Frecciarossa

From TrainzOnline
Revision as of 23:48, 13 December 2018 by Matthiasgose (Talk | contribs)

Jump to: navigation, search

Pro Trainz® ETR 1000 "Frecciarossa" - by 3DZUG

Freccio title.jpg

Table of Content

1. Introduction

- Consist Overview
- Passenger Interiors
- Prepare the train for service (Advanced Mode: Use train ready for service)
- Prepare the train for service (Advanced Mode: Manual GER/IT) - TODO: Brake test, Battery, Main Switch, Cabin Key, Spring-operated brake, Pantograph
- DCC Mode
- Coupling trains
- Shutting down
- Custom Controls

1. Introduction

Frecciarossa is the first PBR highspeed train made by 3DZUG and will change the way you look at Trainz Railroad Simulator forever. This train features eight ultra realistic traincars and five different interiors. The train is fully accessible, which means that you can explore anything - any traincar, any seat. This manual will takes you deep into the rabbit hole to take advantage of all the things we've done for you.

If you just want to drive it, feel free. Here's how it works. The train reacts in basic mode like any other train too. When you enter the cab the startup procedure is shown if the train is not powered ob or driving.

Startup freccio.jpg

For DCC Mode just click yes to enable the displays and LED lights and keep the door control to Trainz. Once done the train gives you feedback what it does for you. Have fun driving it :-)
If you are looking for the advanced mode features scroll down to the Cabin section.

(!)->If you close the browser without the steps written above the displays will remain black.

The Consist



The Cabin

- Overview
- Operating the train
- Display Gauges
- Submenu Door Control

MFD Door Control

If you selected manual door control on startup you are in charge of controlling the doors. Using the manual door control Trainz will not open the doors when you are entering a compatible industry. You decide whenever the doors have to be opened or closed. To remain compatibility the industry process is not blocked and running in background.

To access the door control click the "Door Control" button inside the left MFD (MultiFunctionalDisplay).
Frecciarossa Door 1.jpg

This is the door setup when running a single train unit. You can decide weather you want to open the left or right doors or if you just want to close them. When closing the train checks itself which doors have to be accessed.


Frecciarossa Door 2.jpg

If you are running a double train unit you can change the doors per train.

(!)->Please note that the system requires a Frecciarossa train unit with 8 vehciles per train!

(!)->Decoupling a second train will cause it to close the doors to be prepared for AI drive!

Frecciarossa Door disabled.jpg

(!)->The controls can't be accessed while the train is driving.
(!)->Always make sure that the platform is long enough to handle train or passengers may get hurt when they try to leave the train outside a platform!!!
(!)->The doors will automatically become closed when you try to drive with doors open to avoid passengers getting hurt!

Frecciarossa Door open.jpg

Red symbols indicate that the doors are open. If its flashing the closing process is active. Once all doors are closed they will stay green.

- Submenu System/Language
- Using Cruise Control
- Driving at night
- Security Systems
- Security System: Dead Man's Control (SIFA)

- Customize Passenger Information System



Back to TrainzOnline:Content_Creation_Projects

Personal tools