ValidationErrors

From TrainzOnline
(Difference between revisions)
Jump to: navigation, search
(Created page with "Validation Error (VE) numbers are logged during content validation, to allow users to look up particular validation messages to better understand the source of the problem. No...")
 
Line 8: Line 8:
 
''Please note that this page is a work in progress and is incomplete.''
 
''Please note that this page is a work in progress and is incomplete.''
  
−
1 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
+
{|
−
2 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
+
|-|1||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
−
3 "No value has been entered for tag '$(TAG_NAME).'"
+
|-|2||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
−
4 "'$(TAG_NAME)' must have a positive value."
+
|-|3||"No value has been entered for tag '$(TAG_NAME).'"
−
5 "No value has been entered for tag '$(TAG_NAME).'"
+
|-|4||"'$(TAG_NAME)' must have a positive value."
−
6 "'$(TAG_NAME)' must not be zero."
+
|-|5||"No value has been entered for tag '$(TAG_NAME).'"
−
7 "No value has been entered for tag '$(TAG_NAME).'"
+
|-|6||"'$(TAG_NAME)' must not be zero."
−
8 "The value for '$(TAG_NAME)' must be between '$(MIN)' and '$(MAX)' but was specified as '$(VALUE)'."
+
|-|7||"No value has been entered for tag '$(TAG_NAME).'"
−
 
+
|-|8||"The value for '$(TAG_NAME)' must be between '$(MIN)' and '$(MAX)' but was specified as '$(VALUE)'."
−
9 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
+
|-|
−
10 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
+
|-|9||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
−
11 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
+
|-|10||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
−
12 "No string-table entry found with tag '$(VALUE)' for for string-token tag '$(TAG)'."
+
|-|11||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
−
13 "Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
+
|-|12||"No string-table entry found with tag '$(VALUE)' for for string-token tag '$(TAG)'."
−
14 "Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
+
|-|13||"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
−
15 "Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
+
|-|14||"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
−
16 "Container '$(CONT_NAME)' does not have an 'att-parent' tag which is required to reference an attachment point."
+
|-|15||"Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
−
17 "Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
+
|-|16||"Container '$(CONT_NAME)' does not have an 'att-parent' tag which is required to reference an attachment point."
−
18 "Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
+
|-|17||"Attachment point '$(TAG_NAME)' in '$(CONT_NAME)' must be found in mesh '$(MESH_NAME)'."
−
19 "Effect '$(EFFECT_NAME)' in '$(CONT_NAME)' was not found within the mesh table."
+
|-|18||"Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
−
20 "Mesh '$(MESH_NAME)' referenced in '$(CONT_NAME)' was not found within the mesh table."
+
|-|19||"Effect '$(EFFECT_NAME)' in '$(CONT_NAME)' was not found within the mesh table."
−
21 "Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
+
|-|20||"Mesh '$(MESH_NAME)' referenced in '$(CONT_NAME)' was not found within the mesh table."
−
22 "Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
+
|-|21||"Attachment point '$(TAG_VAL)' referenced by tag '$(TAG_NAME)' in '$(CONT_NAME)' was not found."
−
23 "Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
+
|-|22||"Missing or invalid selection for tag '$(TAG_NAME)' in '$(CONT_NAME)'."
−
24 "Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
+
|-|23||"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
−
25 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
+
|-|24||"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
−
26 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
+
|-|25||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
−
27 "The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have a mesh file extension."
+
|-|26||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is empty."
−
28 "The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an image file extension."
+
|-|27||"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have a mesh file extension."
−
29 "The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an animation file extension."
+
|-|28||"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an image file extension."
−
30 "The tag '$(TAG_NAME)' in '$(CONT_NAME)' refers to a nonexistent file: '$(FILENAME)'."
+
|-|29||"The tag '$(TAG_NAME)' in '$(CONT_NAME)' must have an animation file extension."
−
31 "Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
+
|-|30||"The tag '$(TAG_NAME)' in '$(CONT_NAME)' refers to a nonexistent file: '$(FILENAME)'."
−
32 "Alias mesh requires valid parent asset."
+
|-|31||"Invalid tag name '$(TAG_NAME)' in container '$(CONT_NAME)'."
−
33 "Alias mesh '$(FILE)' not found in dependency $(KUID)."
+
|-|32||"Alias mesh requires valid parent asset."
−
34 "Alias mesh '$(FILE)' not found in latest version ($(NEW_KUID)) of dependency $(OLD_KUID)."
+
|-|33||"Alias mesh '$(FILE)' not found in dependency $(KUID)."
−
35 "Required alias mesh asset $(KUID) is missing and cannot be validated."
+
|-|34||"Alias mesh '$(FILE)' not found in latest version ($(NEW_KUID)) of dependency $(OLD_KUID)."
−
36 "The texture '$(FILE)' failed to load."
+
|-|35||"Required alias mesh asset $(KUID) is missing and cannot be validated."
−
37 "The texture '$(FILE)' is not a power of 2, please resize it."
+
|-|36||"The texture '$(FILE)' failed to load."
−
38 "The texture '$(FILE)' is not square. Cubemap textures need to have the same width and height."
+
|-|37||"The texture '$(FILE)' is not a power of 2, please resize it."
−
39 "The texture '$(FILE)' is a uniform color."
+
|-|38||"The texture '$(FILE)' is not square. Cubemap textures need to have the same width and height."
−
40 "Unable to load $(TYPE) texture '$(TEXTURE)' for texture file '$(FILE)'."
+
|-|39||"The texture '$(FILE)' is a uniform color."
−
41 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
+
|-|40||"Unable to load $(TYPE) texture '$(TEXTURE)' for texture file '$(FILE)'."
−
42 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
+
|-|41||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Integer value."
−
43 "The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Boolean value."
+
|-|42||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Decimal value."
−
44 "Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
+
|-|43||"The tag '$(TAG_NAME)' in container '$(CONT_NAME)' is not a valid Boolean value."
−
45 "The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
+
|-|44||"Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
−
46 "Internal Error: The template does not specify that a smoke container is valid in the container being parsed."
+
|-|45||"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
−
47 "Container '$(CONT_NAME)' is not permitted in this section."
+
|-|46||"Internal Error: The template does not specify that a smoke container is valid in the container being parsed."
−
48 "This asset uses an obsolete trainz-build number. Trainz-build numbers below $(LOWEST_TRAINZBUILD) are no longer supported."
+
|-|47||"Container '$(CONT_NAME)' is not permitted in this section."
−
49 "Required tag 'kind' is not present. Ensure this is a valid config file."
+
|-|48||"This asset uses an obsolete trainz-build number. Trainz-build numbers below $(LOWEST_TRAINZBUILD) are no longer supported."
−
50 "Unsupported kind '$(KIND)'."
+
|-|49||"Required tag 'kind' is not present. Ensure this is a valid config file."
−
51 "Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
+
|-|50||"Unsupported kind '$(KIND)'."
−
52 "The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
+
|-|51||"Tag '$(TAG_NAME)' in the container '$(CONT_NAME)' is obsolete."
−
53 "This container is no longer supported."
+
|-|52||"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
−
54 "The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
+
|-|53||"This container is no longer supported."
−
55 "This container is no longer supported."
+
|-|54||"The Tag '$(TAG_NAME)' is not permitted within a container of type '$(CONT_NAME)'."
−
56 "Container '$(CONT_NAME)' is not permitted in this section."
+
|-|55||"This container is no longer supported."
−
57 "Container '$(CONT_NAME)' is not permitted in this section."
+
|-|56||"Container '$(CONT_NAME)' is not permitted in this section."
−
58 "The tag '$(TAG_NAME)' is not a valid container type (expected '$(TYPE)')."
+
|-|57||"Container '$(CONT_NAME)' is not permitted in this section."
−
59 "Internal error: unknown dataType - kind '$(KIND)'."
+
|-|58||"The tag '$(TAG_NAME)' is not a valid container type (expected '$(TYPE)')."
−
60 "Required tag '$(TAG_NAME)' was missing and has been set to default."
+
|-|59||"Internal error: unknown dataType - kind '$(KIND)'."
−
61 "Required tag '$(TAG_NAME)' was missing and has been set to default."
+
|-|60||"Required tag '$(TAG_NAME)' was missing and has been set to default."
−
62 "Required container '$(CONT_NAME)' is missing."
+
|-|61||"Required tag '$(TAG_NAME)' was missing and has been set to default."
−
63 "The cubemap texture '$(FILE)' has missing images. Please verify the texture.txt file."
+
|-|62||"Required container '$(CONT_NAME)' is missing."
−
64 "Cubemap texture '$(FILE)' contains images of different sizes."
+
|-|63||"The cubemap texture '$(FILE)' has missing images. Please verify the texture.txt file."
−
65 "The *.texture.txt file is missing for texture resource '$(FILE)'."
+
|-|64||"Cubemap texture '$(FILE)' contains images of different sizes."
−
66 "The texture file '$(FILE)' contains non-ANSI characters. Textures must be ANSI."
+
|-|65||"The *.texture.txt file is missing for texture resource '$(FILE)'."
−
67 "The texture '$(FILE)' does not seem to have a primary texture set. Please verify the texture.txt file."
+
|-|66||"The texture file '$(FILE)' contains non-ANSI characters. Textures must be ANSI."
−
68 "The primary and alpha texture are not the same size for '$(FILE)'."
+
|-|67||"The texture '$(FILE)' does not seem to have a primary texture set. Please verify the texture.txt file."
−
69 "Binary conversion failed for texture resource '$(FILE)'."
+
|-|68||"The primary and alpha texture are not the same size for '$(FILE)'."
−
70 "The KUID tag is not a valid KUID value: '$(string)'."
+
|-|69||"Binary conversion failed for texture resource '$(FILE)'."
−
 
+
|-|70||"The KUID tag is not a valid KUID value: '$(string)'."
−
129 "Incorrect number of values for the tag '$(TAG_NAME)', expected $(NUM_0) values, found $(NUM_1)."
+
|-|129||"Incorrect number of values for the tag '$(TAG_NAME)', expected $(NUM_0) values, found $(NUM_1)."
−
130 "Too many values for the tag '$(TAG_NAME)', maximum is $(MAX) values, found $(FOUND)."
+
|-|130||"Too many values for the tag '$(TAG_NAME)', maximum is $(MAX) values, found $(FOUND)."
 +
|}

Revision as of 18:15, 9 May 2016

Validation Error (VE) numbers are logged during content validation, to allow users to look up particular validation messages to better understand the source of the problem. Normal logs provide a substantial amount of technical detail about the error, but typically assume that the reader is familiar with the subject matter and will understand why the log is relevant. This wiki provides the necessary background information to understanding many of the logs, however a user who is unfamiliar with the area in question may not know where to start looking. VE numbers allow users to quickly find relevant pages in the wiki without any prior knowledge of the subject.

This page serves as a master guide to all VE numbers currently logged by Trainz. This page does not provide detailed information on any given VE number- please refer to the individual VE number pages for specific details. The error text here is correct for the English localisation of Trainz at the time of writing, however the exact text may change from time to time. It is intended that the overall meaning of a VE number will never change- new VE numbers will be issued instead, and old VE numbers may be made obsolete.

Logs which lack VE numbers do not belong on this page.


Please note that this page is a work in progress and is incomplete.

Retrieved from "https://online.ts2009.com/mediaWiki/index.php?title=ValidationErrors&oldid=8831"
Personal tools