SAR Scenario Wilmington Freight

From TrainzOnline
Revision as of 15:42, 4 June 2022 by Pware (Talk | contribs)

Jump to: navigation, search
ArrowLeftBtn.png   3   Gladstone to Wilmington Local Freight  ArrowRightBtn.png
A scenario in the SAR Peterborough Base Session
A twice weekly (if required) freight service from Gladstone to Wilmington dropping wagons at locations as required. Bottom

 The Historical Bit 

By the 1960s the  Wilmington Line  was in decline. Scheduled freight services were often cancelled due to insufficient loads and passenger services sometimes consisted of a passenger car attached to a freight service.

When the  Port Pirie-Broken Hill Line  was converted to standard gauge in 1969-70 the Wilmington Line became isolated from the rest of the narrow gauge network. This resulted in the cancellation of all passenger services on the line.

The line had no signals beyond Gladstone Yard and only Booleroo Centre was manned by railway staff. Train order working was in operation on the line.

The 1980s working timetable for the Wilmington Line consisted of a single return freight service each week. The line was closed in 1990 and the track has since been removed. A section of the line has been converted to a "rail trail".


Wilmington Local Freight
 Era:  1920s to 1980s
 Duration:  3 hours
 Loco:  SAR T 257 on Gladstone  Yard 2 

Other Unrostered Locos: Loco Roster Label.png

 Consist:  Attached to SAR T 257. 4 MTW Flat wagons, 5 QLX Box vans, 4 WHE Gondola covered wagons, 1 Guard Van. The wagons have been placed in the order of their destinations with Laura at the front and Wilmington at the rear. Each wagon has its destination as part of its name e.g. QLX Wirrabara indicating its destination is Wirrabara.

Location Index

Location Index
Each location in the layout has a detailed set of track diagrams that provide a variety of information. The  Getting Started  guide below gives a summary of the information that is available.

To display the data click any Line Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. Next locate your loco. Either:-
    1. Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of the loco. For example SAR T 257 (or just T 257 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Click Gladstone Data (this link will open in this window) to show the location details and track plans for Gladstone. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location details page has direct links to the adjacent locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and either close the opening message window or press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


 Tasks: 
  1. Take the train onto the Wilmington Line.
  2. All wagons have been placed in the consist in destination order from the front. Position WHE covered wagons at the  Grain Silos , QLX wagons at the  Goods Sheds , MTW flat wagons at the  Goods Cranes . Leave each wagon at its unloading point.
  3. Water at the Booleroo Centre  Water  Column.
  4. Turn the loco on the  WYE  at Wilmington.
  5. Coal and water the loco at the Wilmington  Loco Coal & Water  Stage.
Logo


Driving Notes:
  • The Wilmington Line is not signalled beyond Gladstone Yard. Train Order working is in operation on the line.
  • You have been issued with orders and the authorisation for the entire Wilmington Line.
  • All facing junctions on the Wilmington Line have a speed limit of 15mph.
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Click Location Index for details.
  • Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click Location Index for details.
Strip Map
Route Key

Links: All links will open in this window
ArrowLeftBtn.png Scenarios
Session Scenarios
Location Index
Location List
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png


This page was created by Trainz user pware in February 2021 and was last updated as shown below.


Personal tools