Driver Commands List

From TrainzOnline
(Difference between revisions)
Jump to: navigation, search
m (Wait Until II)
m (added known issue for commands that use variables, removed <u> tags)
Line 53: Line 53:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8203:56> AddMissionCode (SP2 and later)'''
 
*'''<kuid2:61392:8203:56> AddMissionCode (SP2 and later)'''
Line 59: Line 59:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<mission codes>''''' - select a mission code from the Session list
 
   '''''<mission codes>''''' - select a mission code from the Session list
Line 66: Line 66:
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#RemoveMissionCode (SP2 and Later)|RemoveMissionCode (SP2 and Later)]]''' - sets a mission code for the train
 
*'''[[#RemoveMissionCode (SP2 and Later)|RemoveMissionCode (SP2 and Later)]]''' - sets a mission code for the train
 
*'''[[#SetMissionCode (SP2 and Later)|SetMissionCode (SP2 and Later)]]''' - removes a mission code from those already set for the train
 
*'''[[#SetMissionCode (SP2 and Later)|SetMissionCode (SP2 and Later)]]''' - removes a mission code from those already set for the train
Line 91: Line 91:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8114:54> IT CancelEnhancedPath'''
 
*'''<kuid2:61392:8114:54> IT CancelEnhancedPath'''
Line 97: Line 97:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''<Select EIT>''' - select from list of session EITs
 
   '''<Select EIT>''' - select from list of session EITs
Line 107: Line 107:
 
#An active path is automatically cancelled after it has been completed by a train
 
#An active path is automatically cancelled after it has been completed by a train
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active path
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active path
  
Line 127: Line 127:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8111:54> IT SetPath'''
 
*'''<kuid2:61392:8111:54> IT SetPath'''
Line 133: Line 133:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
Line 142: Line 142:
 
#An active path is automatically cancelled after it has been completed by a train
 
#An active path is automatically cancelled after it has been completed by a train
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT SetPathAndWaitActive|IT SetPathAndWaitActive]]''' - sets an active IT or EIT path and waits until it is active
 
*'''[[#IT SetPathAndWaitActive|IT SetPathAndWaitActive]]''' - sets an active IT or EIT path and waits until it is active
Line 164: Line 164:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8113:54> IT SetPathAndWaitActive'''
 
*'''<kuid2:61392:8113:54> IT SetPathAndWaitActive'''
Line 170: Line 170:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
Line 179: Line 179:
 
#An active path is automatically cancelled after it has been completed by a train
 
#An active path is automatically cancelled after it has been completed by a train
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active IT or EIT path
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active IT or EIT path
Line 201: Line 201:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8112:54> IT SetPathAndWaitNotRed'''
 
*'''<kuid2:61392:8112:54> IT SetPathAndWaitNotRed'''
Line 207: Line 207:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
 
   '''<Select IT or EIT>''' - select from list of session ITs and/or EITs
Line 216: Line 216:
 
#An active path is automatically cancelled after it has been completed by a train
 
#An active path is automatically cancelled after it has been completed by a train
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT CancelEnhancedPath|IT CancelEnhancedPath]]''' - cancels an active EIT path
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active IT or EIT path
 
*'''[[#IT SetPath|IT SetPath]]''' - sets an active IT or EIT path
Line 237: Line 237:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8204:56> RemoveMissionCode (SP2 and later)'''
 
*'''<kuid2:61392:8204:56> RemoveMissionCode (SP2 and later)'''
Line 243: Line 243:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<mission codes>''''' - select a mission code from the Session list
 
   '''''<mission codes>''''' - select a mission code from the Session list
Line 250: Line 250:
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#AddMissionCode (SP2 and Later)|AddMissionCode (SP2 and Later)]]''' - adds another mission code to the train
 
*'''[[#AddMissionCode (SP2 and Later)|AddMissionCode (SP2 and Later)]]''' - adds another mission code to the train
 
*'''[[#SetMissionCode (SP2 and Later)|SetMissionCode (SP2 and Later)]]''' - removes a mission code from those already set for the train
 
*'''[[#SetMissionCode (SP2 and Later)|SetMissionCode (SP2 and Later)]]''' - removes a mission code from those already set for the train
Line 275: Line 275:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:8201:56> SetMissionCode (SP2 and later)'''
 
*'''<kuid2:61392:8201:56> SetMissionCode (SP2 and later)'''
Line 281: Line 281:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<*Reset mission code>''''' - resets the currently loaded mission code, or
 
   '''''<*Reset mission code>''''' - resets the currently loaded mission code, or
Line 289: Line 289:
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
 
:The mission code must be created by the '''Mission Code Manager Rule (SP2 and Later)''' using paths created with '''Interlocking Towers'''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#AddMissionCode (SP2 and Later)|AddMissionCode (SP2 and Later)]]''' - adds another mission code to the train
 
*'''[[#AddMissionCode (SP2 and Later)|AddMissionCode (SP2 and Later)]]''' - adds another mission code to the train
 
*'''[[#RemoveMissionCode (SP2 and Later)|RemoveMissionCode (SP2 and Later)]]''' - sets a mission code for the train
 
*'''[[#RemoveMissionCode (SP2 and Later)|RemoveMissionCode (SP2 and Later)]]''' - sets a mission code for the train
Line 330: Line 330:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:131986:1011> ControlJunction'''
 
*'''<kuid:131986:1011> ControlJunction'''
Line 336: Line 336:
 
*'''DLS Command''' by '''atilabarut'''
 
*'''DLS Command''' by '''atilabarut'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''Select switch direction''', one of '''''<LEFT/RIGHT/FORWARD>'''''
 
   '''Select switch direction''', one of '''''<LEFT/RIGHT/FORWARD>'''''
 
       '''Select ''<switch name>''''' from the session list
 
       '''Select ''<switch name>''''' from the session list
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#SetOneJunction|SetOneJunction]]''' - sets the direction for a single specified junction switch
 
*'''[[#SetOneJunction|SetOneJunction]]''' - sets the direction for a single specified junction switch
 
<br>
 
<br>
Line 359: Line 359:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:121843:100445> SetOneJunction'''
 
*'''<kuid:121843:100445> SetOneJunction'''
Line 365: Line 365:
 
*'''DLS Command''' by '''pitkin'''
 
*'''DLS Command''' by '''pitkin'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''Select ''<switch name>''''' from the session list
 
   '''Select ''<switch name>''''' from the session list
 
       '''Select switch direction''', one of ''<LEFT/RIGHT/FORWARD/BACKWARD>'''''
 
       '''Select switch direction''', one of ''<LEFT/RIGHT/FORWARD/BACKWARD>'''''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#ControlJunction|ControlJunction]]''' - sets the direction for a single specified junction switch
 
*'''[[#ControlJunction|ControlJunction]]''' - sets the direction for a single specified junction switch
  
Line 389: Line 389:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:368725:60003:6> Set Signal Ahead'''
 
*'''<kuid2:368725:60003:6> Set Signal Ahead'''
Line 395: Line 395:
 
*'''DLS Command''' by '''elstoko'''
 
*'''DLS Command''' by '''elstoko'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<Set next signal to>''''' - select one from
 
   '''''<Set next signal to>''''' - select one from
Line 447: Line 447:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:45324:555017:7> Instant Load Command'''
 
*'''<kuid2:45324:555017:7> Instant Load Command'''
Line 453: Line 453:
 
*'''DLS Command''' by '''norfolksouthern37'''
 
*'''DLS Command''' by '''norfolksouthern37'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 473: Line 473:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:117290:1022:1> InstantLoadLocos'''
 
*'''<kuid2:117290:1022:1> InstantLoadLocos'''
Line 479: Line 479:
 
*'''Built-in Command''' by '''nzhorse'''
 
*'''Built-in Command''' by '''nzhorse'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 499: Line 499:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:67585:1021:2> InstantUnload'''
 
*'''<kuid2:67585:1021:2> InstantUnload'''
Line 505: Line 505:
 
*'''DLS Command''' by '''robin_hoods'''
 
*'''DLS Command''' by '''robin_hoods'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 525: Line 525:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10076> Load'''
 
*'''<kuid:-3:10076> Load'''
Line 531: Line 531:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 555: Line 555:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:75377:84:1> Load At'''
 
*'''<kuid2:75377:84:1> Load At'''
Line 561: Line 561:
 
*'''DLS Command''' by '''stagecoach'''
 
*'''DLS Command''' by '''stagecoach'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
Line 572: Line 572:
 
#With passenger enabled stations the '''Load''' command will first execute an '''Unload''' command to unload some of the passengers.
 
#With passenger enabled stations the '''Load''' command will first execute an '''Unload''' command to unload some of the passengers.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive To|Drive To]]''' - drives to an industry but does not seek alternative paths if blocked
 
*'''[[#Drive To|Drive To]]''' - drives to an industry but does not seek alternative paths if blocked
 
*'''[[#Load|Load]]''' - loads commodities at an industry (including a station)
 
*'''[[#Load|Load]]''' - loads commodities at an industry (including a station)
Line 592: Line 592:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:116387:16:2> Terminate Passenger Train'''
 
*'''<kuid2:116387:16:2> Terminate Passenger Train'''
Line 598: Line 598:
 
*'''Built-in Command''' by '''maggs'''
 
*'''Built-in Command''' by '''maggs'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 621: Line 621:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10077> Unload'''
 
*'''<kuid:-3:10077> Unload'''
Line 627: Line 627:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 672: Line 672:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:151055:100101:3> AI Wait until green signal'''
 
*'''<kuid2:151055:100101:3> AI Wait until green signal'''
Line 678: Line 678:
 
*'''DLS Command''' by '''erendir'''
 
*'''DLS Command''' by '''erendir'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 
   '''Ждать, пока не будет зелёный >''' - Translation: "Wait until it is green >"  
 
   '''Ждать, пока не будет зелёный >''' - Translation: "Wait until it is green >"  
 
       '''На любом светофоре''' - Translation: "At any traffic light" - select for the next signal up to 3000m ahead
 
       '''На любом светофоре''' - Translation: "At any traffic light" - select for the next signal up to 3000m ahead
Line 699: Line 699:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:70791:9001:1> Change Train Direction'''
 
*'''<kuid2:70791:9001:1> Change Train Direction'''
Line 705: Line 705:
 
*'''Built-in Command''' by '''mgalling'''
 
*'''Built-in Command''' by '''mgalling'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 725: Line 725:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:401543:1090> Halt Train'''
 
*'''<kuid:401543:1090> Halt Train'''
Line 731: Line 731:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 751: Line 751:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:450022:90001:2> Set Max Speed To'''
 
*'''<kuid2:450022:90001:2> Set Max Speed To'''
Line 757: Line 757:
 
*'''DLS Command''' by '''nikkia'''
 
*'''DLS Command''' by '''nikkia'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<No maximum speed>''' or '''<value>''' in mph
 
  Select '''<No maximum speed>''' or '''<value>''' in mph
Line 764: Line 764:
 
:The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another '''Set Max Speed To''' command.
 
:The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another '''Set Max Speed To''' command.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Set Max Speed To (km/h)|Set Max Speed To (km/h)]]''' - set the maximum speed in km/h
 
*'''[[#Set Max Speed To (km/h)|Set Max Speed To (km/h)]]''' - set the maximum speed in km/h
  
Line 783: Line 783:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:450022:90002> Set Max Speed To (km/h)'''
 
*'''<kuid:450022:90002> Set Max Speed To (km/h)'''
Line 789: Line 789:
 
*'''DLS Command''' by '''nikkia'''
 
*'''DLS Command''' by '''nikkia'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<No maximum speed>''' or '''<value>''' in km/h
 
  Select '''<No maximum speed>''' or '''<value>''' in km/h
Line 796: Line 796:
 
:The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another '''Set Max Speed To''' command.
 
:The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another '''Set Max Speed To''' command.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Set Max Speed To|Set Max Speed To]]''' - set the maximum speed in mph
 
*'''[[#Set Max Speed To|Set Max Speed To]]''' - set the maximum speed in mph
  
Line 815: Line 815:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10090> WaitFor'''
 
*'''<kuid:-3:10090> WaitFor'''
Line 821: Line 821:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<time delay>''' from list
 
  Select '''<time delay>''' from list
Line 829: Line 829:
  
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Wait Until II|Wait Until II]]''' - sets the wait to a set clock time
 
*'''[[#Wait Until II|Wait Until II]]''' - sets the wait to a set clock time
  
Line 849: Line 849:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:57344:80001:5> WaitFor'''
 
*'''<kuid2:57344:80001:5> WaitFor'''
Line 855: Line 855:
 
*'''Built-in Command''' by '''marinus'''
 
*'''Built-in Command''' by '''marinus'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<trigger name>''' from the session list
 
  Select '''<trigger name>''' from the session list
Line 881: Line 881:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:32711:100025> Wait Until II'''
 
*'''<kuid:32711:100025> Wait Until II'''
Line 887: Line 887:
 
*'''Built-in Command''' by '''dap'''
 
*'''Built-in Command''' by '''dap'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<hours>''' 1 to 24
 
  Select '''<hours>''' 1 to 24
Line 899: Line 899:
 
* Run-time editing is not available for this command. To edit in Driver the command must be removed first
 
* Run-time editing is not available for this command. To edit in Driver the command must be removed first
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#WaitFor|WaitFor]]''' - sets the wait period for up to 1 hour
 
*'''[[#WaitFor|WaitFor]]''' - sets the wait period for up to 1 hour
 
<br>
 
<br>
Line 928: Line 928:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:7101:1> AutoDrivePastSignal Command'''
 
*'''<kuid2:61392:7101:1> AutoDrivePastSignal Command'''
Line 934: Line 934:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   Select '''''<signal name>''''' from Session list
 
   Select '''''<signal name>''''' from Session list
Line 941: Line 941:
 
*It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
 
*It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#AutoPilot|AutoPilot]]''' - drives continuously or until a specified trackmark has been passed
 
*'''[[#AutoPilot|AutoPilot]]''' - drives continuously or until a specified trackmark has been passed
  
Line 961: Line 961:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:71155:60001:5> Autopilot Command'''
 
*'''<kuid2:71155:60001:5> Autopilot Command'''
Line 967: Line 967:
 
*'''DLS Command''' by '''_mutton_'''
 
*'''DLS Command''' by '''_mutton_'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select one of
 
  Select one of
Line 980: Line 980:
 
:*if the track mark is never reached because the correct path has not been set, the train will continue as it would for the '''activate''' option
 
:*if the track mark is never reached because the correct path has not been set, the train will continue as it would for the '''activate''' option
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#AutoDrivePastSignal|AutoDrivePastSignal]]''' - drives until a specified signal has been passed
 
*'''[[#AutoDrivePastSignal|AutoDrivePastSignal]]''' - drives until a specified signal has been passed
  
Line 999: Line 999:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:11058> Drive To'''
 
*'''<kuid:-3:11058> Drive To'''
Line 1,005: Line 1,005:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
Line 1,013: Line 1,013:
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Navigate To|Navigate To]]''' - will seek alternative paths if blocked
 
*'''[[#Navigate To|Navigate To]]''' - will seek alternative paths if blocked
  
Line 1,032: Line 1,032:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:11149> Drive To Trackmark'''
 
*'''<kuid:-3:11149> Drive To Trackmark'''
Line 1,038: Line 1,038:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of trackmark>''' from the session list
 
  Select '''<name of trackmark>''' from the session list
Line 1,045: Line 1,045:
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
 
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
Line 1,070: Line 1,070:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:11209> Drive Via Trackmark'''
 
*'''<kuid:-3:11209> Drive Via Trackmark'''
Line 1,076: Line 1,076:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of trackmark>''' from the session list
 
  Select '''<name of trackmark>''' from the session list
Line 1,084: Line 1,084:
 
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the designated trackmark. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the designated trackmark. This can lead to the train stopping and waiting indefinately until the blockage is removed.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
 
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
Line 1,109: Line 1,109:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10058> Navigate To'''
 
*'''<kuid:-3:10058> Navigate To'''
Line 1,115: Line 1,115:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
 
  Select '''<name of industry>''' or industry enabled passenger station from the session list
Line 1,123: Line 1,123:
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive To|Drive To]]''' - does not seek alternative paths if blocked
 
*'''[[#Drive To|Drive To]]''' - does not seek alternative paths if blocked
  
Line 1,142: Line 1,142:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10149> Navigate To Trackmark'''
 
*'''<kuid:-3:10149> Navigate To Trackmark'''
Line 1,148: Line 1,148:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of trackmark>''' from the session list
 
  Select '''<name of trackmark>''' from the session list
Line 1,155: Line 1,155:
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
 
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
Line 1,180: Line 1,180:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10209> Navigate Via Trackmark'''
 
*'''<kuid:-3:10209> Navigate Via Trackmark'''
Line 1,186: Line 1,186:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select '''<name of trackmark>''' from the session list
 
  Select '''<name of trackmark>''' from the session list
Line 1,194: Line 1,194:
 
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the designated trackmark. This can lead to the train traveling backwards and down the wrong track.
 
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the designated trackmark. This can lead to the train traveling backwards and down the wrong track.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
Line 1,236: Line 1,236:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:192081:1:7> Copy Commands From'''
 
*'''<kuid2:192081:1:7> Copy Commands From'''
Line 1,242: Line 1,242:
 
*'''Built-in Command''' by '''brummfondel'''
 
*'''Built-in Command''' by '''brummfondel'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Append''' - '''From Library''' - select a saved schedule from Schedule Library and add it to the end of the current schedule (if any)
 
  '''Append''' - '''From Library''' - select a saved schedule from Schedule Library and add it to the end of the current schedule (if any)
Line 1,269: Line 1,269:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:116387:15:3> Delete Train'''
 
*'''<kuid2:116387:15:3> Delete Train'''
Line 1,275: Line 1,275:
 
*'''Built-in Command''' by '''maggs'''
 
*'''Built-in Command''' by '''maggs'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 1,295: Line 1,295:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:160293:101002> Insert buff label'''
 
*'''<kuid:160293:101002> Insert buff label'''
Line 1,301: Line 1,301:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Select ''<label number>''''' - select the label number (1 to 10)
 
  '''Select ''<label number>''''' - select the label number (1 to 10)
Line 1,308: Line 1,308:
 
:Up to 10 labels can be inserted into each drivers command list
 
:Up to 10 labels can be inserted into each drivers command list
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
 
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
 
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
 
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
Line 1,328: Line 1,328:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:160293:101003:2> Jump to label'''
 
*'''<kuid2:160293:101003:2> Jump to label'''
Line 1,334: Line 1,334:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Select ''<label number>''''' - select the label number (1 to 20)
 
  '''Select ''<label number>''''' - select the label number (1 to 20)
Line 1,341: Line 1,341:
 
:A '''label''' ('''Insert Buff label''' driver command) with the matching label number must be added to the driver commands
 
:A '''label''' ('''Insert Buff label''' driver command) with the matching label number must be added to the driver commands
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
 
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
Line 1,361: Line 1,361:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:160293:101080> Layer Control'''
 
*'''<kuid:160293:101080> Layer Control'''
Line 1,367: Line 1,367:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Show ''<list of layers in route and session>''''' - select a layer to make visible
 
  '''Show ''<list of layers in route and session>''''' - select a layer to make visible
Line 1,394: Line 1,394:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:71155:60004:2> Move to train'''
 
*'''<kuid2:71155:60004:2> Move to train'''
Line 1,400: Line 1,400:
 
*'''DLS Command''' by '''_mutton_'''
 
*'''DLS Command''' by '''_mutton_'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''All trains ''<list of locomotives>''''' - select a locomotive from the Session list
 
  '''All trains ''<list of locomotives>''''' - select a locomotive from the Session list
Line 1,427: Line 1,427:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:61392:7006:37> SetCustomHud (SP2 and later)'''
 
*'''<kuid2:61392:7006:37> SetCustomHud (SP2 and later)'''
Line 1,433: Line 1,433:
 
*'''DLS Command''' by '''pguy'''
 
*'''DLS Command''' by '''pguy'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''''<defHud>''''' - select the default HUD
 
  '''''<defHud>''''' - select the default HUD
Line 1,465: Line 1,465:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:160293:101014:3> Skip if session-variable'''
 
*'''<kuid2:160293:101014:3> Skip if session-variable'''
Line 1,471: Line 1,471:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Select ''<label number if>''''' - select the label number (1 to 20)
 
  '''Select ''<label number if>''''' - select the label number (1 to 20)
Line 1,481: Line 1,481:
 
#A '''label''' ('''Insert Buff Label''' driver command) with the matching label number must be added to the driver commands
 
#A '''label''' ('''Insert Buff Label''' driver command) with the matching label number must be added to the driver commands
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
 
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
Line 1,506: Line 1,509:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:160293:101006:3> Wait Until S-variable V3'''
 
*'''<kuid2:160293:101006:3> Wait Until S-variable V3'''
Line 1,512: Line 1,515:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Select ''<Variable Name>''''' - select the variable name from those entered in the '''InputTable Rule'''
 
  '''Select ''<Variable Name>''''' - select the variable name from those entered in the '''InputTable Rule'''
Line 1,519: Line 1,522:
 
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 +
 +
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
  
 
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
Line 1,541: Line 1,547:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:131986:1006:1> WaitUntilSVariable'''
 
*'''<kuid2:131986:1006:1> WaitUntilSVariable'''
Line 1,549: Line 1,555:
 
*'''Legacy Command''' has been replaced by '''Wait Until S-Variable'''
 
*'''Legacy Command''' has been replaced by '''Wait Until S-Variable'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''Select ''<Variable Name><Condition><Value>''''' - from the '''InputTable Rule'''
 
  '''Select ''<Variable Name><Condition><Value>''''' - from the '''InputTable Rule'''
Line 1,556: Line 1,562:
 
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Wait Until S-Variable V3|Wait Until S-Variable V3]]''' - AI driver waits for specified variable condition
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session Rule List with Parameters#InputTable Rule|InputTable Rule]]'''
 +
<br>
 +
<table bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
'''[[#top|Back to Top]]'''
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table width="100%" bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
 
 +
='''Train Operation Commands'''=
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Bellz'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Bellz.png|50px|link=]]</td>
 +
<td>Rings the train bell.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:66277:80002:1> bellz'''
 +
 
 +
*'''Built-in Command''' by '''smileyman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:the locomotive must be equipped with a working bell.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Hornz|Hornz]]''' - gives a blast of the horn (or whistle)
 +
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Couple'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Couple.png|50px|link=]]</td>
 +
<td>The AI driver moves the train (or just the locomotive if it is by itself) to couple with the specified wagon.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10081> Couple'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<list of available wagons>''''' - select a wagon to couple to
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The target wagon must be at the end of a consist or by itself. If the target is coupled in between other wagons then no coupling will take place.
 +
#There must be a clear path to the target wagon.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Couple At Trackmark'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Couple_At_Trackmark.png|50px|link=]]</td>
 +
<td>The AI driver moves the train (or just the locomotive if it is by itself) to couple with the wagon that is closest to a specified trackmark.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:2:57145:81100:1> Couple At Trackmark'''
 +
 
 +
*'''DLS Command''' by '''marzipan'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<list of available trackmarks>''''' - select a trackmark
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The end wagon of a consist must be within the effect radius of the trackmark. If there is no wagon with the radius then no coupling will take place.
 +
#The train will couple to the wagon closest to the trackmark and that may mean navigating to the other end of the consist.
 +
#There must be a clear path to the target wagon.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How to Use Track Markers]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Decouple'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Decouple.png|50px|link=]]</td>
 +
<td>The train is decoupled at the specified wagon (does not work in '''Driver Setup Rule''').</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10082> Decouple'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<list of available wagons>''''' - select a wagon to decouple from
 +
 
 +
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*This command does not work when added to a driver's command list in the '''Driver Setup Rule''' in Surveyor but it does work when manually added to the driver's command list in Driver
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#If programming a driver via the '''Driver Setup Rule''', use the alternative commands '''Decouple DLX''', '''Decouple Number #''', '''Uncouplez''' or '''UncouplezFrom'''
 +
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Decouple DLX'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_DecoupleDLX.png|50px|link=]]</td>
 +
<td>The train is decoupled at the specified wagon identified by name or number (upto 99 wagons), or at a random location.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:160293:100120:2> Decouple DLX'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''When Used in Surveyor using the Driver Setup Rule'''
 +
      '''''<1-33>''''' - select a wagon numbered 1 to 33 where 1 is the wagon (or tender) immediately following the locomotive
 +
      '''''<34-66>''''' - select a wagon from 34 to 66
 +
      '''''<67-99>''''' - select a wagon from 67 to 99
 +
      '''''<at position determined by>'''''
 +
        '''''<consist_count>''''' - requires the use of the '''special_instruction''' driver command
 +
        '''''<a random number>''''' - a random number which may be beyond the last wagon in the consist
 +
  '''When used in Driver Mode'''
 +
      '''''<1-33>''''' - each wagon is numbered and named. Select a wagon numbered 1 to 33 (or to the last wagon in that range)
 +
        where 1 is the wagon (or tender) immediately following the locomotive
 +
      '''If there are more than 33 wagons, then'''
 +
        '''''<34-66>''''' - each wagon is numbered and named. Select a wagon from 34 to 66 (or to the last wagon in that range)
 +
      '''if there are more than 66 wagons, then'''
 +
        '''''<67-99>''''' - each wagon is numbered and named. Select a wagon from 67 to 99 (or to the last wagon in that range)
 +
      '''''<at position determined by>'''''
 +
        '''''<consist_count>''''' - requires the use of the '''special_instruction''' driver command
 +
        '''''<a random number>''''' - a random number upto and including the last wagon in the consist
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Decouple Head N'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Decouple.png|50px|link=]]</td>
 +
<td>The train is decoupled to leave the selected number ('''N''') of wagons left in the consist.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:46162:70002:12> Decouple Head N'''
 +
 
 +
*'''DLS Command''' by '''josefpav'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''<select wagon number>''' - select the number of wagons (sorted by ASCII code not numerical value) to be left in the consist after the decoupling.
 +
        1 = the lead loco only (without its tender), 2 = loco + first wagon (which could be the tender), upto 75.
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Decouple Number #'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_DecoupleNumber.png|50px|link=]]</td>
 +
<td>The specified wagon number (#) and any following wagons will be uncoupled from the locomotive and consist.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:147570:80008:1> Decouple number #'''
 +
 
 +
*'''Built-in Command''' by '''erniesouchak'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<number>''''' - select a wagon number (1-40) to decouple from.
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The first locomotive is #1, the second locomotive (if any) or the tender (on a steam locomotive) is #2, etc.
 +
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Hornz'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Hornz.png|50px|link=]]</td>
 +
<td>Gives one blast of the train horn or whistle.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:66277:80001:2> Hornz'''
 +
 
 +
*'''Built-in Command''' by '''smileyman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 +
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''HornzExtended'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_HornzExtended.png|50px|link=]]</td>
 +
<td>Gives a specified number of blasts of the train horn or whistle.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:478639:100034> HornzExtended'''
 +
 
 +
*'''Built-in Command''' by '''ffccnn'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select one of '''''<Play once>'''''
 +
              '''''<Play twice>'''''
 +
              ... up to ...
 +
              '''''<Play 10 times>'''''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:When the command is executed, the AI will immediately move onto the next command in the sequence and will blast the horn during the execution of the following driver commands until the set count has been reached
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 +
*'''[[#Hornz|Hornz]]''' - gives one blast of the horn or whistle
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''MoveTurntable'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_MoveTurntable.png|50px|link=]]</td>
 +
<td>Moves the specified turntable to the specified track position.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:609850:100018:1> MoveTurntable'''
 +
 
 +
*'''Built-in Command''' by '''vandragonax'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<name of turntable>''''' - select the named turntable (see '''Notes''' below).
 +
  '''''<track #>'' or ''<relative track movement>''''' - select the track number (0 = 1st track) or a relative movement (prev, next)
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify all the turntables and the number of tracks they have.
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session Rule List with Parameters#InputTable Rule|InputTable Rule]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Priorityz'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Priorityz.png|50px|link=]]</td>
 +
<td>Sets the train priority value.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:66277:80003:1> priorityz'''
 +
 
 +
*'''Built-in Command''' by '''smileyman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''''<value>''''' - select train priority value 1, 2 or 3
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:The Priority value identifies the importance of the train for the '''Priority Trackmarkers'''. Usually (a guide only):-
 +
:*Priority 1 = Express trains
 +
:*Priority 2 = Local Expresses or Fast Freights
 +
:*Priority 3 = Slow Local Freights or All Stops Services
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How_to_Use_Track_Priority_Markers|How to Use Track Priority Markers]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Run Around'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_RunAround.png|50px|link=]]</td>
 +
<td>Uncouples the locomotive (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10083> Run Around'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#There must be a path for the locomotive to follow from one end of the train to the other.
 +
#The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Run Around Ex|Run Around Ex]]''' - performs the run around only if there is no loco already in position at the other end
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Run Around Ex'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_RunAroundEx.png|50px|link=]]</td>
 +
<td>Uncouples the locomotive(s) (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon but ONLY if the other end of the train does not already have a locomotive in place.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:117667:83:3> Run Around Ex'''
 +
 
 +
*'''DLS Command''' by '''nicroman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#There must be a path for the locomotive to follow from one end of the train to the other.
 +
#The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
 +
#There must be no locomotive already coupled to the destination end of the train.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Run Around|Run Around]]''' - unconditionally performs the run around
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Uncouplez'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Uncouplez.png|50px|link=]]</td>
 +
<td>Uncouples the locomotive (plus tender if present) from the train.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:66277:80000:1> UnCouplez'''
 +
 
 +
*'''Built-in Command''' by '''smileyman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#UncouplezFrom|UncouplezFrom]]''' - decouples a consist at a specific place. Upto 20 wagons
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''UncouplezFrom'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_Uncouplez.png|50px|link=]]</td>
 +
<td>Uncouples the train at the wagon specified.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:66277:80005:2> UnCouplezFrom'''
 +
 
 +
*'''Built-in Command''' by '''smileyman'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  '''''<number>''''' - select a wagon number (0-20) to decouple from.
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The first wagon '''after''' the locomotive (or the locomotive and tender) is #0, the second wagon is #1, etc.
 +
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 +
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark
 +
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 +
*'''[[#Decouple DLX|Decouple DLX]]''' - decouples a consist at a specific, or a random, place. Upto 99 wagons
 +
*'''[[#Decouple Head N|Decouple Head N]]''' - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
 +
*'''[[#Decouple Number #|Decouple Number #]]''' - decouples a consist at a specific place. Upto 40 wagons
 +
*'''[[#Uncouplez|Uncouplez]]''' - decouples the locomotive (or locomotive + tender) from a consist
 +
<br>
 +
<table bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
'''[[#top|Back to Top]]'''
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table width="100%" bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
 
 +
='''Navigation Commands'''=
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''AutoDrivePastSignal'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_AutoDrivePastSignal.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to drive under '''Autopilot''' until the entire train clears the specified signal but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed. The train will slow to a halt after passing the signal.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:61392:7101:1> AutoDrivePastSignal Command'''
 +
 
 +
*'''DLS Command''' by '''pguy'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
  Select '''''<signal name>''''' from Session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
*It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#AutoPilot|AutoPilot]]''' - drives continuously or until a specified trackmark has been passed
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Autopilot'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_AutoPilot.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to drive but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:71155:60001:5> Autopilot Command'''
 +
 
 +
*'''DLS Command''' by '''_mutton_'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select one of
 +
    '''<activate>''' - starts the Autopilot Command. This will only terminate when the '''Autopilot Command''' is removed from the driver command line
 +
    '''<stop at track mark>''' - select a trackmark from the session list. Starts the Autopilot Command and drives until the train reaches the selected trackmark (see '''Notes''' below)
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
 +
#If the '''Stop at track mark''' option is used then:-
 +
:*the train will not set a path to the track mark, that is the users responsibility
 +
:*the train will run at the full posted line speed upto the track mark and then it will slow to a stop
 +
:*if the track mark is never reached because the correct path has not been set, the train will continue as it would for the '''activate''' option
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#AutoDrivePastSignal|AutoDrivePastSignal]]''' - drives until a specified signal has been passed
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Drive To'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_IndustryIcon.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Drive, via the shortest available path, to the designated Industry (including Passenger Stations). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will '''NOT''' attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:11058> Drive To'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of industry>''' or industry enabled passenger station from the session list
 +
  if applicable '''<name/number of track or platform>''' for industries and stations that have identified active platforms, tracks or loading bays
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Navigate To|Navigate To]]''' - will seek alternative paths if blocked
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Drive To Trackmark'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_NavigateTo.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Drive, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will '''NOT''' attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:11149> Drive To Trackmark'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of trackmark>''' from the session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
 +
*'''[[#Navigate Via Trackmark|Navigate Via Trackmark]]''' - drives through trackmark, will seek alternative paths if blocked
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How to Use Track Markers]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Drive Via Trackmark'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_NavigateTo.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will '''NOT''' attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:11209> Drive Via Trackmark'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of trackmark>''' from the session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
 +
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the designated trackmark. This can lead to the train stopping and waiting indefinately until the blockage is removed.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
 +
*'''[[#Navigate Via Trackmark|Navigate Via Trackmark]]''' - drives through trackmark, will seek alternative paths if blocked
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How to Use Track Markers]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Navigate To'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_IndustryIcon.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Navigate, via the shortest available path, to the designated Industry (including Passenger Station). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10058> Navigate To'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of industry>''' or industry enabled passenger station from the session list
 +
  if applicable '''<name/number of track or platform>''' for industries and stations that have identified active platforms, tracks or loading bays
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Drive To|Drive To]]''' - does not seek alternative paths if blocked
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Navigate To Trackmark'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_NavigateTo.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Navigate, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10149> Navigate To Trackmark'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of trackmark>''' from the session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Navigate Via Trackmark|Navigate Via Trackmark]]''' - drives through trackmark, will seek alternative paths if blocked
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How to Use Track Markers]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Navigate Via Trackmark'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_NavigateTo.png|50px|link=]]</td>
 +
<td>Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:-3:10209> Navigate Via Trackmark'''
 +
 
 +
*'''Base Command'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
Select '''<name of trackmark>''' from the session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
 +
#If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the designated trackmark. This can lead to the train traveling backwards and down the wrong track.
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Drive To Trackmark|Drive To Trackmark]]''' - stops at trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Drive Via Trackmark|Drive Via Trackmark]]''' - drives through trackmark, will NOT seek alternative paths if blocked
 +
*'''[[#Navigate To Trackmark|Navigate To Trackmark]]''' - stops at trackmark, will seek alternative paths if blocked
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How to Use Track Markers]]'''
 +
 
 +
<br>
 +
<table bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
'''[[#top|Back to Top]]'''
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table width="100%" bgcolor=#a8ff8a>
 +
<tr>
 +
<td>
 +
 
 +
='''Session Management Commands'''=
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Copy Commands From'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_CopyCommandsFrom.png|50px|link=]]</td>
 +
<td>Copies a driver schedule from a schedule library or another driver.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:192081:1:7> Copy Commands From'''
 +
 
 +
*'''Built-in Command''' by '''brummfondel'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Append''' - '''From Library''' - select a saved schedule from Schedule Library and add it to the end of the current schedule (if any)
 +
'''Append''' - '''From Vehicle''' - select a vehicle, copy its driver commands and add them to the end of the current schedule (if any)
 +
'''Insert''' - '''From Library''' - select a saved schedule from Schedule Library and insert it into the current schedule (if any)
 +
'''Insert''' - '''From Vehicle''' - select a vehicle, copy its driver commands and insert them into the current schedule (if any)
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session_Rule_List_with_Parameters#Schedule Library Rule|Schedule Library Rule]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Delete Train'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_DeleteTrain.png|50px|link=]]</td>
 +
<td>Deletes the train from the session.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:116387:15:3> Delete Train'''
 +
 
 +
*'''Built-in Command''' by '''maggs'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''None'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Insert Buff Label'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_InsertBuffLabel.png|50px|link=]]</td>
 +
<td>Inserts a driver command as a label for a block of driver commands.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:160293:101002> Insert buff label'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Select ''<label number>''''' - select the label number (1 to 10)
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:Up to 10 labels can be inserted into each drivers command list
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
 +
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Jump to Label'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_JumpToLabel.png|50px|link=]]</td>
 +
<td>Unconditionally jumps to a named command label.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:160293:101003:2> Jump to label'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Select ''<label number>''''' - select the label number (1 to 20)
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
:A '''label''' ('''Insert Buff label''' driver command) with the matching label number must be added to the driver commands
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 +
*'''[[#Skip if Session-Variable|Skip if Session Variable]]''' - conditionally jumps to the named command label if a selected session variable meets a set condition
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Layer Control'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_LayerControl.png|50px|link=]]</td>
 +
<td>Shows or hides a selected layer.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid:160293:101080> Layer Control'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Show ''<list of layers in route and session>''''' - select a layer to make visible
 +
'''Hide ''<list of layers in route and session>''''' - select a layer to make invisible
 +
 
 +
[[file:PageLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Session Rules:</span>
 +
*'''[[Session_Rule_List_with_Parameters#Show.2FHide_Layer_Rule|Show/Hide Layer Rule]]'''
 +
 
 +
[[file:Ex.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Examples of Use:</span>
 +
*'''[[How_to_Use_Layers#Layers_in_Driver_Mode|Layers in Driver Mode]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Move to Train'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_MoveToTrain.png|50px|link=]]</td>
 +
<td>Moves the driver with all their remaining driver commands to another train.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:71155:60004:2> Move to train'''
 +
 
 +
*'''DLS Command''' by '''_mutton_'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''All trains ''<list of locomotives>''''' - select a locomotive from the Session list
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The new train must not already have a driver - make sure that the '''Generate New Drivers for Empty Trains''' option in the '''Driver Setup Rule''' is not ticked.
 +
#If the new train does already have a driver then the command and any following commands will not be executed.
 +
 
 +
[[file:WikiLink.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Trainz Wiki Links:</span>
 +
*'''[[How_to_Use_Driver_Setup_Rule|How to Use the Driver Setup Rule]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
=='''Set Custom HUD (SP2 and later)'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_SetCustomHUD.png|50px|link=]]</td>
 +
<td>Sets a predefined HUD on the screen.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:61392:7006:37> SetCustomHud (SP2 and later)'''
 +
 
 +
*'''DLS Command''' by '''pguy'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''''<defHud>''''' - select the default HUD
 +
'''''<altHud>''''' - select the alternate HUD
 +
'''''<named Hud>''''' - select from a number of user defined HUDs
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#the '''Quick CustomHud Manager Rule (SP2 and later)''' must be added to a session for a HUD to be selected by this command
 +
#the default and alternate HUDs are preset but can be edited using the above rule
 +
#additional user defined and named HUDs can be created with the '''Quick CustomHud Manager Rule (SP2 and later)'''
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session_Rule_List_with_Parameters#Quick_CustomHud_Manager_Rule_(SP2_and_later)|Quick CustomHud Manager Rule (SP2 and later)]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Skip if Session-Variable'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_SkipIfSVar.png|50px|link=]]</td>
 +
<td>Jumps to the named command label if a selected session variable meets a set condition.</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:160293:101014:3> Skip if session-variable'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Select ''<label number if>''''' - select the label number (1 to 20)
 +
    '''''<Variable Name>''''' - from the '''InputTable Rule'''
 +
      '''''<condition>''''' - from the '''InputTable Rule'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
#The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 +
#A '''label''' ('''Insert Buff Label''' driver command) with the matching label number must be added to the driver commands
 +
 
 +
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
 +
 
 +
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 +
*'''[[#Insert Buff Label|Insert Buff Label]]''' - inserts a driver command as a label for a block of driver commands
 +
*'''[[#Jump to Label|Jump to Label]]''' - unconditionally jumps to a named command label
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session Rule List with Parameters#InputTable Rule|InputTable Rule]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''Wait Until S-Variable V3'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_WaitSVariable.png|50px|link=]]</td>
 +
<td>The AI driver will wait until the identified variable matches the condition specified before the next command will be executed</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:160293:101006:3> Wait Until S-variable V3'''
 +
 
 +
*'''DLS Command''' by '''trev999'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Select ''<Variable Name>''''' - select the variable name from those entered in the '''InputTable Rule'''
 +
    '''Select <Condition><Value>''''' - select from those entered in the '''InputTable Rule'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 +
 
 +
[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
 +
 
 +
[[file:PageLink3.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Required Session Rules:</span><br>
 +
:'''Rules that MUST be added to the Session for this Driver Command to operate'''
 +
*'''[[Session Rule List with Parameters#InputTable Rule|InputTable Rule]]'''
 +
 
 +
<br>
 +
<table width=100% bgcolor=#d7ffc9>
 +
<tr>
 +
<td>
 +
 
 +
=='''WaitUntilSVariable'''==
 +
</td>
 +
</tr>
 +
</table>
 +
 
 +
<table>
 +
<tr valign="top">
 +
<td>[[file:CMD_WaitSVar.png|50px|link=]]</td>
 +
<td>The AI driver will wait until the identified variable matches the condition specified before the next command will be executed</td>
 +
</tr>
 +
</table>
 +
 
 +
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
 +
 
 +
*'''<kuid2:131986:1006:1> WaitUntilSVariable'''
 +
 
 +
*'''DLS Command''' by '''atilabarut'''
 +
 
 +
*'''Legacy Command''' has been replaced by '''Wait Until S-Variable'''
 +
 
 +
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
 +
 
 +
'''Select ''<Variable Name><Condition><Value>''''' - from the '''InputTable Rule'''
 +
 
 +
[[file:Notes.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Notes:</span>
 +
*The '''InputTable Rule''' must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
 +
 
 +
[[[file:Issues.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Known Issues:</span>
 +
*TANE Sessions containing driver commands that use variables ''may not'' work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19
 +
 
 +
[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Wait Until S-Variable V3|Wait Until S-Variable V3]]''' - AI driver waits for specified variable condition
 
*'''[[#Wait Until S-Variable V3|Wait Until S-Variable V3]]''' - AI driver waits for specified variable condition
  
Line 1,596: Line 2,865:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:66277:80002:1> bellz'''
 
*'''<kuid2:66277:80002:1> bellz'''
Line 1,602: Line 2,871:
 
*'''Built-in Command''' by '''smileyman'''
 
*'''Built-in Command''' by '''smileyman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 1,609: Line 2,878:
 
:the locomotive must be equipped with a working bell.
 
:the locomotive must be equipped with a working bell.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Hornz|Hornz]]''' - gives a blast of the horn (or whistle)
 
*'''[[#Hornz|Hornz]]''' - gives a blast of the horn (or whistle)
 
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
 
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
Line 1,629: Line 2,898:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10081> Couple'''
 
*'''<kuid:-3:10081> Couple'''
Line 1,635: Line 2,904:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<list of available wagons>''''' - select a wagon to couple to
 
   '''''<list of available wagons>''''' - select a wagon to couple to
Line 1,643: Line 2,912:
 
#There must be a clear path to the target wagon.
 
#There must be a clear path to the target wagon.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
Line 1,668: Line 2,937:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:2:57145:81100:1> Couple At Trackmark'''
 
*'''<kuid:2:57145:81100:1> Couple At Trackmark'''
Line 1,674: Line 2,943:
 
*'''DLS Command''' by '''marzipan'''
 
*'''DLS Command''' by '''marzipan'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<list of available trackmarks>''''' - select a trackmark
 
   '''''<list of available trackmarks>''''' - select a trackmark
Line 1,683: Line 2,952:
 
#There must be a clear path to the target wagon.
 
#There must be a clear path to the target wagon.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
 
*'''[[#Decouple|Decouple]]''' - decouples a consist at a specific place (does not work in the '''Driver Setup Rule''')
Line 1,712: Line 2,981:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10082> Decouple'''
 
*'''<kuid:-3:10082> Decouple'''
Line 1,718: Line 2,987:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<list of available wagons>''''' - select a wagon to decouple from
 
   '''''<list of available wagons>''''' - select a wagon to decouple from
Line 1,729: Line 2,998:
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
Line 1,754: Line 3,023:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:160293:100120:2> Decouple DLX'''
 
*'''<kuid2:160293:100120:2> Decouple DLX'''
Line 1,760: Line 3,029:
 
*'''DLS Command''' by '''trev999'''
 
*'''DLS Command''' by '''trev999'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''When Used in Surveyor using the Driver Setup Rule'''
 
   '''When Used in Surveyor using the Driver Setup Rule'''
Line 1,783: Line 3,052:
 
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
Line 1,808: Line 3,077:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:46162:70002:12> Decouple Head N'''
 
*'''<kuid2:46162:70002:12> Decouple Head N'''
Line 1,814: Line 3,083:
 
*'''DLS Command''' by '''josefpav'''
 
*'''DLS Command''' by '''josefpav'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''<select wagon number>''' - select the number of wagons (sorted by ASCII code not numerical value) to be left in the consist after the decoupling.  
 
   '''<select wagon number>''' - select the number of wagons (sorted by ASCII code not numerical value) to be left in the consist after the decoupling.  
Line 1,822: Line 3,091:
 
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 
:The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
Line 1,847: Line 3,116:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:147570:80008:1> Decouple number #'''
 
*'''<kuid2:147570:80008:1> Decouple number #'''
Line 1,853: Line 3,122:
 
*'''Built-in Command''' by '''erniesouchak'''
 
*'''Built-in Command''' by '''erniesouchak'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<number>''''' - select a wagon number (1-40) to decouple from.
 
   '''''<number>''''' - select a wagon number (1-40) to decouple from.
Line 1,861: Line 3,130:
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
Line 1,886: Line 3,155:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:66277:80001:2> Hornz'''
 
*'''<kuid2:66277:80001:2> Hornz'''
Line 1,892: Line 3,161:
 
*'''Built-in Command''' by '''smileyman'''
 
*'''Built-in Command''' by '''smileyman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
 
*'''[[#HornzExtended|HornzExtended]]''' - gives a specified number of horn blasts
Line 1,916: Line 3,185:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:478639:100034> HornzExtended'''
 
*'''<kuid:478639:100034> HornzExtended'''
Line 1,922: Line 3,191:
 
*'''Built-in Command''' by '''ffccnn'''
 
*'''Built-in Command''' by '''ffccnn'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  Select one of '''''<Play once>'''''
 
  Select one of '''''<Play once>'''''
Line 1,932: Line 3,201:
 
:When the command is executed, the AI will immediately move onto the next command in the sequence and will blast the horn during the execution of the following driver commands until the set count has been reached
 
:When the command is executed, the AI will immediately move onto the next command in the sequence and will blast the horn during the execution of the following driver commands until the set count has been reached
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 
*'''[[#Bellz|Bellz]]''' - rings the locomotive bell (if it has one)
 
*'''[[#Hornz|Hornz]]''' - gives one blast of the horn or whistle
 
*'''[[#Hornz|Hornz]]''' - gives one blast of the horn or whistle
Line 1,952: Line 3,221:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:609850:100018:1> MoveTurntable'''
 
*'''<kuid2:609850:100018:1> MoveTurntable'''
Line 1,958: Line 3,227:
 
*'''Built-in Command''' by '''vandragonax'''
 
*'''Built-in Command''' by '''vandragonax'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<name of turntable>''''' - select the named turntable (see '''Notes''' below).
 
   '''''<name of turntable>''''' - select the named turntable (see '''Notes''' below).
Line 1,986: Line 3,255:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:66277:80003:1> priorityz'''
 
*'''<kuid2:66277:80003:1> priorityz'''
Line 1,992: Line 3,261:
 
*'''Built-in Command''' by '''smileyman'''
 
*'''Built-in Command''' by '''smileyman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''''<value>''''' - select train priority value 1, 2 or 3
 
  '''''<value>''''' - select train priority value 1, 2 or 3
Line 2,021: Line 3,290:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid:-3:10083> Run Around'''
 
*'''<kuid:-3:10083> Run Around'''
Line 2,027: Line 3,296:
 
*'''Base Command'''
 
*'''Base Command'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 2,035: Line 3,304:
 
#The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
 
#The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Run Around Ex|Run Around Ex]]''' - performs the run around only if there is no loco already in position at the other end
 
*'''[[#Run Around Ex|Run Around Ex]]''' - performs the run around only if there is no loco already in position at the other end
  
Line 2,054: Line 3,323:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:117667:83:3> Run Around Ex'''
 
*'''<kuid2:117667:83:3> Run Around Ex'''
Line 2,060: Line 3,329:
 
*'''DLS Command''' by '''nicroman'''
 
*'''DLS Command''' by '''nicroman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
Line 2,069: Line 3,338:
 
#There must be no locomotive already coupled to the destination end of the train.
 
#There must be no locomotive already coupled to the destination end of the train.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Run Around|Run Around]]''' - unconditionally performs the run around
 
*'''[[#Run Around|Run Around]]''' - unconditionally performs the run around
  
Line 2,088: Line 3,357:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:66277:80000:1> UnCouplez'''
 
*'''<kuid2:66277:80000:1> UnCouplez'''
Line 2,094: Line 3,363:
 
*'''Built-in Command''' by '''smileyman'''
 
*'''Built-in Command''' by '''smileyman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
  '''None'''
 
  '''None'''
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
Line 2,123: Line 3,392:
 
</table>
 
</table>
  
[[file:Properties.PNG|link=]] '''<u>Command Properties:</u>'''
+
[[file:Properties.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Properties:</span>
  
 
*'''<kuid2:66277:80005:2> UnCouplezFrom'''
 
*'''<kuid2:66277:80005:2> UnCouplezFrom'''
Line 2,129: Line 3,398:
 
*'''Built-in Command''' by '''smileyman'''
 
*'''Built-in Command''' by '''smileyman'''
  
[[file:Settings.PNG|link=]] '''<u>Command Settings:</u>'''
+
[[file:Settings.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Command Settings:</span>
  
 
   '''''<number>''''' - select a wagon number (0-20) to decouple from.
 
   '''''<number>''''' - select a wagon number (0-20) to decouple from.
Line 2,137: Line 3,406:
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
 
#The main problem with using decoupling commands in the '''Driver Setup Rule''' is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.
  
[[file:PageLink2.PNG|link=]] '''<u>Related Commands:</u>'''
+
[[file:PageLink2.PNG|link=]] <span style="text-decoration: underline; font-weight: 700;">Related Commands:</span>
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple|Couple]]''' - couples wagons in a consist
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  
 
*'''[[#Couple At Trackmark|Couple At Trackmark]]''' - couples to the wagon closest to a specified trackmark  

Revision as of 08:39, 22 October 2019

Train Railroad Simulator 2019 (TRS19) and TRAINZ A New Era (TANE) SP3. List of Trainz Driver Commands. All commands are the Copyright of N3V Games

This page is always under construction. As new driver commands appear and are tested they will be added to this list. Current Command Count: 57

Only driver commands supplied with TRS19/TANE or on the DLS are covered in this document.

The driver commands listed in this page are all found in Trainz Surveyor from the Edit Session option in the Main Menu and are accessed by the WikiLink.PNG Driver Command Rule and the WikiLink.PNG Driver Setup Rule.

See the Trainz Wiki Page WikiLink.PNG How to Use the Driver Setup Rule for more information on both rules.

Those commands that are identified as a DLS Command must be downloaded and installed from the Trainz DLS first.

Description Key:

  • <kuid number> is for the command version at the time of writing. This number will change if the command is updated.
  • DLS Command must be downloaded and installed from the DLS.
  • Base Command and Built-in Command are installed with TRS19/TANE.
  • Obsolete Command is no longer required (explanation given).
  • Legacy Command has been replaced by another command (new command will be identified).
  • SP2 and later means TANE SP2 and later versions including TRS19.

Contents

Interlocking Tower and Mission Code Commands


AddMissionCode (SP2 and Later)

CMD AddMissionCode.PNG Adds a mission code (a sequence of IT or EIT paths) to any mission codes already loaded for the train. The mission code must be set by the Mission Code Manager Rule (SP2 and Later)

Properties.PNG Command Properties:

  • <kuid2:61392:8203:56> AddMissionCode (SP2 and later)
  • DLS Command by pguy

Settings.PNG Command Settings:

  <mission codes> - select a mission code from the Session list

Notes.PNG Notes:

The mission code must be created by the Mission Code Manager Rule (SP2 and Later) using paths created with Interlocking Towers

PageLink2.PNG Related Commands:

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


IT CancelEnhancedPath

CMD ITCancelEnhancedPath.png Cancels an active Enhanced Interlocking Tower (EIT) path for the train that had been set by the IT SetPath Command

Properties.PNG Command Properties:

  • <kuid2:61392:8114:54> IT CancelEnhancedPath
  • DLS Command by pguy

Settings.PNG Command Settings:

  <Select EIT> - select from list of session EITs
     <Select Path> - select the active path from that EIT

Notes.PNG Notes:

  1. The active path must be created using Enhanced Interlocking Towers
  2. Cancelling a path makes it available for other consists and allows conflicting paths to be made active
  3. An active path is automatically cancelled after it has been completed by a train

PageLink2.PNG Related Commands:


IT SetPath

CMD ITSetPath.png Selects and sets a path for the train from those available from Interlocking Towers (ITs) and Enhanced Interlocking Towers (EITs). If this path was created by an EIT it can be cancelled prior to its use by the IT CancelEnhancedPath Command

Properties.PNG Command Properties:

  • <kuid2:61392:8111:54> IT SetPath
  • DLS Command by pguy

Settings.PNG Command Settings:

  <Select IT or EIT> - select from list of session ITs and/or EITs
     <Select Path> - select from available paths for that IT/EIT

Notes.PNG Notes:

  1. The paths must be created using Interlocking Towers
  2. An active path is automatically cancelled after it has been completed by a train

PageLink2.PNG Related Commands:


IT SetPathAndWaitActive

CMD ITSetPath.png Selects and sets a path for the train from those available from Interlocking Towers (ITs) and Enhanced Interlocking Towers (EITs) and waits until the path becomes active. If this path was created by an EIT it can be cancelled prior to its use by the IT CancelEnhancedPath Command

Properties.PNG Command Properties:

  • <kuid2:61392:8113:54> IT SetPathAndWaitActive
  • DLS Command by pguy

Settings.PNG Command Settings:

  <Select IT or EIT> - select from list of session ITs and/or EITs
     <Select Path> - select from available paths for that IT/EIT

Notes.PNG Notes:

  1. The paths must be created using Interlocking Towers
  2. An active path is automatically cancelled after it has been completed by a train

PageLink2.PNG Related Commands:


IT SetPathAndWaitNotRed

CMD ITSetPath.png Selects and sets a path for the train from those available from Interlocking Towers (ITs) and Enhanced Interlocking Towers (EITs) and waits until the next signal is not showing red. If this path was created by an EIT it can be cancelled prior to its use by the IT CancelEnhancedPath Command

Properties.PNG Command Properties:

  • <kuid2:61392:8112:54> IT SetPathAndWaitNotRed
  • DLS Command by pguy

Settings.PNG Command Settings:

  <Select IT or EIT> - select from list of session ITs and/or EITs
     <Select Path> - select from available paths for that IT/EIT

Notes.PNG Notes:

  1. The paths must be created using Interlocking Towers
  2. An active path is automatically cancelled after it has been completed by a train

PageLink2.PNG Related Commands:


RemoveMissionCode (SP2 and Later)

CMD RemoveMissionCode.PNG Removes a mission code (a sequence of IT or EIT paths) from any mission codes already loaded for the train. The mission code must be set by the Mission Code Manager Rule (SP2 and Later) and given to the driver by the SetMissionCode (SP2 and later) or AddMissionCode (SP2 and Later) driver commands or by the Mission Code Manager Rule (SP2 and Later) itself

Properties.PNG Command Properties:

  • <kuid2:61392:8204:56> RemoveMissionCode (SP2 and later)
  • DLS Command by pguy

Settings.PNG Command Settings:

  <mission codes> - select a mission code from the Session list

Notes.PNG Notes:

The mission code must be created by the Mission Code Manager Rule (SP2 and Later) using paths created with Interlocking Towers

PageLink2.PNG Related Commands:

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


SetMissionCode (SP2 and Later)

CMD SetMissionCode.PNG Sets a mission code (a sequence of IT or EIT paths) for the train. The mission code must be set by the Mission Code Manager Rule (SP2 and Later). Mission codes can also be given to trains in Surveyor or Driver mode through the Mission Code Manager Rule (SP2 and Later)

Properties.PNG Command Properties:

  • <kuid2:61392:8201:56> SetMissionCode (SP2 and later)
  • DLS Command by pguy

Settings.PNG Command Settings:

  <*Reset mission code> - resets the currently loaded mission code, or
  <mission codes> - select a mission code from the Session list

Notes.PNG Notes:

The mission code must be created by the Mission Code Manager Rule (SP2 and Later) using paths created with Interlocking Towers

PageLink2.PNG Related Commands:

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Back to Top

Junction and Signal Commands


ControlJunction

CMD ControlJunction.png Sets the direction for a single specified junction switch.

Properties.PNG Command Properties:

  • <kuid:131986:1011> ControlJunction
  • DLS Command by atilabarut

Settings.PNG Command Settings:

  Select switch direction, one of <LEFT/RIGHT/FORWARD>
     Select <switch name> from the session list

PageLink2.PNG Related Commands:

  • SetOneJunction - sets the direction for a single specified junction switch


SetOneJunction

CMD SetOneJunction.png Sets the direction for a single specified junction switch.

Properties.PNG Command Properties:

  • <kuid:121843:100445> SetOneJunction
  • DLS Command by pitkin

Settings.PNG Command Settings:

  Select <switch name> from the session list
     Select switch direction, one of <LEFT/RIGHT/FORWARD/BACKWARD>

PageLink2.PNG Related Commands:

  • ControlJunction - sets the direction for a single specified junction switch


Set Signal Ahead

CMD SignalAhead.png Sets the state of the next signal ahead.

Properties.PNG Command Properties:

  • <kuid2:368725:60003:6> Set Signal Ahead
  • DLS Command by elstoko

Settings.PNG Command Settings:

  <Set next signal to> - select one from
     <Stop>
     <Caution Straight>
     <Caution Left>
     <Caution Right>
     <Proceed Straight>
     <Proceed Left>
     <Proceed Right>
     <Advance Caution>
     <Call on 1 (State 9)>
     <Call on 2 (State 10)>
     <Automatic>

Notes.PNG Notes:

  1. This command only works on signals that will respond to the function "SetSignalStateEx", not all signals will respond
  2. The signal must support the selected state otherwise there will be no change
  3. The signal will be reset after the train has cleared the signal


Back to Top

Load and Unload Commands


Instant Load

CMD InstantLoad.png Instantly loads all rolling stock (except locos and tenders) in the train with the item(s) in their commodity queues.

Properties.PNG Command Properties:

  • <kuid2:45324:555017:7> Instant Load Command
  • DLS Command by norfolksouthern37

Settings.PNG Command Settings:

None


InstantLoadLocos

CMD InstantLoadLocos.png Instantly loads all locos and tenders in the train with the item(s) in their commodity queues (coal, water, diesel fuel).

Properties.PNG Command Properties:

  • <kuid2:117290:1022:1> InstantLoadLocos
  • Built-in Command by nzhorse

Settings.PNG Command Settings:

None


InstantUnLoad

CMD InstantUnLoad.png Instantly unloads the commodities in all rolling stock (except locos and tenders) in the train.

Properties.PNG Command Properties:

  • <kuid2:67585:1021:2> InstantUnload
  • DLS Command by robin_hoods

Settings.PNG Command Settings:

None


Load

CMD Load.png Instructs the AI driver to load the commodity or commodities waiting at an industry enabled asset into the rolling stock assets that have been configured to receive them. This may involve the AI driver moving the train forward a few wagons at a time until the entire length of the train has passed through the loading area. The Load command is also used for loading (and unloading) passengers at passenger enabled stations.

Properties.PNG Command Properties:

  • <kuid:-3:10076> Load
  • Base Command

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. If the industry where the loading is taking place uses up all the available commodities before all the wagons are fully loaded, then any following wagons will not be loaded until the commodity is available again but the AI driver will not stop to wait.
  2. With passenger enabled stations the Load command will first execute an Unload command to unload some of the passengers.


Load At

CMD IndustryIcon.png Combines the Drive To and Load commands. Instructs the AI driver to drive to an industry (or passenger enabled station) and load the commodity or commodities waiting there into the rolling stock assets that have been configured to receive them. This may involve the AI driver moving the train forward a few wagons at a time until the entire length of the train has passed through the loading area. The Load At command is also used for loading (and unloading) passengers at passenger enabled stations. All signals and speed signs are obeyed during the "Drive To" operation.

Properties.PNG Command Properties:

  • <kuid2:75377:84:1> Load At
  • DLS Command by stagecoach

Settings.PNG Command Settings:

Select <name of industry> or industry enabled passenger station from the session list
  if applicable <name/number of track or platform> for industries and stations that have identified active platforms, tracks or loading bays

Notes.PNG Notes:

  1. The AI driver will select the shortest available path to the destination.
  2. If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.
  3. If the industry where the loading is taking place uses up all the available commodities before all the wagons are fully loaded, then any following wagons will not be loaded until the commodity is available again but the AI driver will not stop to wait.
  4. With passenger enabled stations the Load command will first execute an Unload command to unload some of the passengers.

PageLink2.PNG Related Commands:

  • Drive To - drives to an industry but does not seek alternative paths if blocked
  • Load - loads commodities at an industry (including a station)


Terminate Passenger Train

CMD TerminateTrain.png An Unload command for passenger trains arriving at a terminal station. The train will be emptied of passengers.

Properties.PNG Command Properties:

  • <kuid2:116387:16:2> Terminate Passenger Train
  • Built-in Command by maggs

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. Issue a Drive To command (or similar) to the station before using this command. The station must be industry active.


Unload

CMD Unload.png Instructs the AI driver to unload the commodity or commodities loaded in rolling stock assets to the industry enabled asset if it has been configured and is able to receive them. This may involve the AI driver moving the train forward a few wagons at a time until the entire length of the train has passed through the loading area. The Unload command is also used for unloading passengers at passenger enabled stations.

Properties.PNG Command Properties:

  • <kuid:-3:10077> Unload
  • Base Command

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. If the industry where the unloading is taking place reaches its maximum capacity before all the wagons are fully unloaded, then any following wagons will not be unloaded until capacity is available again but the AI driver will not stop to wait.
  2. With passenger enabled stations the Unload command will unload a set number of passengers, specifically:-
  • Terminal stations = 100% of loaded passengers
  • Large stations = 50%
  • Standard stations = 25%
  • Small stations = 10%
The station size is set in the station properties


Back to Top

Movement Commands


AI Wait Until Green Signal

CMD WaitUntilGreen.png Instructs the AI driver to wait for a green signal ahead before executing the next driver command. The interface for this driver command is in Russian.

Properties.PNG Command Properties:

  • <kuid2:151055:100101:3> AI Wait until green signal
  • DLS Command by erendir

Settings.PNG Command Settings:

  Ждать, пока не будет зелёный > - Translation: "Wait until it is green >" 
     На любом светофоре - Translation: "At any traffic light" - select for the next signal up to 3000m ahead
     Только на станционном зале " Z7 " /Су - Translation: "Only at the station hall " Z7 " / su" - unknown meaning


Change Train Direction

CMD ChangeDirection.png Reverses the driving direction of the train.

Properties.PNG Command Properties:

  • <kuid2:70791:9001:1> Change Train Direction
  • Built-in Command by mgalling

Settings.PNG Command Settings:

None


Halt Train

CMD HaltTrain.png Brings the train to an immediate stop.

Properties.PNG Command Properties:

  • <kuid:401543:1090> Halt Train
  • Base Command

Settings.PNG Command Settings:

None


Set Max Speed To

CMD MaxSpeed.png Instructs the AI driver to drive up to the set maximum speed (mph). This speed limit has no effect on other AI trains. Lower speed limit signs are obeyed.

Properties.PNG Command Properties:

  • <kuid2:450022:90001:2> Set Max Speed To
  • DLS Command by nikkia

Settings.PNG Command Settings:

Select <No maximum speed> or <value> in mph

Notes.PNG Notes:

The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another Set Max Speed To command.

PageLink2.PNG Related Commands:


Set Max Speed To (km/h)

CMD MaxSpeed.png Instructs the AI driver to drive up to the set maximum speed (km/h). This speed limit has no effect on other AI trains. Lower speed limit signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:450022:90002> Set Max Speed To (km/h)
  • DLS Command by nikkia

Settings.PNG Command Settings:

Select <No maximum speed> or <value> in km/h

Notes.PNG Notes:

The maximum speed, once set, will remain in place throughout the session unless cancelled or reset by another Set Max Speed To command.

PageLink2.PNG Related Commands:


WaitFor

CMD WaitFor.png Instructs the AI driver to wait for a set time period before executing the next instruction in the command list.

Properties.PNG Command Properties:

  • <kuid:-3:10090> WaitFor
  • Base Command

Settings.PNG Command Settings:

Select <time delay> from list

Notes.PNG Notes:

There are a limited range of available times from 5 seconds to 1 hour. A time delay that is not in this list (e.g. 3 minutes) can be achieved by using two (or more) WaitFor commands with the combined total of their times equaling the required time delay.


PageLink2.PNG Related Commands:


WaitForTrigger

CMD WaitForTrigger.png Instructs the AI driver to wait for a trigger event before executing the next instruction in the command list. The train triggering the event can be any train in the session.

Properties.PNG Command Properties:

  • <kuid2:57344:80001:5> WaitFor
  • Built-in Command by marinus

Settings.PNG Command Settings:

Select <trigger name> from the session list
   Select <any train> or locomotive from <list of locomotive names>

Issues.PNG Known Issues:

  • The presence of a large number of locos in a session can cause this command to fail due to a timeout error

Notes.PNG Notes:

  • Command will not appear in a drivers command list if there are no triggers set


Wait Until II

CMD WaitUntilII.png Instructs the AI driver to wait until the specified time

Properties.PNG Command Properties:

  • <kuid:32711:100025> Wait Until II
  • Built-in Command by dap

Settings.PNG Command Settings:

Select <hours> 1 to 24
   Select <minutesx10> minutes 0 to 50 in increments of 10
      Select <minutesx1> minutes 0 to 9

Notes.PNG Notes:

  • If the driver is running up to 4 hours late this command will terminate immediately
  • If the wait until time is more than 4 hours behind the game time, the command will wait until tomorrow
  • The game time rate must be set to x1 (normal speed) for the command to work correctly
  • Run-time editing is not available for this command. To edit in Driver the command must be removed first

PageLink2.PNG Related Commands:

  • WaitFor - sets the wait period for up to 1 hour


Back to Top

Navigation Commands


AutoDrivePastSignal

CMD AutoDrivePastSignal.png Instructs the AI driver to drive under Autopilot until the entire train clears the specified signal but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed. The train will slow to a halt after passing the signal.

Properties.PNG Command Properties:

  • <kuid2:61392:7101:1> AutoDrivePastSignal Command
  • DLS Command by pguy

Settings.PNG Command Settings:

  Select <signal name> from Session list

Notes.PNG Notes:

  • It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches

PageLink2.PNG Related Commands:

  • AutoPilot - drives continuously or until a specified trackmark has been passed


Autopilot

CMD AutoPilot.png Instructs the AI driver to drive but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid2:71155:60001:5> Autopilot Command
  • DLS Command by _mutton_

Settings.PNG Command Settings:

Select one of
   <activate> - starts the Autopilot Command. This will only terminate when the Autopilot Command is removed from the driver command line
   <stop at track mark> - select a trackmark from the session list. Starts the Autopilot Command and drives until the train reaches the selected trackmark (see Notes below)

Notes.PNG Notes:

  1. It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
  2. If the Stop at track mark option is used then:-
  • the train will not set a path to the track mark, that is the users responsibility
  • the train will run at the full posted line speed upto the track mark and then it will slow to a stop
  • if the track mark is never reached because the correct path has not been set, the train will continue as it would for the activate option

PageLink2.PNG Related Commands:


Drive To

CMD IndustryIcon.png Instructs the AI driver to Drive, via the shortest available path, to the designated Industry (including Passenger Stations). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11058> Drive To
  • Base Command

Settings.PNG Command Settings:

Select <name of industry> or industry enabled passenger station from the session list
  if applicable <name/number of track or platform> for industries and stations that have identified active platforms, tracks or loading bays

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:


Drive To Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11149> Drive To Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Drive Via Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11209> Drive Via Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

  1. This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
  2. If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the designated trackmark. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Navigate To

CMD IndustryIcon.png Instructs the AI driver to Navigate, via the shortest available path, to the designated Industry (including Passenger Station). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10058> Navigate To
  • Base Command

Settings.PNG Command Settings:

Select <name of industry> or industry enabled passenger station from the session list
  if applicable <name/number of track or platform> for industries and stations that have identified active platforms, tracks or loading bays

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

  • Drive To - does not seek alternative paths if blocked


Navigate To Trackmark

CMD NavigateTo.png Instructs the AI driver to Navigate, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10149> Navigate To Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Navigate Via Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10209> Navigate Via Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

  1. This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
  2. If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the designated trackmark. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Back to Top

Session Management Commands


Copy Commands From

CMD CopyCommandsFrom.png Copies a driver schedule from a schedule library or another driver.

Properties.PNG Command Properties:

  • <kuid2:192081:1:7> Copy Commands From
  • Built-in Command by brummfondel

Settings.PNG Command Settings:

Append - From Library - select a saved schedule from Schedule Library and add it to the end of the current schedule (if any)
Append - From Vehicle - select a vehicle, copy its driver commands and add them to the end of the current schedule (if any)
Insert - From Library - select a saved schedule from Schedule Library and insert it into the current schedule (if any)
Insert - From Vehicle - select a vehicle, copy its driver commands and insert them into the current schedule (if any)

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Delete Train

CMD DeleteTrain.png Deletes the train from the session.

Properties.PNG Command Properties:

  • <kuid2:116387:15:3> Delete Train
  • Built-in Command by maggs

Settings.PNG Command Settings:

None


Insert Buff Label

CMD InsertBuffLabel.png Inserts a driver command as a label for a block of driver commands.

Properties.PNG Command Properties:

  • <kuid:160293:101002> Insert buff label
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number> - select the label number (1 to 10)

Notes.PNG Notes:

Up to 10 labels can be inserted into each drivers command list

PageLink2.PNG Related Commands:

  • Jump to Label - unconditionally jumps to a named command label
  • Skip if Session Variable - conditionally jumps to the named command label if a selected session variable meets a set condition


Jump to Label

CMD JumpToLabel.png Unconditionally jumps to a named command label.

Properties.PNG Command Properties:

  • <kuid2:160293:101003:2> Jump to label
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number> - select the label number (1 to 20)

Notes.PNG Notes:

A label (Insert Buff label driver command) with the matching label number must be added to the driver commands

PageLink2.PNG Related Commands:

  • Insert Buff Label - inserts a driver command as a label for a block of driver commands
  • Skip if Session Variable - conditionally jumps to the named command label if a selected session variable meets a set condition


Layer Control

CMD LayerControl.png Shows or hides a selected layer.

Properties.PNG Command Properties:

  • <kuid:160293:101080> Layer Control
  • DLS Command by trev999

Settings.PNG Command Settings:

Show <list of layers in route and session> - select a layer to make visible
Hide <list of layers in route and session> - select a layer to make invisible

PageLink.PNG Related Session Rules:

Ex.PNG Examples of Use:


Move to Train

CMD MoveToTrain.png Moves the driver with all their remaining driver commands to another train.

Properties.PNG Command Properties:

  • <kuid2:71155:60004:2> Move to train
  • DLS Command by _mutton_

Settings.PNG Command Settings:

All trains <list of locomotives> - select a locomotive from the Session list

Notes.PNG Notes:

  1. The new train must not already have a driver - make sure that the Generate New Drivers for Empty Trains option in the Driver Setup Rule is not ticked.
  2. If the new train does already have a driver then the command and any following commands will not be executed.

WikiLink.PNG Trainz Wiki Links:


Set Custom HUD (SP2 and later)

CMD SetCustomHUD.png Sets a predefined HUD on the screen.

Properties.PNG Command Properties:

  • <kuid2:61392:7006:37> SetCustomHud (SP2 and later)
  • DLS Command by pguy

Settings.PNG Command Settings:

<defHud> - select the default HUD
<altHud> - select the alternate HUD
<named Hud> - select from a number of user defined HUDs

Notes.PNG Notes:

  1. the Quick CustomHud Manager Rule (SP2 and later) must be added to a session for a HUD to be selected by this command
  2. the default and alternate HUDs are preset but can be edited using the above rule
  3. additional user defined and named HUDs can be created with the Quick CustomHud Manager Rule (SP2 and later)

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Skip if Session-Variable

CMD SkipIfSVar.png Jumps to the named command label if a selected session variable meets a set condition.

Properties.PNG Command Properties:

  • <kuid2:160293:101014:3> Skip if session-variable
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number if> - select the label number (1 to 20)
   <Variable Name> - from the InputTable Rule
      <condition> - from the InputTable Rule

Notes.PNG Notes:

  1. The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
  2. A label (Insert Buff Label driver command) with the matching label number must be added to the driver commands

Issues.PNG Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

PageLink2.PNG Related Commands:

  • Insert Buff Label - inserts a driver command as a label for a block of driver commands
  • Jump to Label - unconditionally jumps to a named command label

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Wait Until S-Variable V3

CMD WaitSVariable.png The AI driver will wait until the identified variable matches the condition specified before the next command will be executed

Properties.PNG Command Properties:

  • <kuid2:160293:101006:3> Wait Until S-variable V3
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <Variable Name> - select the variable name from those entered in the InputTable Rule
   Select <Condition><Value> - select from those entered in the InputTable Rule

Notes.PNG Notes:

  • The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).

Issues.PNG Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


WaitUntilSVariable

CMD WaitSVar.png The AI driver will wait until the identified variable matches the condition specified before the next command will be executed

Properties.PNG Command Properties:

  • <kuid2:131986:1006:1> WaitUntilSVariable
  • DLS Command by atilabarut
  • Legacy Command has been replaced by Wait Until S-Variable

Settings.PNG Command Settings:

Select <Variable Name><Condition><Value> - from the InputTable Rule

Notes.PNG Notes:

  • The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).

Issues.PNG Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

PageLink2.PNG Related Commands:

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Back to Top

Train Operation Commands


Bellz

CMD Bellz.png Rings the train bell.

Properties.PNG Command Properties:

  • <kuid2:66277:80002:1> bellz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

Notes.PNG Notes:

the locomotive must be equipped with a working bell.

PageLink2.PNG Related Commands:

  • Hornz - gives a blast of the horn (or whistle)
  • HornzExtended - gives a specified number of horn blasts


Couple

CMD Couple.png The AI driver moves the train (or just the locomotive if it is by itself) to couple with the specified wagon.

Properties.PNG Command Properties:

  • <kuid:-3:10081> Couple
  • Base Command

Settings.PNG Command Settings:

  <list of available wagons> - select a wagon to couple to
  

Notes.PNG Notes:

  1. The target wagon must be at the end of a consist or by itself. If the target is coupled in between other wagons then no coupling will take place.
  2. There must be a clear path to the target wagon.

PageLink2.PNG Related Commands:

  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Couple At Trackmark

CMD Couple At Trackmark.png The AI driver moves the train (or just the locomotive if it is by itself) to couple with the wagon that is closest to a specified trackmark.

Properties.PNG Command Properties:

  • <kuid:2:57145:81100:1> Couple At Trackmark
  • DLS Command by marzipan

Settings.PNG Command Settings:

  <list of available trackmarks> - select a trackmark
  

Notes.PNG Notes:

  1. The end wagon of a consist must be within the effect radius of the trackmark. If there is no wagon with the radius then no coupling will take place.
  2. The train will couple to the wagon closest to the trackmark and that may mean navigating to the other end of the consist.
  3. There must be a clear path to the target wagon.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons

WikiLink.PNG Trainz Wiki Links:


Decouple

CMD Decouple.png The train is decoupled at the specified wagon (does not work in Driver Setup Rule).

Properties.PNG Command Properties:

  • <kuid:-3:10082> Decouple
  • Base Command

Settings.PNG Command Settings:

  <list of available wagons> - select a wagon to decouple from

Issues.PNG Known Issues:

  • This command does not work when added to a driver's command list in the Driver Setup Rule in Surveyor but it does work when manually added to the driver's command list in Driver

Notes.PNG Notes:

  1. If programming a driver via the Driver Setup Rule, use the alternative commands Decouple DLX, Decouple Number #, Uncouplez or UncouplezFrom
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple DLX

CMD DecoupleDLX.png The train is decoupled at the specified wagon identified by name or number (upto 99 wagons), or at a random location.

Properties.PNG Command Properties:

  • <kuid2:160293:100120:2> Decouple DLX
  • DLS Command by trev999

Settings.PNG Command Settings:

  When Used in Surveyor using the Driver Setup Rule
     <1-33> - select a wagon numbered 1 to 33 where 1 is the wagon (or tender) immediately following the locomotive
     <34-66> - select a wagon from 34 to 66
     <67-99> - select a wagon from 67 to 99
     <at position determined by>
        <consist_count> - requires the use of the special_instruction driver command
        <a random number> - a random number which may be beyond the last wagon in the consist
  When used in Driver Mode
     <1-33> - each wagon is numbered and named. Select a wagon numbered 1 to 33 (or to the last wagon in that range) 
        where 1 is the wagon (or tender) immediately following the locomotive
     If there are more than 33 wagons, then
        <34-66> - each wagon is numbered and named. Select a wagon from 34 to 66 (or to the last wagon in that range)
     if there are more than 66 wagons, then
        <67-99> - each wagon is numbered and named. Select a wagon from 67 to 99 (or to the last wagon in that range)
     <at position determined by>
        <consist_count> - requires the use of the special_instruction driver command
        <a random number> - a random number upto and including the last wagon in the consist

Notes.PNG Notes:

The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple Head N

CMD Decouple.png The train is decoupled to leave the selected number (N) of wagons left in the consist.

Properties.PNG Command Properties:

  • <kuid2:46162:70002:12> Decouple Head N
  • DLS Command by josefpav

Settings.PNG Command Settings:

  <select wagon number> - select the number of wagons (sorted by ASCII code not numerical value) to be left in the consist after the decoupling. 
        1 = the lead loco only (without its tender), 2 = loco + first wagon (which could be the tender), upto 75.

Notes.PNG Notes:

The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple Number #

CMD DecoupleNumber.png The specified wagon number (#) and any following wagons will be uncoupled from the locomotive and consist.

Properties.PNG Command Properties:

  • <kuid2:147570:80008:1> Decouple number #
  • Built-in Command by erniesouchak

Settings.PNG Command Settings:

  <number> - select a wagon number (1-40) to decouple from.

Notes.PNG Notes:

  1. The first locomotive is #1, the second locomotive (if any) or the tender (on a steam locomotive) is #2, etc.
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Hornz

CMD Hornz.png Gives one blast of the train horn or whistle.

Properties.PNG Command Properties:

  • <kuid2:66277:80001:2> Hornz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

PageLink2.PNG Related Commands:

  • Bellz - rings the locomotive bell (if it has one)
  • HornzExtended - gives a specified number of horn blasts


HornzExtended

CMD HornzExtended.png Gives a specified number of blasts of the train horn or whistle.

Properties.PNG Command Properties:

  • <kuid:478639:100034> HornzExtended
  • Built-in Command by ffccnn

Settings.PNG Command Settings:

Select one of <Play once>
              <Play twice>
              ... up to ...
              <Play 10 times>

Notes.PNG Notes:

When the command is executed, the AI will immediately move onto the next command in the sequence and will blast the horn during the execution of the following driver commands until the set count has been reached

PageLink2.PNG Related Commands:

  • Bellz - rings the locomotive bell (if it has one)
  • Hornz - gives one blast of the horn or whistle


MoveTurntable

CMD MoveTurntable.png Moves the specified turntable to the specified track position.

Properties.PNG Command Properties:

  • <kuid2:609850:100018:1> MoveTurntable
  • Built-in Command by vandragonax

Settings.PNG Command Settings:

  <name of turntable> - select the named turntable (see Notes below).
  <track #> or <relative track movement> - select the track number (0 = 1st track) or a relative movement (prev, next)

Notes.PNG Notes:

The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify all the turntables and the number of tracks they have.

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Priorityz

CMD Priorityz.png Sets the train priority value.

Properties.PNG Command Properties:

  • <kuid2:66277:80003:1> priorityz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

<value> - select train priority value 1, 2 or 3

Notes.PNG Notes:

The Priority value identifies the importance of the train for the Priority Trackmarkers. Usually (a guide only):-
  • Priority 1 = Express trains
  • Priority 2 = Local Expresses or Fast Freights
  • Priority 3 = Slow Local Freights or All Stops Services

WikiLink.PNG Trainz Wiki Links:


Run Around

CMD RunAround.png Uncouples the locomotive (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon.

Properties.PNG Command Properties:

  • <kuid:-3:10083> Run Around
  • Base Command

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. There must be a path for the locomotive to follow from one end of the train to the other.
  2. The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.

PageLink2.PNG Related Commands:

  • Run Around Ex - performs the run around only if there is no loco already in position at the other end


Run Around Ex

CMD RunAroundEx.png Uncouples the locomotive(s) (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon but ONLY if the other end of the train does not already have a locomotive in place.

Properties.PNG Command Properties:

  • <kuid2:117667:83:3> Run Around Ex
  • DLS Command by nicroman

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. There must be a path for the locomotive to follow from one end of the train to the other.
  2. The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
  3. There must be no locomotive already coupled to the destination end of the train.

PageLink2.PNG Related Commands:

  • Run Around - unconditionally performs the run around


Uncouplez

CMD Uncouplez.png Uncouples the locomotive (plus tender if present) from the train.

Properties.PNG Command Properties:

  • <kuid2:66277:80000:1> UnCouplez
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


UncouplezFrom

CMD Uncouplez.png Uncouples the train at the wagon specified.

Properties.PNG Command Properties:

  • <kuid2:66277:80005:2> UnCouplezFrom
  • Built-in Command by smileyman

Settings.PNG Command Settings:

  <number> - select a wagon number (0-20) to decouple from.

Notes.PNG Notes:

  1. The first wagon after the locomotive (or the locomotive and tender) is #0, the second wagon is #1, etc.
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist


Back to Top

Navigation Commands


AutoDrivePastSignal

CMD AutoDrivePastSignal.png Instructs the AI driver to drive under Autopilot until the entire train clears the specified signal but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed. The train will slow to a halt after passing the signal.

Properties.PNG Command Properties:

  • <kuid2:61392:7101:1> AutoDrivePastSignal Command
  • DLS Command by pguy

Settings.PNG Command Settings:

  Select <signal name> from Session list

Notes.PNG Notes:

  • It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches

PageLink2.PNG Related Commands:

  • AutoPilot - drives continuously or until a specified trackmark has been passed


Autopilot

CMD AutoPilot.png Instructs the AI driver to drive but the AI will not set any junction switches so the train will follow whatever path is set ahead of it. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid2:71155:60001:5> Autopilot Command
  • DLS Command by _mutton_

Settings.PNG Command Settings:

Select one of
   <activate> - starts the Autopilot Command. This will only terminate when the Autopilot Command is removed from the driver command line
   <stop at track mark> - select a trackmark from the session list. Starts the Autopilot Command and drives until the train reaches the selected trackmark (see Notes below)

Notes.PNG Notes:

  1. It is the users responsibility to set all junction switches ahead of the train. The AI will not set the switches
  2. If the Stop at track mark option is used then:-
  • the train will not set a path to the track mark, that is the users responsibility
  • the train will run at the full posted line speed upto the track mark and then it will slow to a stop
  • if the track mark is never reached because the correct path has not been set, the train will continue as it would for the activate option

PageLink2.PNG Related Commands:


Drive To

CMD IndustryIcon.png Instructs the AI driver to Drive, via the shortest available path, to the designated Industry (including Passenger Stations). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11058> Drive To
  • Base Command

Settings.PNG Command Settings:

Select <name of industry> or industry enabled passenger station from the session list
  if applicable <name/number of track or platform> for industries and stations that have identified active platforms, tracks or loading bays

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:


Drive To Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11149> Drive To Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the destination. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Drive Via Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will NOT attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:11209> Drive Via Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

  1. This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
  2. If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will not attempt to find an alternative path to the designated trackmark. This can lead to the train stopping and waiting indefinately until the blockage is removed.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Navigate To

CMD IndustryIcon.png Instructs the AI driver to Navigate, via the shortest available path, to the designated Industry (including Passenger Station). Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the industry. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10058> Navigate To
  • Base Command

Settings.PNG Command Settings:

Select <name of industry> or industry enabled passenger station from the session list
  if applicable <name/number of track or platform> for industries and stations that have identified active platforms, tracks or loading bays

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

  • Drive To - does not seek alternative paths if blocked


Navigate To Trackmark

CMD NavigateTo.png Instructs the AI driver to Navigate, via the shortest available path, to the designated Trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10149> Navigate To Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the destination. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Navigate Via Trackmark

CMD NavigateTo.png Instructs the AI driver to Drive, via the shortest available path, to and through the designated Trackmark. If there are no further commands then the AI will halt after passing the trackmark. Switches ahead of the train that are not locked against the AI will be set to allow the train to proceed and reset after the train has cleared the switch. The AI driver will attempt to find a way around blockages when calculating the shortest path to the trackmark. All signals and speed signs are obeyed.

Properties.PNG Command Properties:

  • <kuid:-3:10209> Navigate Via Trackmark
  • Base Command

Settings.PNG Command Settings:

Select <name of trackmark> from the session list

Notes.PNG Notes:

  1. This command is used to direct the AI along a set route to a final destination which is not normally the trackmark identified in this command.
  2. If the AI driver is blocked (e.g. by another train, a locked signal or switch) it will attempt to find an alternative path to the designated trackmark. This can lead to the train traveling backwards and down the wrong track.

PageLink2.PNG Related Commands:

WikiLink.PNG Trainz Wiki Links:


Back to Top

Session Management Commands


Copy Commands From

CMD CopyCommandsFrom.png Copies a driver schedule from a schedule library or another driver.

Properties.PNG Command Properties:

  • <kuid2:192081:1:7> Copy Commands From
  • Built-in Command by brummfondel

Settings.PNG Command Settings:

Append - From Library - select a saved schedule from Schedule Library and add it to the end of the current schedule (if any)
Append - From Vehicle - select a vehicle, copy its driver commands and add them to the end of the current schedule (if any)
Insert - From Library - select a saved schedule from Schedule Library and insert it into the current schedule (if any)
Insert - From Vehicle - select a vehicle, copy its driver commands and insert them into the current schedule (if any)

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Delete Train

CMD DeleteTrain.png Deletes the train from the session.

Properties.PNG Command Properties:

  • <kuid2:116387:15:3> Delete Train
  • Built-in Command by maggs

Settings.PNG Command Settings:

None


Insert Buff Label

CMD InsertBuffLabel.png Inserts a driver command as a label for a block of driver commands.

Properties.PNG Command Properties:

  • <kuid:160293:101002> Insert buff label
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number> - select the label number (1 to 10)

Notes.PNG Notes:

Up to 10 labels can be inserted into each drivers command list

PageLink2.PNG Related Commands:

  • Jump to Label - unconditionally jumps to a named command label
  • Skip if Session Variable - conditionally jumps to the named command label if a selected session variable meets a set condition


Jump to Label

CMD JumpToLabel.png Unconditionally jumps to a named command label.

Properties.PNG Command Properties:

  • <kuid2:160293:101003:2> Jump to label
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number> - select the label number (1 to 20)

Notes.PNG Notes:

A label (Insert Buff label driver command) with the matching label number must be added to the driver commands

PageLink2.PNG Related Commands:

  • Insert Buff Label - inserts a driver command as a label for a block of driver commands
  • Skip if Session Variable - conditionally jumps to the named command label if a selected session variable meets a set condition


Layer Control

CMD LayerControl.png Shows or hides a selected layer.

Properties.PNG Command Properties:

  • <kuid:160293:101080> Layer Control
  • DLS Command by trev999

Settings.PNG Command Settings:

Show <list of layers in route and session> - select a layer to make visible
Hide <list of layers in route and session> - select a layer to make invisible

PageLink.PNG Related Session Rules:

Ex.PNG Examples of Use:


Move to Train

CMD MoveToTrain.png Moves the driver with all their remaining driver commands to another train.

Properties.PNG Command Properties:

  • <kuid2:71155:60004:2> Move to train
  • DLS Command by _mutton_

Settings.PNG Command Settings:

All trains <list of locomotives> - select a locomotive from the Session list

Notes.PNG Notes:

  1. The new train must not already have a driver - make sure that the Generate New Drivers for Empty Trains option in the Driver Setup Rule is not ticked.
  2. If the new train does already have a driver then the command and any following commands will not be executed.

WikiLink.PNG Trainz Wiki Links:


Set Custom HUD (SP2 and later)

CMD SetCustomHUD.png Sets a predefined HUD on the screen.

Properties.PNG Command Properties:

  • <kuid2:61392:7006:37> SetCustomHud (SP2 and later)
  • DLS Command by pguy

Settings.PNG Command Settings:

<defHud> - select the default HUD
<altHud> - select the alternate HUD
<named Hud> - select from a number of user defined HUDs

Notes.PNG Notes:

  1. the Quick CustomHud Manager Rule (SP2 and later) must be added to a session for a HUD to be selected by this command
  2. the default and alternate HUDs are preset but can be edited using the above rule
  3. additional user defined and named HUDs can be created with the Quick CustomHud Manager Rule (SP2 and later)

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Skip if Session-Variable

CMD SkipIfSVar.png Jumps to the named command label if a selected session variable meets a set condition.

Properties.PNG Command Properties:

  • <kuid2:160293:101014:3> Skip if session-variable
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <label number if> - select the label number (1 to 20)
   <Variable Name> - from the InputTable Rule
      <condition> - from the InputTable Rule

Notes.PNG Notes:

  1. The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).
  2. A label (Insert Buff Label driver command) with the matching label number must be added to the driver commands

Issues.PNG Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

PageLink2.PNG Related Commands:

  • Insert Buff Label - inserts a driver command as a label for a block of driver commands
  • Jump to Label - unconditionally jumps to a named command label

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Wait Until S-Variable V3

CMD WaitSVariable.png The AI driver will wait until the identified variable matches the condition specified before the next command will be executed

Properties.PNG Command Properties:

  • <kuid2:160293:101006:3> Wait Until S-variable V3
  • DLS Command by trev999

Settings.PNG Command Settings:

Select <Variable Name> - select the variable name from those entered in the InputTable Rule
   Select <Condition><Value> - select from those entered in the InputTable Rule

Notes.PNG Notes:

  • The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).

Issues.PNG Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


WaitUntilSVariable

CMD WaitSVar.png The AI driver will wait until the identified variable matches the condition specified before the next command will be executed

Properties.PNG Command Properties:

  • <kuid2:131986:1006:1> WaitUntilSVariable
  • DLS Command by atilabarut
  • Legacy Command has been replaced by Wait Until S-Variable

Settings.PNG Command Settings:

Select <Variable Name><Condition><Value> - from the InputTable Rule

Notes.PNG Notes:

  • The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify the session variable(s), test condition(s) and value(s).

[[[file:Issues.PNG|link=]] Known Issues:

  • TANE Sessions containing driver commands that use variables may not work correctly when imported into TRS19. The solution is to delete and then reinsert these commands in the imported Sessions in TRS19

[file:PageLink2.PNG|link=]] Related Commands:

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Back to Top

Train Operation Commands


Bellz

CMD Bellz.png Rings the train bell.

Properties.PNG Command Properties:

  • <kuid2:66277:80002:1> bellz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

Notes.PNG Notes:

the locomotive must be equipped with a working bell.

PageLink2.PNG Related Commands:

  • Hornz - gives a blast of the horn (or whistle)
  • HornzExtended - gives a specified number of horn blasts


Couple

CMD Couple.png The AI driver moves the train (or just the locomotive if it is by itself) to couple with the specified wagon.

Properties.PNG Command Properties:

  • <kuid:-3:10081> Couple
  • Base Command

Settings.PNG Command Settings:

  <list of available wagons> - select a wagon to couple to
  

Notes.PNG Notes:

  1. The target wagon must be at the end of a consist or by itself. If the target is coupled in between other wagons then no coupling will take place.
  2. There must be a clear path to the target wagon.

PageLink2.PNG Related Commands:

  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Couple At Trackmark

CMD Couple At Trackmark.png The AI driver moves the train (or just the locomotive if it is by itself) to couple with the wagon that is closest to a specified trackmark.

Properties.PNG Command Properties:

  • <kuid:2:57145:81100:1> Couple At Trackmark
  • DLS Command by marzipan

Settings.PNG Command Settings:

  <list of available trackmarks> - select a trackmark
  

Notes.PNG Notes:

  1. The end wagon of a consist must be within the effect radius of the trackmark. If there is no wagon with the radius then no coupling will take place.
  2. The train will couple to the wagon closest to the trackmark and that may mean navigating to the other end of the consist.
  3. There must be a clear path to the target wagon.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons

WikiLink.PNG Trainz Wiki Links:


Decouple

CMD Decouple.png The train is decoupled at the specified wagon (does not work in Driver Setup Rule).

Properties.PNG Command Properties:

  • <kuid:-3:10082> Decouple
  • Base Command

Settings.PNG Command Settings:

  <list of available wagons> - select a wagon to decouple from

Issues.PNG Known Issues:

  • This command does not work when added to a driver's command list in the Driver Setup Rule in Surveyor but it does work when manually added to the driver's command list in Driver

Notes.PNG Notes:

  1. If programming a driver via the Driver Setup Rule, use the alternative commands Decouple DLX, Decouple Number #, Uncouplez or UncouplezFrom
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple DLX

CMD DecoupleDLX.png The train is decoupled at the specified wagon identified by name or number (upto 99 wagons), or at a random location.

Properties.PNG Command Properties:

  • <kuid2:160293:100120:2> Decouple DLX
  • DLS Command by trev999

Settings.PNG Command Settings:

  When Used in Surveyor using the Driver Setup Rule
     <1-33> - select a wagon numbered 1 to 33 where 1 is the wagon (or tender) immediately following the locomotive
     <34-66> - select a wagon from 34 to 66
     <67-99> - select a wagon from 67 to 99
     <at position determined by>
        <consist_count> - requires the use of the special_instruction driver command
        <a random number> - a random number which may be beyond the last wagon in the consist
  When used in Driver Mode
     <1-33> - each wagon is numbered and named. Select a wagon numbered 1 to 33 (or to the last wagon in that range) 
        where 1 is the wagon (or tender) immediately following the locomotive
     If there are more than 33 wagons, then
        <34-66> - each wagon is numbered and named. Select a wagon from 34 to 66 (or to the last wagon in that range)
     if there are more than 66 wagons, then
        <67-99> - each wagon is numbered and named. Select a wagon from 67 to 99 (or to the last wagon in that range)
     <at position determined by>
        <consist_count> - requires the use of the special_instruction driver command
        <a random number> - a random number upto and including the last wagon in the consist

Notes.PNG Notes:

The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple Head N

CMD Decouple.png The train is decoupled to leave the selected number (N) of wagons left in the consist.

Properties.PNG Command Properties:

  • <kuid2:46162:70002:12> Decouple Head N
  • DLS Command by josefpav

Settings.PNG Command Settings:

  <select wagon number> - select the number of wagons (sorted by ASCII code not numerical value) to be left in the consist after the decoupling. 
        1 = the lead loco only (without its tender), 2 = loco + first wagon (which could be the tender), upto 75.

Notes.PNG Notes:

The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Decouple Number #

CMD DecoupleNumber.png The specified wagon number (#) and any following wagons will be uncoupled from the locomotive and consist.

Properties.PNG Command Properties:

  • <kuid2:147570:80008:1> Decouple number #
  • Built-in Command by erniesouchak

Settings.PNG Command Settings:

  <number> - select a wagon number (1-40) to decouple from.

Notes.PNG Notes:

  1. The first locomotive is #1, the second locomotive (if any) or the tender (on a steam locomotive) is #2, etc.
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


Hornz

CMD Hornz.png Gives one blast of the train horn or whistle.

Properties.PNG Command Properties:

  • <kuid2:66277:80001:2> Hornz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

PageLink2.PNG Related Commands:

  • Bellz - rings the locomotive bell (if it has one)
  • HornzExtended - gives a specified number of horn blasts


HornzExtended

CMD HornzExtended.png Gives a specified number of blasts of the train horn or whistle.

Properties.PNG Command Properties:

  • <kuid:478639:100034> HornzExtended
  • Built-in Command by ffccnn

Settings.PNG Command Settings:

Select one of <Play once>
              <Play twice>
              ... up to ...
              <Play 10 times>

Notes.PNG Notes:

When the command is executed, the AI will immediately move onto the next command in the sequence and will blast the horn during the execution of the following driver commands until the set count has been reached

PageLink2.PNG Related Commands:

  • Bellz - rings the locomotive bell (if it has one)
  • Hornz - gives one blast of the horn or whistle


MoveTurntable

CMD MoveTurntable.png Moves the specified turntable to the specified track position.

Properties.PNG Command Properties:

  • <kuid2:609850:100018:1> MoveTurntable
  • Built-in Command by vandragonax

Settings.PNG Command Settings:

  <name of turntable> - select the named turntable (see Notes below).
  <track #> or <relative track movement> - select the track number (0 = 1st track) or a relative movement (prev, next)

Notes.PNG Notes:

The InputTable Rule must be installed in the session before this command can be used. This rule must be configured to identify all the turntables and the number of tracks they have.

PageLink3.PNG Required Session Rules:

Rules that MUST be added to the Session for this Driver Command to operate


Priorityz

CMD Priorityz.png Sets the train priority value.

Properties.PNG Command Properties:

  • <kuid2:66277:80003:1> priorityz
  • Built-in Command by smileyman

Settings.PNG Command Settings:

<value> - select train priority value 1, 2 or 3

Notes.PNG Notes:

The Priority value identifies the importance of the train for the Priority Trackmarkers. Usually (a guide only):-
  • Priority 1 = Express trains
  • Priority 2 = Local Expresses or Fast Freights
  • Priority 3 = Slow Local Freights or All Stops Services

WikiLink.PNG Trainz Wiki Links:


Run Around

CMD RunAround.png Uncouples the locomotive (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon.

Properties.PNG Command Properties:

  • <kuid:-3:10083> Run Around
  • Base Command

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. There must be a path for the locomotive to follow from one end of the train to the other.
  2. The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.

PageLink2.PNG Related Commands:

  • Run Around Ex - performs the run around only if there is no loco already in position at the other end


Run Around Ex

CMD RunAroundEx.png Uncouples the locomotive(s) (plus tender if present) from the train, navigates to the other end of the train and couples to the last wagon but ONLY if the other end of the train does not already have a locomotive in place.

Properties.PNG Command Properties:

  • <kuid2:117667:83:3> Run Around Ex
  • DLS Command by nicroman

Settings.PNG Command Settings:

None

Notes.PNG Notes:

  1. There must be a path for the locomotive to follow from one end of the train to the other.
  2. The locomotive must have sufficient clear space, free of track switches and signals, at both ends of the train to perform this movement.
  3. There must be no locomotive already coupled to the destination end of the train.

PageLink2.PNG Related Commands:

  • Run Around - unconditionally performs the run around


Uncouplez

CMD Uncouplez.png Uncouples the locomotive (plus tender if present) from the train.

Properties.PNG Command Properties:

  • <kuid2:66277:80000:1> UnCouplez
  • Built-in Command by smileyman

Settings.PNG Command Settings:

None

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • UncouplezFrom - decouples a consist at a specific place. Upto 20 wagons


UncouplezFrom

CMD Uncouplez.png Uncouples the train at the wagon specified.

Properties.PNG Command Properties:

  • <kuid2:66277:80005:2> UnCouplezFrom
  • Built-in Command by smileyman

Settings.PNG Command Settings:

  <number> - select a wagon number (0-20) to decouple from.

Notes.PNG Notes:

  1. The first wagon after the locomotive (or the locomotive and tender) is #0, the second wagon is #1, etc.
  2. The main problem with using decoupling commands in the Driver Setup Rule is that the number and identity of the wagons in a consist may not be known when the command is added to a driver's command list.

PageLink2.PNG Related Commands:

  • Couple - couples wagons in a consist
  • Couple At Trackmark - couples to the wagon closest to a specified trackmark
  • Decouple - decouples a consist at a specific place (does not work in the Driver Setup Rule)
  • Decouple DLX - decouples a consist at a specific, or a random, place. Upto 99 wagons
  • Decouple Head N - decouples a consist to leave set number (N) of wagons in the consist. Upto 75 wagons
  • Decouple Number # - decouples a consist at a specific place. Upto 40 wagons
  • Uncouplez - decouples the locomotive (or locomotive + tender) from a consist


Back to Top



Trainz Wiki

TrainzWiki.png

More Tutorials and Guides to Using Trainz

Personal tools