Help:Surveyor Track Tools

From TrainzOnline
(Difference between revisions)
Jump to: navigation, search
(File:TRS19 Track Condition apply.jpg Track Condition Apply)
(Track mode)
Line 14: Line 14:
 
=Track mode=
 
=Track mode=
 
[[File:Tracks1.jpg]]
 
[[File:Tracks1.jpg]]
{{clear}}
+
 
 
=== [[File:Track list.jpg|90px]] Track selection ===
 
=== [[File:Track list.jpg|90px]] Track selection ===
 
To choose a track use the arrows pointing up and down to the right of the list to navigate it. Click LMB on a name and it will show the model on the screen below. Alternatively write the name of the particular track on the textbox over the list.
 
To choose a track use the arrows pointing up and down to the right of the list to navigate it. Click LMB on a name and it will show the model on the screen below. Alternatively write the name of the particular track on the textbox over the list.

Revision as of 13:40, 19 July 2018

Tracks (F4) allows you to place tracks on the baseboard. Select a suitable track type from the Track Tab Window, then move over to the baseboard and place (LMB).

Track sections in TS12 are made up of flexible length track pieces created by placing 2 spline points. It is called “flexi-track” and it makes laying any lengths of track extremely simple. Select the Track Menu (F4) and the default selection will be Track Mode (T).


Contents

Track mode

Tracks1.jpg

Track list.jpg Track selection

To choose a track use the arrows pointing up and down to the right of the list to navigate it. Click LMB on a name and it will show the model on the screen below. Alternatively write the name of the particular track on the textbox over the list.

TRS19 Object add.jpg Add Track

Click on the Add Track (A) tool and then Click on the left or right arrows of the track selection dialogue to select the type of track you wish to lay, then Click LMB on the baseboard where you want to anchor your starting point. Click LMB again a short distance away to place another spline point. To extend the track further, Click LMB again on the last spline point (the white circle), then Click LMB once more nearby to extend the track. Unless all three spline points are exactly in a straight line, the track will be curved. To connect two sections of track, drag the end spline point of one on top of the end spline point of another and they will automatically connect.

TRS19 Object move.jpg Move Track

To bend the track in any direction, select the Move Track (M) tool and then Click LMB and hold on one of the white spline point circles and drag it so it'll bend. The shape of the curve is affected by how close the spline point you are pulling is to the next spline points.

TRS19 Split spline.jpg Split Spline

Click on the Split Spline tool (Q) and click on a middle spline point (white circle) in the track. The track breaks in two at that point.

TRS19 object get.jpg Get Track

Click on Get Track (G) and then Click LMB on a track. Its image will appear on the Selection Window. Press “A” to change the mode to Add Track and you will be able to lay the same one.

Right clicking the Get Track button will toggle to or from the Get to Pick List function.

The Get to Picklist tool allows you to 'get' any object on a route, and then add it to a Pick List automatically.

TRS19 object delete.jpg Delete Track

Click on Delete Track (D) then click on the bridge section to delete it. If there are any objects on the track, they will also be deleted.

TRS19 Straighten spline.jpg Straighten Track

Click on Straighten Track (B) and then Click LMB on a bent section of laid track. The section of track will straight between the two spline points, the next track segment will also affected (Double track cannot be straightened. Click again on the straightened track and it will return to a curved track.

TRS19 Edit properties.jpg Edit properties

This can be used to name the track section, set its layer, and modify the Track Condition.

Advanced

Click LMB on the Advanced button(Shift F4) to drop down the Advanced Track Menu.

TRS19 Spline height.jpg Spline Height

Click LMB the Adjust Spline Height (H) and Click LMB and hold on a track spline point. Drag your mouse forward and back to raise and lower the spline point.

TRS19 Spline point delete.jpg Delete Spline Point

Click LMB on the Delete Spline Point (X) and Click LMB on a track spline point . When a spline is removed the curvature of a track can be affected.

TRS19 Spline point insert.jpg Insert Spline Point

Click on Insert Spline Point (I) to add a new spline point.

TRS19 Spline smooth.jpg Smooth Spline

Smooth Spline (S) levels the track between two spline points, bringing the land up or down to match the leveled track.

TRS19 Gradient get.jpg Get Gradient

Click Get Gradient (J) and Click LMB on a raised track section between two track spline points. The gradient between those points is shown in the Gradient Value box as a percentage slope.

TRS19 Gradient apply.jpg Apply Gradient

Enter a new gradient value in the Gradient Value text box, then click on Apply Gradient (K).

TRS19 Track Condition get.jpg Get Track Condition

Click the Get Track Condition button, then Click LMB on a section of track to get the current Track Condition.

TRS19 Track Condition value.jpg Track Condition Value

Shows the Track Condition obtained from the Get Track Condition button. You can manually enter a Track Condition value (between 0 and 1), and then use the Apply Track Condition tool to apply the Track Condition to the track splines.

TRS19 Track Condition apply.jpg Track Condition Apply

Applies the track condition shown in the Track Condition Value box.

See Track Condition for further information.

TRS19 Gradient remove.jpg Remove Gradient

Click LMB on remove Gradient and then Click on a track section to remove the gradient between two track points.

TRS19 vertex height get.jpg Get Vertex Height

Click LMB on the Get Vertex Height and Click LMB on the highest spline point on your track. The height is displayed in the Height Value box.

TRS19 vertex height apply.jpg Apply Vertex Height

Click on Apply Vertex Height then Click LMB on another spline point. The spline point is raised to the same height as you first vertex.

TRS19 curve radius get.jpg Show Curve Radius

Click on Show Curve Radius then move your mouse along a track segment. The curve radius is shown next to your mouse cursor. The number is the radius measured in meters so a low number means a tight curve and a high number means a straighter track.

TRS19 Track Vertex Properties.jpg Track Vertex Properties

The Track Vertex Properties allows you to access the properties for each track vertex (spline point). To use this tool, select the Track Vertex Properties tool, then click on a Track Vertex (Spline Point).

Currently, the Track Vertex Properties are used to configure the Superelevation of track on curves.

Trackside Mode

Tracks2.jpg

The second mode in the Track Menu is Trackside Mode. Click LMB on Trackside Mode (Y) to change the Track Tab menu to the Trackside Mode menu.

TRS19 Object add.jpg Add Object

To add a trackside object Click LMB on the Add Object (A) button. The select the object you wish to place from the list. Click LMB at one or the other side at some point of the track. Your object will be placed beside the track and will be “attached” to it. So if you move the track it will move with it.

TRS19 Object move.jpg Move Object

Click LMB on Move Object (M). Then Click LMB+H on a Trackside Object on your track. Drag your mouse along the track to move the object to a different position.

TRS19 TSide Rotate.jpg Rotate

Click on the Rotate tool (R) and Click LMB on the object. It will switch sides of the track and rotate 180 degrees. The direction that a trackside object faces is controlled by the selection of Geographic region for the route.

TRS19 object get.jpg Get Object

Click on the Get Object (G) tool and then Click LMB on an object already placed at the trackside. The object selected now appears in the selection window. Change the mode to Add Object (A) and Click LMB again at another point on the track where you wish to place another copy of the newly selected object.

TRS19 object delete.jpg Delete Object

Select Delete Object (D) then Click LMB to delete a trackside object. Continue Clicking LMB to delete a number of objects. If you click on the wrong object, click on Undo (Ctrl-Z) to undo the last action and replace the last deleted object.

Junction direction.jpg Junction Direction

To change the default direction of travel (for when you drive on this track in the Driver module), Click LMB on the Junction Direction (J) tool and then Click LMB once on the green and red arrows. The direction of travel will be changed (green denoting the default direction). You can also make 3-way turnouts by simply adding a third track to the turnout. There are now three direction arrows.

TRS19 Edit properties.jpg Define Name

Click the Define Name (N) tool and click again on the turnout. A dialogue box opens allowing you to type a name for the turnout in the box. Click the Check (proceed) icon to save the name and proceed.

Trackmark Mode

Tracks3.jpg

The third mode in the Track Menu is Trackmark Mode. Trackmark mode is used for the management of Trackmarks and Triggers. These are used to assist in setting up the rules for a session, which allows you to design operations for your route. Click LMB on the Trackmark Mode (V) to change the Track Tab menu to the Trackmark Mode menu.

TRS19 Object add.jpg Add Trackmark

To add a Trackmark, Click LMB on the Add Trackmark (A) button. Click LMB at a point on the track. A trackmark will be placed on the track and will be “attached” to it. So if you move the track it will move with it.

TRS19 Object move.jpg Move Trackmark

Click LMB on Move Trackmark (M). Then Click LMB+H on a Trackmark Object on your track. Drag your mouse along the track to move the object to a different position.

TRS19 TSide Rotate.jpg Rotate Trackmark

Select Rotate Trackmark (R) and the default direction of the Trackmark is reversed.

TRS19 object get.jpg Get Trackmark

Click on the Get Trackmark (G) tool and then Click LMB on a trackmark already placed at the track. That trackmark now appears in the selection window. Change the mode to Add Object (A) and Click LMB again at another point on the track where you wish to place another copy of the trackmark.

TRS19 object delete.jpg Delte Trackmark

Select Delete Trackmark (D) then Click LMB on a trackmark to delete it.

TRS19 Edit properties.jpg Define Name

To name your trackmarks so that you can find them again later on and use them in rules, Click LMB on Define Name (N). Then click on the trackmark and a dialogue box comes up where you can name the trackmark.

Advanced

Advanced Trigger Management Tools The advanced settings of the Trackmark tools menu are used to set the radius of triggers. The radius defines the scope of the trigger and is explained in the previous section.

Trigger radius get.jpg Get Radius

Click on the Get Radius tool and then Click LMB on a trigger. The trigger’s radius will now be in the text field adjacent to the button. The triggers have a default radius of 20 meters so this may not appear to have changed.

Trigger radius set.jpg Apply Radius

Click on Apply Radius then Click LMB on a trigger to apply the value in the radius field to that trigger.

Trigger radius adjust.jpg Edit Radius

Click on Edit Radius then Click LMB on a trigger and drag the mouse with the LMB still being held down to change the trigger radius. There is no visual indication of the radius as you drag it however. Use Get Radius to find out the new radius of that trigger.

See Also
Personal tools