Session Rule List with Parameters

Revision as of 02:16, 7 September 2017

Session Rule List (Work in progress) This is a list of the Trainz Session Rules: These rules can be copied and pasted to show how you're programming your Session

Achievement Check Rule: This rule allows you to customize session gameplay based on whether the player has received an achievement.

Parameters: ??

Advanced Industry Load Configuration Rule: Names industry, lock train's controls, overrides begin load and begin unload

Parameters:

Target Object: value: name the object such as Power Station, Coal Pit, Portal, etc.
Lock train's controls: value: checked, during a stopped load/unload operation
Override 'begin load' and 'begin unload' durations to_seconds: value: check, number of seconds to override

ATP Speed Limited: This rule limits speed over set limit

Parameters:

Speed limit over the set limit: value: mph

AWS Configuration: This rule configures the Trainz implementation AWS

Parameters:

Active: value: fill-in
Passive: value: fill-in
Passive with HUD hidden: value: fill-in
Simulate AWS for unfitted cabs?: value: check
Use modern sound set for unfitted cabs?: value: check

Cab Controls HUD: This rule is OBSOLETE! Cab-mode control HUD now integrated into Driver

Cinematic Camera: This Rule provides several different cinematic style cameras

Parameters:

 Lock camera controls for the duration: value: check
 Prevent train control for duration: value: check
 Camera target: value: name, any of the many objects in the session
 Camera mode: value: fill-in, Stationary, Circle targeted object, Move from one point to another(zoom, pan,etc)
 Initial Camera Values: number: value, Pitch, Yaw, Zoom
 Total time to animate: value: number in seconds

Clean Up Derailed Trains: This rule cleans up derailed traincars

Parameters:

 Set delay to clean up derailed train cars to: value: hrs, min,sec

Clock Rule: Rule needed for animated clocks, you need to apply this rule to your session to make use of the animated clocks, see forum for code to include in you clock object to work with this rule

Parameters:

 Scripted clocks: value: ?? This rule send message to update the clocks on your map, only scripted clocks will work with this rule

Close Message Popups: This rule closes message popup

Parameters:

 None

Consist Check: Checks for a specific train, can be disabled

Parameters:

 Enforce strict exclusive testing: value: check
 Rule Disabled: value: fill-in
 Complete whenever a train matching the description exists: consist list: fill-in
    Note: one of the fill-ins must be indicated

ConsistDataHandler Rule: Helps to place on a route a consist. Consist databundle datahandler. This rule is used by the QuickDrive Rule to add consists on routes while thery are running in Driver Mode. This rule has no input/outputs of its own, please refer to the QuickDrive rule to acces its funtionality.

Parameters:

 None

Control Check Rule: Activates child rules based on the control method changes

Parameters:

 Execute child rules when: DCC mode is selected or Cab mode is selected: value: fill-in
 Execute child rules: Every time control method is set or once only: fill-in 
 Note: must choose one or the other

Control Type: Sets control types

Parameters:

 Current control method is: Easy Mode, Ask User, Realistic Mode: value: Choice
 Note: One of the three

Coupler Breakage Check: Checks for breaking coupiers

Parameters:

 None

Coupler Breakage HUD: HUD displays warning about coupler stress and breakage

Parameters:

 Show the Coupler Breakage Display: value: fill-in
 Hide the Coupler Breakage Display: value: fill-in
 Note: must choose one or the other

CPC:Emit Train: Used to emit trains from the Central Portal Control on Triggered Events. Also works with the Un-Portal Rule

Parameters:

 Portal Index from CPC: value: number
 Use Unportal: value: yes/no
 Delay from Trigger to Emit: value: number in seconds

CPC:Emit Train on Trigger: Used to emit trains fromthe Central Portal Control on Triggers. Also works with the Un-Portal Rule

Parameters:

 Portal Index from PCP: value: number
 Use Un-Portal: value: yes/no
 Delay from Trigger to Emit: value: number in seconds
 Trigger: value: add Trigger

Custom Script: Custom scripted rule

Parameters:

 None

Destination Sign Table: Table for creating a table of destination signs

Parameters:

 Destination Name: value: Name
 Import destination from texture-group:  Select texture-group: value: Name
 Enable industries/stations as destinations: value: check
 Enable Track Marks as destinations: value: check
 Enable table of destinations: value: check

Disable/Enable Industry: Disables vehicle load/unload for industry

Parameters:

 Load/Unload for industry: value: Disable/Enable value: choose Industry
 Apply to every vehicle in the session: value: fill-in
 Apply only to a specific vehicle list: value:  fill-in values: Add vehicle/Add all vehicles/ Remove all vehicles
 Note: One of the Applies must be selected

Display Custom HUD: Show or hide the Custom Heads Up Display

Parameters:

 Show the Custom Heads Up Display: value: fill-in
 Hide the Custom Heads Up Display: value: fill-in
 Note: One must be chosen

Display HTML Pages: Creates a browser to display the listed HTML files in order as a navigatable sequence of pages

Parameters:

 Add Page: value: From Source Asset
 Add All: value: From Source Asset
 Delete All: value: From Source Asset
 Set browser parameters:
   Prevent user from exiting browser until all pages viewed: value: check
   Disable closing of browser window by user: value: check
   Disable browser window scrolling: value: check
   Make browser window invisible: value: check
   Set position-Under Construction!!!: value: check
   Set size-Under Construction!!!: value: check
 Use the page
   Index html: value: page name
 From asset HTML
   Click to select: value: HTML Assets as the hidden button

Display Video: Displays a page from a HTML asset in a browser window

Parameters:

 Display page index html: value: HTML page Name
 of html assets value: click, select type
 Note: also can give the video a Name

Driver Command: Specify which commands will be available for the drivers

Parameters:

 Cab: Set Control- Sets a cab node control
 Cab: Wait- Maintains current control state until some condition is met
 Change Destination Sign- Changes the destination signs of a train
 Couple- Couple train to designated vehicle
 Decouple- Decouples the train at the specified vehicle
 Delete Train- Causes the train and its driver to be deleted from the session
 Drive Schedule- Driver command that causes the driver character to carry out the tasks specified by his train's schedule
 Drive To- Allows a driver character to take a train either to a destination industry or a specific track in a destination industry.  Will take the shortest path to get there
 Drive To Industry- Drive to a specific Industry
 Drive to Track mark- Driver command that allows a driver character to take a train to a specific trackmark on the map.  Will take the shortest path to get there
 Drive Via Track mark- Driver command that allows a driver character to take a train through a specific trackmark for its journey. Will take the shortest path to get there
 Drive To Station V2- No description
 Drive To Track mark Kist V2- No description
 Halt Train- Brings the train to a complete stop
 Headlights On/Off-Allows the driver to switch the headlights on and off
 Hornz- Driver sounds the train horn
 Instant Load Command- Instantly load a train with a random product selected from its product que.  InstanLoad will not load locos or loco tenders
 Instant Load Locos- Instantly load all locos in a train-useful for trains generated automatically by portals etc.  All locos with product queues(eg Phil_Cs) and all tenders will have all available ques loaded
 InstantUnload- Instantly unload a train-useful for trains generated automatically by portal etc. Every product que found in each industry-activated car will be unloaded.  InstantUnload will not unload locos or loco tenders
 Interior Lights Command- Driver command to switch interior lights on or off for the current train
 Load- Loads the train's vehicles at the industry the driver is currently at with the train
 MoveTurntable- TRS2008: Move turntable to a stop point
 Navigate To- Allows a driver character to take a train either to a destination iindustry or a specific track in a destinatin industry.  Will attempt to route around trains to get there
 Navigate To Trackmark- Driver command that allows a driver character to take a train to a specific trackmark on the map.  Will attempt to route around trains to get there
 Navigate Via Trackmark- Driver command that allows a driver character to take a train through a specific trackmark for its journey.  Will attempt to route around trains to get there
 NavigateToStation V2- No description
 NavigateToTrackMarkList V2- Noi description
 Notify- Notifies the player of schedule progress/completion
 ReleaseJuncion- Lets a driver release the junction they have been holding
 ReverseTram- Reverse a tram(max 2 cars)
 Run Around- Instructs the driver to uncouple his locomotive from and run-around it to recouple up to the other end of the train
 Set Max Speed To- No description
 Terminate Passenger Train- This command wil terminate a passenger train at the current passenger station.  This will cause all of the passengers to disembark for the traiin.  You must issue a 'Drive To' command for a passenger 
   station before using this command
 UnCouplerFrom- A new Uncople driver command that allows you to uncouple from vehicle number (with 0 being the first vehicle in the consist)
 Unload- Unload train vehicles at current industry location
 VR Set Train Lamps-Driver command that sets the train lamps
 WaitFor- Pauses the driver's scheule or optionally random period of time
 WaitForRandom- TRS2008: Wait for specified or optionally random period of time
 WaitForTrigger- Tell a driver to wait until a trigger you select is touched by a train you select(or any train)
 WaitUntil- No description

Driver Command Check: Verifies the driver comands of a driver character

Parameters:

 Trigger rule once: Value: check
 Driver character to watch the commands list of: value: name Driver
 Wait for a driver character to have a command list that matches this: Add Driver command: Value: add driver command, Add All, Delete All

Driver Main Menu Options: Show the Driver Main Menu Bar

Parameters:

 The Driver Main Bar: Value: Show/Hide choice

Driver Schedule Rule: Execution of basic scheduled commands

Parameters:

 Driver Schedule Rule assigned to: Value: Name Driver
 Commands: Value: Insert Driver Commands in Drive Schedule
 Classic style: If there is a schedule running, do not emit a new schedule: value: fill-in
 Killer style: If there is a schedule running, clean it and emit a new one: value: fill-in
 Cooperative style: If there is a schedule running, append the new one: value: fill-in
 Active style:  Emit a new schedule, only if already there is a schedule running: value: Fill-in
 NOTE: Only one of the fill-in can be choosen

Driver Setup: Create the list of drivers for this session, and assign them their orders

Parameters:

 The following drivers will be available: Value: Add drivers name
 Remove all existing Drivers first: Value: check
 Generate new Drivers for empty trains(In addition to those detailed above, new drivers will be generated for any empty trains): Value: check

EIRS Weather Rule NE USA: Customise random weather rule relative to the north east region of the United States

Parameters:

 Set season to Summer/Winter/Fall/Spring : value: Choice
 Change every minutes: value: number of minutes
 Environmental impact Disable/Enable: Value: Choice

Enable/Disable Driver Commands: enable/Disable specific driver commandson certain drivers

Parameters:

 The following driver commands for all driver characters on trains the match the criteria below: Value: Check Driver Commands
 Train criteria, All trains: Value: fill-in
 Train criteria, Only trains matching criteria: Value: List train criteria

End Session: End the session without saving session

Parameters:

 End the session. Fade out over seconds: Value: number of seconds

Fade in/out: Fade in or out within seconds, color and opacity considered

Parameters:

 Red percentage: value: percent amount
 Green percentage: value: percent amount
 Blue percentage: value: percent amount
 Alpha percentage(opacity): percent amount
 Fading duration: value: number of seconds
 NOTE:  Sets or removes overlay color, black = 0% all colors, white = 100% of all colors, fade out = alpha near 100%, fade in = alpha at 0%, make one rule to fade in and another rule to fade out

Flash HUD icon: Flashes a HUD panel icon for a set duration of time or instructs a HUD panel icon to start/stop flashing

Parameters:

 Flash HUD Panel selection: value: Bottom Right Menu, Camera Controls, DCC Controls, Driver Main Menu
   Icon: value: depends on HUD Panel selection
   Time duration in seconds: value: number of seconds
 Start/Stop: value: Start or Stop
   Select HUD Panel: value:  see above
   Icon: value: depends on HUD Panel selection
 Note: Either Flash or Start/Stop must be choosen

Generic TreeNode Debug Window: No description

Parameters:

 None

InputTable: Creating a list of messages names to be used for various purposes

Parameters:

 Add: Value: Message Name

Interlocking Tower Configuration Path: Alters settings on an interlocking tower path

Parameters:

  Interlocking Tower: Value: Set name and objects

Interlocking Tower Path Selection UI: Will automatically react to messages from interlocking Towers and display a path selection dialog to the player. If you wish to disable teh interface simply remove this rule from your

    session

Parameters:

 Show path activation messages in Driver: Value: Check

Interlocking Tower Set Path: Will set the stae of an interlocking tower path for a train

Parameters:

 Interlocking Tower: Value: Name and Objects

MaxPermittedSpeed: Controls AI behavior, when active AI trains only go as fast as permitted

Parameters:

 Config.txt file: Value: Set the 'max_permitted_speed-60850 tag in mph or kph
 Add: Value: <KUID2:60850:88000:4> to config.txt and kuid-table for compatible. Old root level config tag will show warning in CMP and problems in foreign language builds

Message Popup: Displays a pop-up message in a browser window and waits for it to be closed

Parameters:

 Pause game while message is displayed: Value: Check
 Close previous message popup windows: Value: Check
 Message location: Value: Top Lift, Top Right, Bottom Left, Bottom Right
 Message source: Custom text/ A pre-defined HTML page(advanced), A pre-defined string-table entry from a HTML asset(advanced): Value: Choose one
    Note: Choices of source determine multiple inputs.  Can write custom text in text box

Session Rule List with Parameters

Revision as of 02:16, 7 September 2017

Views

Personal tools

Navigation

Search

Toolbox