAR Scenario Session Time Change
 Quorn-Orroroo Freight Timetable 
  Frequency
Train №		 (M)
420		 (Th)
421		 (when required)
Quorn Yard CEFJOWX dep hh:mm hh:mm  
Kingswood U arr hh:mm .. Detach designated wagons
Bruce UX arr hh:mm .. Detach designated wagons
Hammond UWX arr hh:mmw hh:mmw Detach designated wagons
Moockra UX arr .. hh:mm Detach designated wagons
Carrieton CFWX arr hh:mmcw hh:mmcw Detach designated wagons
  dep hh:mm hh:mm  
Eurelia FWX arr hh:mmw hh:mmw Detach designated wagons
  dep hh:mm hh:mm  
Halls Well U   .. ..  
Wallaway U arr .. hh:mm Detach designated wagons
Orroroo ΔCFWX arr hh:mmcw hh:mmcw Detach designated wagons
bold time = arrive/depart time plain time = timing point
Service Symbols:
a on request stop   c coal (if required) w water (if required)
1 Cross 2 Cross
Location Symbols:
Δ = Turning Triangle C = Loco Coal Loader E = Engine Depot F = Fixed Signals J = Junction
O = Loco Turntable U = Unattended W = Loco Water Tank X = Crossing Loop
Strip Map
Route Key
Driving Notes:

A summary of the facilities and product loads at all locations along the line is provided in the link Port Peterborough-Quorn Line

  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
  • If driving manually in yards, you are responsible for correctly setting any catch points.
Links: All links will open in this window
ArrowLeftBtn.png Scenarios
Session Scenarios		 Location Index
Location List		 Tutorial
Drive Tutorial		 Rolling Stock
Rolling Stock		 Loco Roster
Loco Roster		 Industries
Active Industries		 Top ArrowRightBtn.png

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

Retrieved from "https://online.ts2009.com/mediaWiki/index.php?title=SAR_Scenario_Quorn-Orroroo_Freight&oldid=34686"
Personal tools